Resume - Fourteen years experience in E&P oil industry. Good knowledge in drilling and pr...

Misco Jobs

Resume #41758

CONTACT INFORMATION:
View contact information...

EXPERIENCE:
June 2003 to present Petroleum Engineering Manager
Manage several petroleum engineers (5 x local / 1 x expat) and 1 x contractor. The group is in charge of Completion / DST / Well services work/ Work-over
Design and Perform:
- Multi-well work-over campaign on un-manned WHP using a jack-up
- DST exploration wells
- Selective Completion horizontal wells
- Stand-alone sand screen completion
- Others rigless well services work

2000 to June 2003 Sr. Petroleum engineer / Deputy Petroleum Manager
Play a leading role in a group of 3 x local / 4 x expat petroleum engineers. The group is in charge of Completion / DST / Well services work/ Work-over

Jan.1999 to 2000 Petroleum engineer
Design, prepare and supervise on site following work:
- Single trip completion string with permanent pressure gauges, gas lift mandrel of four horizontal/highly deviated wells
- Matrix acidizing on basement wells (With coiled tubing)
- DST with acid wash on exploration wells
- Slickline bottom hole pressure survey on producers
- Kick off and clean-up new wells using coiled tubing and nitrogen with surface testing facilities on a Jack up rig.

Jul.'97; to Jan. 1999 Drilling engineer and petroleum engineer
After appr. 3 months worked in Drilling department as Drilling Engineer, I was transferred to Petroleum department
Involved in designing and execution a fracturing job offshore Vietnam

Nov.'96; to Jun.'97; Mobil drilling engineer.
Bids evaluation and contractors selection: Evaluated cementing and drilling fluid bids
Drilling program preparations: Bit selection, hydraulic program calculation...
Final drilling report preparation
Emergency response manual and end-well safety and environment report. Liaison coordinator between MJC and Goverment 0officers

Jan.'96; to Oct.'96; Headquarter Drilling Engineer
Monitor offshore drilling and completion operations

Aug.'95; to Dec.'95; BHPP Drilling Engineer
I was operational engineer for a vertical well with TD at 3200m.
I was PIC of all related works to that well including budget, drilling program, daily report, load-out list, cost and time analysis, invoicing final reports, well cost and reconcile well cost, accrual processing etc.
After BHP drilling operations suspension in SEA, I was only drilling engineer in office. In order to prepare for one more campaign which may be carried out, I was PIC for design well path for one injection well, tendering preparations, KPI (Key performance indicators) establishment etc.

Oct.'94; to Aug.'95; BHP work-over engineer - SSWL (Subsea wireline campaign) for subsea wells interventions from floating production unit (FPU). My project was to modify a SSTRT to use as bottom SSWL ass'y.
In order to do that, I have modified followings items on SSTRT:
- Soft landing sockets
- ROV docking bar
- ROV control panel
- Positioning beacon & bullseye holders
Project included two months offshore operation for 3 interventions from FPU. Objective were to shift sliding sidedoor, run/recover pressure gauges, run PLT on slickline etc.

Sep.'93; to Oct.'94; BHP (Broken Hill Proprietary ) drilling engineer
Worked in drilling team for drilling several sub-sea wells, subsea completion and flow line installation
I had worked as night shift company representative on semi-sub Treasure Seeker and Aleutian Key. My main functions were:
- Monitor operations by night and made simple decisions
- Inventory and equipment list preparation
- Manifest in-out
- Drilling reports preparation
There were directional wells with max. inclination of 50„a and TD of 4000mSS.
During these hitches, I have involved in subsea completion and subsea flow line installation operations.

Jun.'92; to Sep.'93; Drilling engineer.
As a fresh graduated engineer, I had good chance to be familiar with offshore drilling operations. Especially, there are difficult wells with lost circulation, kick and blow-out.

SPOKEN LANGUAGES:
Fluent in two languages (Reading, Writing, Speaking): Vietnamese, English

COMPUTER SKILL:
Familiar with both type of PC and Macintosh computer and most of popular software. Command on using Windows based office softwares

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 7054)

Go to Search Parameters...

Brief Description

Prefer to jobs that generate/analyze data in quantitative or qualitative

I am a B.Tech degree holder in Instrumentation passed out from Madras Institute Of Technology, Madras, India and I am having Sixteen years of experience in the field of Instrumentation in maintenance, construction, commissioning and design in petrochemical, refinery, power plants

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

•Engineering, Project Management, Construction Management, Cost Control & Sub-Contract Co-ordination •Oil & Gas, Petro-chem, Cross country Piping •Shutdowns/ Tie-ins •Equipment Installation/ maintenance and commissioning •Structural Fabn & Erecn •Manpower and Resources Planning

I have been working in the UAE since October 2001 as Mechanical Maintenance Supervisor/Commissioning Engineer in the Oil/Gas and Power Industry. Prior to that I held senior positions in the Military as Ship's Chief Engineer, Engine Room I/C, Instructor and In charge of training.

Total work experience of 5 years as Chemical engineer. Core competency on steady state process simulation, optimization & de-bottlenecking in the field of Petrochemical & Refinery

Large Water treatment plant like RO plant, DM Plant, Ultra filtration plant, Pretreatment plant Operation, Maintenance and analysis. Large Power plant Boiler(High Pressure Boilers) Water Chemical Treatment and Analysis, Cooling Tower water chemical treatment and analysis, Environmental(Ambient air,

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Geologist/Hydrogeologist, 18 years experience, environmental, sedimentary and glacial bedrock and soil deposits, 3-dimensional characterization of fracture zones in bedrock, LNAPL and DNAPL migration pathway analysis.

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have 20+ years experience in all aspects of electical work, i.e. construction, testing and inspection and commissioning at home and abroad, onshore and offshore.

Reliability Engineer

A good team player with proven communication skills and ability to Motivate People, drive changes and strive for continual Improvement; Excellent People Management and Interpersonal Skills.

Scaffolding engineer Certified from CITB UK.

I have a M.S. in Petroleum Engineering with emphasis in flow assurance issues. Through my experience I have gain great communication and technical writing skills. Also been in a project has gave me the ability to work well both in teams and individually.

Piping designer, Pipe stress engineer

Mechanical Engineer (Piping- Lyout/PDS)

Working as a instrument technician in al- jubail petrochemical plant saudi arabia. involve in on line instrument and maintenace in low low density poly ehthelene plant(LLDPE) AND (LDPE) low density poly etheylene plabnmt.good knowlawdge of all type honey well ,yokogawa,foxboro and rosemount fisher

Designer/Drafter with Inventor experience.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

instrument supervisor libiya.

Drilling Engineer with 4 years experience ,working for a leading Exploration and Production Operator.• Responsible for planning and executing well designs and workover programmes for producer and water injection wells.• Monitor follow all phases of the daily drilling and completion operations, perfo

i am project manager assistant in pressure vessel and road tanks,cylider and on/offsure projects in industrial inspection company

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Schlumberger 17 years Coiled Tubing / Nitrogen services/Fracturing

Design and drafting OIl and Gas processign facilities, Structural, Piping, Civil. 7 Years experience with 3D CADWORX modelling on Canadian and international projects. Recently worked on Enterprise's Meeker II facility as well as Green River Gas Plant (PROPAK) early 90's.

Bilingual English-Spanish Project Manager with over 6 years of experience working for diverse industries including the Oil, the light and heavy construction, and the Steel Production.

I would like to apply with your company for the position of a INSTRUMENT SUPERVISOR /TECHNICIAN I have 11 years of oilfield ,gas plant ,power plant and some process plants experience as an SUPERVISOR, TECHNICIAN . I am having good work experiance with clients like ENI , IRAN PHASES 4 & 5 KOC -

Responsible for crude evaluation, expansion project related configuration studies, perspective planning and scenario analysis and retro analysis.

I have completed my Masters degree in Chemical Engineering from Lamar University. I have experience in ASPEN PLUS, ASPEN DYNAMICS, HYSYS, PRO-II for two years. I did my internship in Dynamic Engineering Purity Inc. for six months.

HYSYS simulations, process design, optimization, Process flow diagrams (PFD) and P&ID

Presently I am working with M/s B. S. Chaudhry & Co. as a Mud Engineer on E 760-II (1600 HP SCR), M 900-1 (900 HP), M 750 (750 HP), Cardwell-6, & Cardwell-7 since Jan.-2007 to till date continue at Mehsana Asset under MMC contract with ONGCL

Having experience in Mechanical Engineering in the field more than 10 years of Oil and Gas and Manufacturing industries mostly in engineering and inspections. Has worked in INDIA,and SINGAPORE on Onshore & Offshore.

Substation Automation engineer with 5 years of experience

DCS, Control system and Maintenance Engineer

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out