Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #4302 next resume »»
CONTACT INFORMATION:
View contact information...

EMPLOYMENT OBJECTIVE: Environmental Engineer

EDUCATION
Ph.D., The Pennsylvania State University, May 2002, Geo-Environmental Engineering. Hydrothermal Transformation and Dissolution Kinetics of Hydroceramic Waste Forms for the Idaho National Engineering and Environmental Laboratory (INEEL) Calcined High-Level Nuclear Waste.

M.S., The Pennsylvania State University, May 2002, Materials with Engineering Option. Spectroscopic Studies of ZnO.

M.S., The State University of New York (SUNY) at Stony Brook, May 1994, Hydrogeology. Hydraulic Conductivity, Porosity and Particle Size Distribution of Core Samples from the Upper Glacial Aquifer: Laboratory Observations.

B.S., The State University of New York (SUNY) at Stony Brook, May 1992, Geology major.

RESEARCH AND TEACHING EXPERIENCE:
1994-present: The Pennsylvania State University
* Postdoctoral Research Fellow. Petroleum and Natural Gas Engineering/Energy Institute, The Pennsylvania State University: Production enhancement and environmental remediation using sonication technology.
* MATLAB for computational, graphical and signal processing Toolbox
* Origin data analysis and graphing software
* Hydrothermal synthesis and characterization of hydroceramic waste forms for calcined and sodium-bearing INEEL high-level nuclear wastes
* Comparison of the Vapor Hydration Tests of hydroceramic waste forms and the Environmental Assessment (EA) benchmark glass to determine their chemical durability (leachability) in an unsaturated zone
* Optimization of gibbsite yield via conventional processing and microwave hydrothermal synthesis
* Microwave and conventional hydrothermal synthesis of layered-anionic (hydrotalcite) clay to be explored as slow-release nitrate fertilizers
* Solid-state synthesis of ZnO phosphors doped with different cations (Ce, Pr, Al, Cu, Mn, Tb, Li, Eu and Ga) at 900oC. Measurement of characteristic emission bands provides the data needed to identify potential candidate materials for low-voltage flat panel display devices.
* Characterization of the luminescence of ZnO powders and single crystal from room temperature to liquid nitrogen temperature
* Experience with characterization techniques: ICP, AAS, XRD, FTIR, TG, GC/MS, Raman, UV-VIS-NIR and diffuse reflectance spectroscopies; surface-area adsorption (BET); SEM; microhardness
* Thermochemical modeling using ChemSage software
* Glass chemistry
* Materials Research Laboratory Graduate/Post doc committee chair
* Research Assistant in various research projects
* Teaching Assistant in Physical Geology, Pollution control in Mining Industry, and Aqueous/Mineral Processing

1988-1994 SUNY at Stony Brook
* Investigation of hydraulic conductivity, porosity and particle size distribution of core samples from the Upper Glacial Aquifer: Laboratory Observations (MS Thesis)
* Research Assistant in Engineering Geology
* Volunteered Teaching Assistant in Engineering Geology
* Analysis of Long Island water shed chemical data with PHREEQ aqueous geochemical modeling program

HONORS AND ACTIVITIES
* Burghardt Turner Fellowship, SUNY, Stony Brook, 1992-1994
* International Student Orientation Leader, SUNY, Stony Brook, 1994
* Minority Fellowship, The Penn State University, 1994-1998

PUBLICATIONS AND CONFERENCE PRESENTATIONS
Darryl. D. Siemer, Johnson Olanrewaju, Barry Scheetz, N. Krishnamurthy and Michael Grutzeck. Development of Hydroceramic Waste Forms. Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries VI (eds.) D. R. Spearing, G. L. Smith and R. L. Putnam. Ceramic Transactions volume 119, p. 383-390, 2001.
Darryl. D. Siemer, Johnson Olanrewaju, Barry Scheetz, N. Krishnamurthy and Michael Grutzeck. Development of Hydroceramic Waste Forms for INEEL Calcined Waste. Environmental Issues and Waste Management Technologies in the Ceramic and Nuclear Industries VI (eds.) D. R. Spearing, G. L. Smith and R. L. Putnam. Ceramic Transactions volume 119, p. 391-398, 2001.
Bharat L. Newalker, Johnson Olanrewaju, and Sridhar Kormarneni. Microwave-hydrothermal synthesis and characterization of zirconium-substituted SBA-15 mesoporous silica. Journal of Physical Chemistry B, vol. 105, 8356-8360, 2001.
Bharat L. Newalker, Johnson Olanrewaju, and Sridhar Kormarneni. Direct synthesis of titanium-substituted mesoporous SBA-15 Molecular sieve under microwave-hydrothermal conditions. Chemistry of Materials, vol. 13, 552-557, 2001.
Olanrewaju Johnson, Newalker, N. J., Mancino, C., and Komarneni, S. Simplified Synthesis of nitrate form of layered double hydroxide: A potential candidate for slow-release fertilizer. Materials Letters, vol. 45, 307-310, 2000.
Olanrewaju Johnson, Scheetz. B. E., Grutzeck, M. W., and Siemer, D. D. Hydroceramic Waste Forms: An alternate to Glass for sodium-bearing waste (SBW). ACS National Conference August 26-30, 2001 Chicago, IL.
Johnson Olanrewaju and Teng-fong Wong. Hydraulic conductivity, porosity, and particle size distribution of the Upper Glacial Aquifer: Laboratory Observations. Long Island Geologist, "Geology of Long Island and Metropolitan New York" p. 73-79, Saturday April 23, 1994.
Olanrewaju Johnson, Scheetz. B. E., Grutzeck, M. W., and Siemer, D. D. Comparison of Vapor Hydration Tests of hydroceramic waste forms and Environmental Assessment (EA) benchmark glass at 200oC (in preparation for Journal of Nuclear Materials).
Olanrewaju Johnson, Scheetz. B. E., Grutzeck, M. W., and Siemer, D. D. Hydration kinetics of hydroceramic waste forms (in preparation for Nuclear Technology Journal).

PROFESSIONAL ASSOCIATIONS
* American Chemical Society
Division of Environmental Chemistry; and
Division of Petroleum Chemistry
* Mineralogical Society of American

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1051 to 1100 of 7051)Go to Search Parameters...
Brief Description
Many years of work and academic experinces with the AutoCAD software and some classes in the ESRI -GIS software.
NAME:JOHN GOODDY
Master Electrician \ Instrument Tech \ PLC Programmer
Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.
MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations
Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.
I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level
Static Equipment Mechanical Engineer
Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.
A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.
Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.
Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.
Full hands-on maintenance, Working under extreme conditions
M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission
Linux/Storage Admin
Piping detail design isometric MTO and layout detailng etc
Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation
Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators
Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).
I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.
Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.
Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India
Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.
SENIOR PIPING / MECANICAL DESIGNER
Geotechnical Field Rep
•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.
A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor
I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.
Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.
Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.
NAval architect
Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),
QA/QC Inspection Engineer
I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.
A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.
Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.
Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have
Reservoir or Production Engineer
Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry
Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.
Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).
Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.
Static equipment like vessel, tank and heat exchanger
BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.
corrosion and cathodic protection
Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,
Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job
See resume body
Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement
Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   [ 22 ]   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com