Resume - Instrumentation Engineer with 15 years of experience in maintenance, teaching an...

Misco Jobs

Resume #43097

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Practical applications of knowledge concerning: the fields of analog electronics, digital electronics, field instrumentation, DCS systems and control system implementation with the intention of further improving these fields with constant education. To be team player in motivated team where to attribute with skills and education.

EDUCATION
Degree: Bachelor of Science, B. Sc. of Electrotehnic, Electrotechnical faculty of Zagreb, University of Zagreb, obtained at 1991.
Direction: radio communications and professional electronic. Degree thesis: Developing the device for achieving three-dimensional acoustic ambient with application of analog and digital electronics.

WORK EXPERIENCE
October/2005 - Present - Petrofac Facilities Management Ltd. / Kuwait Oil Company (KOC)
Position: Contr/Instr Specialist

Employed as Contr/Instr Specialist for Kuwait Oil Company (KOC), North Kuwait area. Responsible for curative and preventive maintenance of Gathering Centers, GC-15, GC-23, GC-25 as well Salt Water Treatment Plant (SWTP) and Central Injection Facility (CIPF) with variety of instrumentation equipment.

April/2000-September/2005 - COMERINT S.p.a. - AGIPKCO Atyrau / KARACHAGANAK INTEGRATED OPERATION Aksai
Position: Instrumentation Training Instructor

Employed by Comerint S.p.a. Roma as Training instructor in Aksai, Kazakhstan - KARACHAGANAK INTEGRATED OPERATIONS (KIO) and recently Atyrau - AGIPKCO. Responsible for education and training of domestic staff concerning theoretical and practical part of training performed in classroom and on the site, in order to achieve recommended skill level of the local personnel. Responsible for: organization and performance of training tasks. Goal of the project: to educate domestic staff to achieve level to be able to perform daily curative maintenance on selfsame basis, mainly with modern electronic and pneumatic instrumentation equipment.

March/1999-March/2000 - FFPP Petroleo L.d.a.
Position: Instrumentation Supervisor

Employed by FFPP Petroleo Lda as Instrumentation Supervisor. Responsible for curative and preventive maintenance on storage tanker FPSO Firenze concerning: main deck process and engine room instrumentation. Variety pneumatic and electronic instrumentation equipment knowledge required due to first original installations that are still in use after conversion, especially in engine room. Work with Silvertech GE FANUC PLC where was involved in troubleshooting process control fail to function normally and diagnostic of the software unusual behavior. Results are improving of the complete system and stabilizing process run. Work with CROWCON toxic and combustible gas detecting system due to improper initial installation. Resulted in stabile system operation.

March/1998-March/1999- BP-AMOCO
Position: Instrumentation Engineer

Employed by BP-AMOCO as Instrumentation Engineer. Coordinating and solving the existing maintenance problems on the storage tanker FPSO-"NAN HAI SHENG LI" regarding field (electronic and pneumatic) and control room instrumentation including: troubleshooting crop up problems, specifying instrumentation, design and implementation new loops (logic and control) under requirements of the process staff. Involved in work with wide specimens of the instrumentation including Programmable Logic Controllers (PLC's) MODICON-MODSOFT and SIEMENS-SIMATIC. In addition, responsible for education and training of the national staff (needed strong communications skills) due to goal of the project: nationalization of the oilfield.

March/1996-March/1998-NIGERIAN NATIONAL PETROCHEMICAL COMPANY
Position: Instrumentation Superintendent

Responsible for all activities concerning maintenance of the field instrumentation equipment on Utility&Offsites plants for EPCL - part of Nigerian National Petrochemical Company. Employed as Technical Backup Support for domestic staff trough SNAMPROGETTI S.p.a. Geneve and COMERINT S.p.a Rome. Responsible for the curative maintenance, troubleshooting of the problems, specification of the plant spare parts list requirements, professional help and as well as education and training of domestic staff. Worked with the wide spectrum of instrumentation and control systems (PLC's and DCS) with particular experience with the YOKOGAWA instruments.

August/1993-March/1996 - DINA/DOW VCM/EDC PLANT
Position: Instrumentation Engineer

Coordinating and solving the existing problems in the petrochemical industry, DINA-DOW petrochemical VCM/EDC plant, regarding: field instruments (FOXBORO, ROSEMOUNT, HERAEUS, KHRONE, ENDRESS & HAUSER instruments etc.), control system for process supervision and operating (TAYLOR MOD III), blockade-alarm system (HIMA, DYMAC, ROCHESTER), temperature scanner (PRAXIS, CAMILLE BAUER). Resulting in the improvement of existing and forming new control loops based on the process requirements.
Involved in activities concerned with ISO-9001 QUALITY CERTIFICATE for VCM/EDC plant.

August/1991-August/1993-DINA/DOW PETROCHEMICAL COMPLEX
Position: Maintenance Engineer

Maintained and developed radio communications for the industrial area with "MOTOROLA" equipment. Resulting in the improvement of radio link for urgent message sending.
Supervised the analytical instruments located in plants of laboratories as IR-analyzers (PHILIPS, PYE UNICAM, KRATOS, BECKMAN analyzers) and gas detectors.

ADDITIONAL KNOWLEDGE
- Petrochemical plants experience due to work on the petrochemical sites and complexes (VCM/EDC petrochemical plant, EPCL petrochemical complex and storage tanker with desalinization and first refining process). Trained for work in safety conditions concerning safety procedures under DOW / BP-AMOCO / AGIP / BRITISH GAS standards.
- Familiar with work on PC equipment, Windows XP, Windows 2000/NT environment.

INTERNATIONAL CERTIFICATES
- Ex-proof equipment problematic for hazardous areas.
- Helicopter underwater escape course
- Combined firefighting and survival course
- Coxswain course
- Man overboard (MOB) speedboat course
- Advanced first aid course

LANGUAGE KNOWLEDGE
English - fluently
Russian - very good
Croatian - mother language

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 7050)

Go to Search Parameters...

Brief Description

HND , ELECTRICAL/ ELECTRONICS ENGINEERING (Power and Machine Option)

I finish my contract in South Africa as Safety Advisor on “Polaris” Barge (Acergy) for his dry dock. I obtained my master's degree (Engineering and Chemical safety) in 2003. My career really started In 2005 in the off-shore, on the drillship “Pride Angola” where I sailed for 3 years.

I am an instrumentation and automation engineer with over 5 years experience in oil&gas, refinery and petrochemical fields, covering detail design and site installation/ precommissioning/ commissioning activities.

B-Tech in mech with 7.5 years of experience in plant design arena

Eletrical enginer for 8 yrs experince as chief enginer

Civil Structural Engineer

I have near eight years experience in field of piping design of refinery, oil and gas with position as piping lead engineer & assistant manager, furthermore I am fluent PDS, PDMS, Smart Plant Review, Plant Design Review, AutoCad, Microstation, Microsoft office, etc.

weldin inspection

Having a Diploma in Mech. Engg. with 18 years of Experience in Designer

Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.

I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.

Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring

Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

A well rounded drilling personnel with a unique experience in drilling and completion / work over operations

Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.

Quantity Surveyor/Estimator (Mechanical)

All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.

Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction

Primavera , MS Project

A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.

Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.

i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.

I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.

ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.

I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures

Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.

7 years experience in Mechanical maintenance

- Good at English and drilling software.

16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).

GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS

Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.

Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).

An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.

HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date

Oil and gas mechanical technician

I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.

Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.

See resume

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out