Resume - Working as: Heath Safety and Environmental Engineer for Snamprogetti S.A. Ltd At...

Misco Jobs

Resume #4250

CONTACT INFORMATION:
View contact information...

March 02 1974
MALE INDIAN

SOFTWARE AND HARDWARE SKILLS
MS OFFICE Front End Back End Web Technologies Operating System
MS word, Excel, MS front page, MS Outlook
PowerPoint, Access C++, VB (6.0)
MS SQL (7.0) Programming
SICON-COINF HTML, JAVA Windows NT (4.0),
Red Hat Linux (6.0)

EDUCATIONAL /TECHNICAL QUALIFICATION

☻ B. Tech in Chemical Engineering from the University of Madras with Distinction

☻Post graduate in Environmental Pollution control from National Institute for Ecology & Environment (NIEE) with Distinction

☻ IOSH -Managing Safely in Oil and Gas Industries- Jointly conducted by Inst of Occupational Safety and Health (IOSH) and Petroleum Development of Oman

☻ Diploma in Chemical Technology form the Institute of Chemical Technology, Tharamani, Adyar Chennai-113 with Distinction

☻ Diploma in Industrial safety from Annamalai University, Annamalai Nagar

Academic Achievements in B.Tech
Class Topper in 1) Safety in Chemical process Industries and hazard analysis 1) Chemical Reaction Engg, 2) Bio Chemical Engg, 3) Process Equipment Design 4) Instrumentation and Process Control

Driving Licence Details: 1) INDIAN - D.L.No F/TN/07X/000627/2001
LMV -30/01/2001,VALID UPTO 29 January 2021
2) VALID SAUDI DRIVING LICENCE:

LANGUAGES English Hindi Arabic Tamil Telugu Malayalam zPROFICIENCY Good Fair Working level Good Good Fair

CULTURAL QUALITY

Self-starter, energetic, Self-directed. Able to develop professional relationships within the department and with other department personnel. Ability to work well with other individuals. Provide a strong customer service relationship with organizational customers. Ability to interface with all levels of the organization in all areas of the facility.

LOSS PREVENTION COURSES ATTENDED AT SAUDI ARMCO

Name of the course Institution Attended Examining authority
Work permit receiver Rastanura refinery training Dvn-SA Loss prevention Dept
Hazards recognition course Rastanura refinery training Dvn-SA Loss prevention Dept
Gas testing Rastanura refinery training Dvn-SA Loss prevention Dept
SCBA Standard Rastanura refinery training Dvn-SA Loss prevention Dept
Fire fighting Rastanura refinery training Dvn-SA Loss prevention Dept
Scaffolding inspector Rastanura refinery training Dvn-SA Consulting services Dept, Saudi Armaco
H2S Course Rastanura refinery training Dvn-SA Loss prevention Dept

OTHER TECHNICAL COURSES ATTENDED at PDO (Oman-Muscat)

Name of the Course- Institution Attended- Examining Authority
Supervising Safety- National Training Institute Nimr, Muscat -Petroleum Development of Oman.

Permit Work Signatories-National Training Institute Nimr, Muscat-Petroleum development of Oman

Incident/ Accident Notification/ Investigation Reporting & Follow up Procedures National Training Institute Nimr, Muscat-Petroleum Development of Oman.

Basic Life support &First Aider Course- National Training Institute,
Nimr, Muscat- Petroleum Development of Oman.

H2S Awareness and Escape-Occupational Training institute, Muscat- Petroleum Development of Oman.

Environmental Awareness-
Occupational Training institute, Muscat- Petroleum Development of Oman. (PDO)

PAPERS PRESENTED

TOTALLY 8 PAPERS WERE PRESENTED AT NATIONAL AND INTER
NATIONAL UNIVERSITIES ALL OVER INDIA AS MENTIONED BELOW

ƒá "ZERO DISCHARGE" Chess of 1997 at Sidhaganga Institute of Technology, Tumkur, KARNATAKA,April 4 to 5 1997.(Nanthan.R & R.Srinivasagopalan )

ƒá "SONO CHEMICAL REACTION ENGINEERING", Cognizance'97 Shanmuga college of Engg, Tanjavur-613402, September 26-27, 1997.

ƒá "FIGHT CORROSION WITH POWDER COATING" -The technology for 21 st Centuary-Ripples'97 at ANDHRA UNIVERSITY, Visakapatinam, A.P,November 25-26, 1997

ƒá "THE ABATEMENT OF POLLUTIONS FROM POLLUTION CONTROL SYSTEMS" Ripples'97 Andhra University, Visagapattinam, A.P, November 25-26, 1997

ƒá "VOC & COC EMISSION CONTROL"- By regenerative oxidation method, Chemosphere'97 at Sri Venkateswara University of Engg, Tirupati, A.P, Dec 8-9, 1997

ƒá "ZERO DISCHARGE- FROM REFINERIES" Paper presented in the poster session of 50'th Annual conference Chemcon'97 Golden jubilee international seminar, jointly conducted by I.I.Ch.E and Indian institute of technology, In Delhi Dec14-18, 1997.

ƒá "RECOVERY OF FCC OFFGASES FROM OLEFINS ECONOMICALLY & ECOFRIENDLY", JetChem'97 at St.Joseph college of Engg, J.P.R Nagar, Chennai-119, Dec'97.

ƒá "CONSERVE ENERGY IN DISTILLATION", Paper presented at REC-Surat, April 3-4 1998, Mind bend'98

WORK EXPERIENCE

Working as: HEALTH SAFETY AND ENVIRONMENTAL ENGINEER for Snamprogetti S.A. Ltd At Saudi Aramco
Name of the Client: SAUDI ARAMCO-Qatif Gas Producing Facilities Project (QOSP -1
Complex)
Name of the contractor: SNAMPROGETTI Saudi Arabia ltd
Working since: 18-08-2003 to till date

Working as: HEALTH SAFETY AND ENVIRONMENTAL COORDINATOR for Snamprogetti S.A. Ltd At Saudi Aramco
Name of the Client: SAUDI ARAMCO-RASTANURA REFINERY -KHUFF PROJECT
Name of the contractor: SNAMPROGETTI Saudi Arabia ltd
Working since: 29-03-2002 to 17- 08- 2003

ii) Worked as Safety engineer at KEERTHY BANGALORE PVT LTD -a Large sulphuric acid plant, India.
Nma Name of the client: KEERTHY BANGALORE PVT LTD
Duration worked: 17-3-2002

(III) Worked as: HEALTH, SAFETY & ENVIRONMENTAL ADVISOR (HSE)
Name of the Client: Petroleum Development of Oman (PDO)
Name of the Contractor: Al-Hassan Group of Companies
Sultanate of Oman
Period Work: From 07-09-98 to 30-10-2000

(II) Worked as Safety, Health, Environmental Engr
Name of the Company: IMPERIAL CHEMICAL INDUSTRIES LTD (ICI)
: A Joint venture of ICI - UK, Plc,
: Ennore-Chennai, India
Period Worked: From 06-05-98 to 04-09-98

(I) Worked as Asst Safety officer cum Plant supervisor
Name of the Company: Spic Organic Ltd -A Spic Group Company,
: Manali Industrial Estate,
: Manali, Chennai,India
Duration worked: 01-07-93 to 31-07-95

Please see the appendix # 1 for the detailed work experience
From the above mentioned companies

Appendix # 1

Job descriptions currently at Saudi Aramco Khuff project as HEALTH, SAFETY and ENVIRONMENTAL COORDINATOR

Key competencies that will need to be demonstrated includes the following

Functional leadership in a matrix organization
Management and development of an EHS team
Development of EHS improvement through management systems(HSE-MS)
Development of a positive EHS culture
Expertise in behavioral based safety
Good influencing skills

Leadership & Commitment
To be able to promote a positive EHS culture
To demonstrate EHS commitment through leadership behavior. To effectively chair safety meetings. To be able to effectively and constructively challenge unsafe practice and conditions managing and Improvement.
To effectively participate in site audits/inspections.
To effectively run management system audits.
To understand and apply "root cause" analysis to incident investigation.
To be able to interpret and use data and learning from incidents and leading performance measure Develop and implement active health and safety monitoring system
Develop and implement active health and safety monitoring systems
Develop and review health and safety audit systems
Seek, evaluate and organize information for action
Develop and implement health and safety review systems

Legislation

To understand, and be able to advise on, the key requirements of Aramco's GI'S legislation including regulatory
Permit Risk Assessment and Safe Systems of Work
Identify and evaluate health and safety hazards
Effectively participate in risk assessments
Be able to ensure the quality of method statements
Determine requirements, implement and improve EHS risk control measures
To understand, and be able to advise on, behavior based safety programs
Develop and implement health and safety emergency response systems and procedures
To be able to contribute to improved risk control

Technical Expertise

Influence and keep pace with improvements in EHS practice, internally and externally
Provide up to date EHS advice to others
Promote new EHS methods
Proactively contribute to EHS improvements in the organization
Encourage and support the promotion of H&S
To give tool box talks on numerous topics
To give training on key safety topics, including permits, risk assessment and incident investigation

People Management and Development

To be able to identify and initiate EHS training needs for staff.
To manage a team of HSE advisors
Develop and implement individual and organizational competence in health and safety matters
Develop and implement effective communication systems for health and safety information
Contribute to and enhance consultation and cooperation on EHS
To lead and contribute to meetings and group discussions to solve problems and make decisions

OTHER RESPONSIBILTIES INCLUDES

Working as developing procedure on Safety Awareness, Training of personnel working in Onshore, General Safety, Fire Fighting, Safe Scaffolding, Safe Rigging & Slinging,
H2S protection, Confined space Entry Procedure & Rescue operation, First Aid, Breathing
Apparatus, Toxic and Flammable Gas testing, Inspection of Cranes & Lifting Tackles and also Responsible for risk management and coordination of all relevant Health Safety & Environment (HSE) functions.

Fully experienced in all aspects of fire prevention, fire fighting and Safety procedure related to petrochemical Responsibilities include Training of personnel who come to Onshore for the first time, on subjects like Safety equipment,
Communication system, H2S Environment, Environmental protection, Emergency Alarm system & Breathing Apparatus.

Responsibilities as Health, Safety and Environmental Coordinator at Snamprogetti (Saudi Aramco)

To participate, develop and conduct HAZOP, HAZAN, HAZID, QRA, HSEIA, HRA, EA, HEMP, JHA or JSA, HIP and Safety Cases for the neat khuff condensate fractionation project at SAUDI ARAMCO and modifications are now being carried out on the installed equipments and pipe lines as a proactive measures to maintain the integrity over all area concerned and to make sure that these Safety tools are regularly updated depending upon the changing in job environment and new activities at different phase of the project.

To provide professional advise on design requirements for Fire/Safety and life saving systems guided by the Snamprogetti's HSE philosophies as well as Local and International Safety Design Codes/Standards.

To prepare and review area classification drawings and electrical equipment specifications for hazardous area for existing facilities as well as for projects and modifications to be carried out at this project.

To review and comments on safety and safety designs and drawings, fire and safety protection systems design, Emergency shut down systems, cause effect diagrams for each activities that carries greater hazards

To carry out, review, survey, audit produce assessment reports, recommend corrective actions design modifications and methodology enhancement as required on installed fire and safety protection/detection systems for it's operability, maintainability and adequacy in meeting safety engineering standards, Safety charts and Safety philosophies at the construction site

Knowledge about the Safety Case study and making analysis report for redesigning
/modeling of the plant equipments etc

To prepare scope of work, request for quotations, call for tender and contract document for specifying the safety studies to be conducted by the third parties and to evaluate technical offers and prepare recommendations.

To evaluate the firewater requirement for different process area, passive fire protection systems, safety design basis, escape routes, fixed fire-fighting system, wheel mounted fire-fighting system, fire hydrants requirements at different area as per the fire hazard rating and closely work with SAUDI ARAMCO Loss Prevention department to test the fire alarm and detection system (FACP-projects installed) as per NFPA, assessing the requirement of fire blankets and SCBA at DCS room and other area of the plant

Contribute to and provide professional input to the HSE expertise technical committees and working parties by client-contractors for specific technical HSE issues.

Experienced to conduct environmental impact and health risk assessment (HRA) prior to all new activities, facility development or before any significant modifications are taking place.

To maintain the risk register that contains those HSE hazards and to review this register together with the HSE manual both Snamprogetti and Saudi Aramco when Safety Case is being developed and updated and Environmental aspects also are included in this register.

To evaluate the different type of weekly and daily work permits (Hot, Clod, Confined space entry, Release of hazardous liquids/gases etc) and to make sure that these permits are effectively used by our Sub contractors.

Very familiar in some special safety software tools called SICON-COINF (applicable only to Snamprogetti)- a system designed to gather and catalogue, in homogeneous way, all the data related to the injuries, accidents, waste production and disposal as well as all the general and energy consumption during Snamprogetti project construction phases. The statistical data processing contributes to identify the main incident causes as well as to make the relevant project environmental impact evaluation.
This procedures foresees the following steps:
a) Gathering and recording of the data required by the SICON program (Carried out at the work site)
b) Data analysis and rate calculation adopted by the projects according to ANSI Standards and knowledge about the international standards such as OSHA, BS, UNI

To make sure that Snamprogetti HSE management system (HSE-MS) is in line with the Aramco HSE-MS system and that HSE deliverables are provided on time and in alignment with project requirement, which includes but are not limited to:
a) Safety Policy Development b) Risk assessment c) COSHH, Manual handling, Fire and PPE assessments together with many other areas of Loss control system d) Safe system of Work Development e) Implementing and follow-up of Integrated Audit System (IAS)

Familiar in Logistic Safety System Modeling (LSSM), whereby system effectiveness analysis would be carried out to understand the complete system with respect to operational impact, Support and cost associated with the operation.

Very familiar to handle and close relays with Saudi Aramco Loss Prevention Department (SALPD) and participating site safety walkthrough, site audits, Emergency drills (both desktop and real case emergency)

To maintain the surroundings and work locations neat and tidy

To maintain the MSDS status for all chemicals and effective monitoring of safety precautions against these chemicals are being taken, which includes procuring and supply of correct PPE for the type of chemicals being used, planning about the Disaster/accidental spillage of chemicals and ensuring the stipulative measures as per the government regulations that are being taken.

Planning for the correct method of ablution waste collection and storage as per the Aramco requirement and monitoring the effective disposal of all waste on daily basis.

Segregating different type of wastes with respect to hazardous and non-hazardous and preparing the separate collection point for each and every work locations.

To check the hygienic condition (quality) of water, food that are being supplied to the site personnel and making the regular inspections of camp and accommodation facilities.

Giving effective measures and design requirement for the construction of waste handling and storage facilities and constructing the underground waste storage facilities depending upon the personnel that are being involved in the project.
Teaching and training the site personnel about the hazardous waste and their heath risk and precautions that are being taken to handle them safely and disposing them safely at their storage facilities.

IV) Duties and responsibilities at Keerthy bangalore Pvt limited- India

Coordinating Occupational Health, Safety and Environment activities for the chemical plants e.g. implementation of safety rules, safety audit, maintenance of plant fire and safety facilities, etc.
(III) Duties and Responsibilities at ALHASSAN/PDO-OMAN

Shouldering all responsibilities which includes but are not limited to

Taking care of all safety concerns when working with live gas Pipelines, Oil pipe lines, crude Oil tanker, Tank farm, Knockout drums (KOD), gasturbines, HydrocarbonGascondenser, cooler, Oilproductionstations, Oil/Gas gathering stations, On-Pad oil cellar pits, Gas surge boots installation. Monitoring Safety procedures and regulations during Beam Pump installation and commissioning.

(II) Duties and responsibilities At ICI

Taking care of all safety precautions during handling, loading and Unloading of Solvents like MEK, ACETONE, IPA, and TOLUENE and at reaction section recycling and recovery section. Safety at Utilities section like steam plant, cooling tower, DM plant, N2 plant, Inst/Plant Air section, NaOH, HCl, H2SO4, Cl2 storage system.

Verification and implementation of Hot Work permit, cold work permit, Confined space entry, Job Safety Analysis (JSA), conducting fire drill, safety meeting, Auditing, safety training, HRA, Accident investigation/Reporting, Conversant with MSDS, Reporting to HSE-Manager, Emergency S/D decision making, ETP condition monitoring &integrating with pollution control board.

Above all
* Leadership/Teambuilding * Training/Coaching/Mentoring
* Inspections/Operations * Strategic Planning/Implementation
* Safety/Security Management * Regulatory Compliance/Quality Assurance
* Decisive Management * Organizational Development
* Presentation/Facilitation * Negotiating/Client Relations

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2401 to 2450 of 6432)

Go to Search Parameters...

Brief Description

Can operate waste water treatment, boiler, chiller, waste gas treatment, furnace, kneader, calciner, extruder, drier and knowledge in control room DCS or PLC

Electrical, Instrument, Electronics Engineering 20+ years

Working as: Heath Safety and Environmental Engineer for Snamprogetti S.A. Ltd At Saudi Aramco

ELECTRICAL & ELECTRONIC ENGINEER/SAFETY OFFICER

5 years working experience as Draughtsman in construction, Oil and Gas indutry and steel fabrication.

HND Elect/Elect. Engineering[Telecommunication option].

Attended a workshop on Modern Well Log Data Interpretation from 25th to 30th February-2008 • Exposed to different well logging tools at Schlumberger Company, Mumbai, in Feb-2008 • An overview of seismic data processing and Interpretation in SPIC, ONGC Ltd., Nov-2007 • Observation of different Stru

Drilling and Petrophysics

Instrument Technician/Engineer.Bachelors Degree in Applied Physics and Instrumentation

Experience in Honeywell DCS, HMI, INTOOLS,PLC and SCADA

I am an experienced Chemical Engineering graduate professional with experience in offshore as well as onshore drilling fluids projects co-ordination & execution. I offer significant abilities in execution of Drilling fluids Programs on offshore/onshore as wellsite Drilling Fluids Engineer.

3 years Skill oriented Experience including 2 year onsite Job in Manchester, UK

Helping in the functioning and implementation strategy of Real Time Database Management System (RTDBMS)

Electrical engineering

B-Tech in Mechanical Engineering, Diploma in Oilfield Engineering and Quality Control, ASNT level 2 in NDT interpretation, AutoCAD, MS Office

A seasoned professional with over 4 years of rich experience Automation, PLC, Commissioning & Erection.

Working as senior telecommunications technician for a big gas company.

I am Design Engineer. My most recent experience was design an automatic steel strip coil tensioning and recoiling line . I was responsible for the overall product design, workshop drawings and hydraulic and pneumatic circuits. I developed the first draft of the operator's guide.

Goal oriented loss prevention and emergency response professional with a wealth of qualifications dedicated to providing solutions to challenging problems, to aiding in safe work practices and loss prevention.

Wide experience in oil/gas exploration (off-shore, land, in-house, in the field, & onboard) *12 Yrs.*. INTERESTED: posts with responsibility, challenges, that utilise my skills and expertise, like: marketing, HR, recruitment, client rep, managerial (exploration /E&P),..**This list is NOT exclusive.

12 years in the oil field, North Africa. Looking for position as Workover/Well services/completion/Well test Supervisor. Arabic/English speaker.

Instrumentation Engineer with over 12 years experience in Calibration, Installation, Loop Checking, Inspection, Commissioning and Maintenance of field instruments ,PLC and SCADA systems. Indian Citizen.

Mechanical engineer with 12 years of experience inside the petroleum industry; specifically as Productivity and Production Optimization Engineer. Primary skills in well productivity, production technology and operations including well completions, well performance, stimulation and well testing

Strong Skills in Reservoir Monitoring & Surveillance coordination though team work integration for Gas & Water Secondary Recovery Projects. Reservoir definition & delineation through well data collection. Development Plans to assure production profiles requirements. Gas & Water Conformance.

To lead a team involved in the drilling activities of a growth oriented oil and gas servicing company.

Now working as Instrument Technician in Kursaniya Gas Plant (KGP) with Consolidated Contractors Company (CCC.WLL) in Kingdom of Saudi Arabia.

Post graduate diploma in PIPING ENGINEERING AND TECHNOLOGY from Elixir institute of piping engineering and technology

Instumentation Engineer with 4 year of experiance in oil ,gas and power industry in EPC project.

Strong fundamentals and Design aspects of Mass transfer and Heat transfer operations & equipment involved in petroleum refining and Natural gas processing plants .Knowledge of HYSYS ,Hextran and HTRI softwares,for rating and design.

GIS,Automated Mapping and Drafting; Mastering GIS principles and techniques

Bachelor of Petroleum Engineer Degree + Computer Office Programs + Autocad + work at drilling company as project engineer + Arabic & English languages + Driving License

Petroleum Engineer - 5 yrs -> Holding Bachelor of Science in Oil and Gas Engineering

Seeking assignments in Quality/Welding Inspection & Control for Piping, Pressure Vessel, Skid assembly, Pipeline, Plant Construction and project execution with a reputed organisation

I have gained five years of experience in the oil and gas industry with Woodside Energy Ltd in Australia, with expertise in subsea, completions, well services and production operations. I graduated with a Bachelor of Engineering (mechanical) with honours from the University of Tasmania in 2001.

INtools / SPI, Infomaker, control system, DCS, PLC, INtools Administration for Large Project.

Alexandru Ioan Cuza University of Iasi, Geology, specialty Geochemistry,

Fresher with M.Tech in Petroleum Technology and B.tech in Chemical Technology, willing to work in any part of the world.

Operations and Engineering Manager with 19 years experience with an oil major. Work experience in Middle East, Azerbaijan and UK. Process engineering background with chartered status.

Piping Engineer with over 4 years of EPC Experience

B.Tech in Pertrochemical Technology having 4.5+yrs of experience strong knowledge in Hysis Both steady state and dynamics

Combined experience in design and construction

B.E, (Mechanical Engineering),April 1994, University of Madras. Diploma in Computer Applications. 14 Years in Oil / Gas fields - SR.PRODUCTION OPERATOR

10 years of experience in oil and gas industry. Experience in mud logging and working on service rigs. Extensive experience in planning and executing well completions, drill stem tests(Open hole and cased hole), rig and rigless intervention; Artificial lift; budgeting, tendering and evaluation

Senior PDS and/or PDMS Structural Designer. Experience in all aspects of design; from conception of design (FEED), layout work to detail design in the Oil and Gas (onshore/ offshore), Refinery/Petrochemical plus Power Generation industries for EPC&M companies in Europe, Asia and Australia

Senior Cased Hole Wireline Engineer

Currently working with M.S. Al-Suwaidi Industrial Services Co. Ltd. as Project/Mechanical Engineer for the construction of HDPE Plant owned by Yanbu National Petrochemical Company, Yanbu Al-Bahr, Kingdom of Saudi Arabia

Chemcial Engineer With +12 Years experince

Have more than fifteen (15) years of professional associations with ENAR Petrotech Services (Private) Limited (EPSL) and gained experience in the Project Management and Detailed Engineering Design.

Deepwater Completion engineer

Production Technology, Completion Engineering, Well Testing, Nodal Analysis, Flow Modelling & Production Optimization

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 [ 49 ] 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out