Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #44023 next resume »»
CONTACT INFORMATION:
View contact information...

BRIEF DESCRIPTION:
* Having 15.5 years of work experience in the field of instrumentation from Project execution to maintenance such as inspection, construction, commissioning of field instruments, DCS (Yokogawa's Centum-XL, Foxboro's Intelligent Automation), PLC, single loop controllers, smart transmitters, control valves, etc., spare parts maintainability, day to day maintenance and in Plant maintenance (PM) module of SAP R/3.
* Work experience in construction, commissioning, maintenance and modification activities of instrumentation system in Refinery & Petrochemical industries.

EDUCATION:
* B.Tech. (Instrumentation Engineering) - Passed out in May 1991 with First Class.
* B.Sc. (Physics) - Passed out in April 1988 with First Class.

Company Name/ Designation/ Period
1) Kuwait National Petroleum Co., Kuwait, Instrumentation Engineer (July 2006 to till date)
2) Al-Jubail Petrochemical Co., Jubail, Saudi Arabia Instrumentation Engineer 3.75 Years (September 2002 to June 2006)
3) Reliance Petroleum Limited (Refinery), Jamnagar, India Deputy Manager (Instruments) 4.5 Years (March 1998 to September 2002)
4) Manali Petrochemical Limited, Chennai, India Deputy Manager (Instruments) 6.5 Years (August 1991 to March 1998)

TOTAL YEARS OF EXPERIENCE: 15.5 years

Technical:
Having hands on experience with the following instrumentation system:
* Distributed Control System (DCS)- Centum-XL of Yokogawa, Intelligent Automation of Foxboro
* Programmable Logic Controller (PLC) - 984B of Modicon Gould, PLC -4, SLC 500- 5/4 of Allen Bradley
* Emergency Shutdown System (ESD) - Triconex
* Fire & Gas System - Warmold, consists of smoke detectors (optical & Ionization), flame detectors, linear heat detectors, manual call point, hydrogen gas detectors, combustible gas detectors, FM 200 extinguishing gas systems, Deluge valve operating system
* Electronic controllers - Yokogawa, Contrec and Foxboro 960 series
* Tank level gauge system - SAAB Radar Tank gauging system, Enraf Noniyus
* Turbine meters - FMC Smith, Hoffers
* Analysers like Gas Chromatograph of Combustion Engg.,pH analyser of Polymetron, oxygen analyser of Rosemount, Teledyne, Density meter of Peek.
* Motor operated valve (Rotork)
* Process Switches like pressure, temperature, level limit switches (Magnetrol, Donfoss, Switzer, Yamatake honeywell)
* Load cell based weighment in weigh bridges, blending vessels of Philips
* Field electronic/smart transmitters - Fisher Rosemount, Foxboro, Masonelian, Hartmann & Braun
* Control valves – Fisher, Neles Jamesbury, Masonelian, IL-Yamatake Honeywell, Keystone
* Steam Turbine Governor System – TRISEN - TS110
* Mass Flow meters of Micromotion and Exac
* SAP R/3 in Plant maintenance module – Maintenance system software tool

DETAILS OF EXPERIENCE:
1) From July 2006 to till date:
Joined Kuwait National Petroleum Company, Kuwait as an Instrumentation Engineer in the Project Department.

Presently, I am working for MOIP – Phase I (Modernization of Obsolete Instrumentation Project). This project deals with up-gradation of instrumentation system.

The job includes:
* Review of engineering documents submitted by EPC contractor and vendor.
* Review of P&ID and data sheets
* Review of hook up drawings
* Development of functional design specification (FDS) for DCS/ESD
* Up-gradation of the following instrumentation/control system:
- RS3 DCS to Delta-V system (Emerson control system)
- Relay logics to TMR/QMR based ESD system
- All field instrumentation to smart instrumentation
- Installation of flow metering system and flow computers with DCS interface.
- Manual tank gauges to replace by radar tank gauging(RTG) system
- MOVs and its master station connectivity to DCS and ESD system

2) From September 2002 to June 2006:
Joined AL-JUBAIL PETROCHEMICAL COMPANY (KEMYA), Jubail Industrial City, Saudi Arabia as an Instrumentation Engineer. Kemya is manufacturing LLDPE, LDPE and Ethylene / Propylene through Olefin Cracker plant.

I worked as an Instrumentation Engineer in the Maintenance Dept. for LLDPE & Olefin Cracker plant.
- Worked in the Turn-around (T/A 2006) for cracker plant, LLDPE, LDPE & Utilities.
- Worked in KEMYA's Fanar Project (SAP) phase II. This FANAR project deals with making database such as Bill of Materials, task listing, classification activities, etc for SAP Plant Maintenance Module. Worked for Olefin cracker plant.

Responsibilities:
* To carry out day to day, weekly, preventive maintenance and emergency shutdown planning job, arranging materials, spare parts maintainability, co-ordination with other maintenance dept. to execute the instrument related jobs & provide support to carry out other dept. maintenance jobs, preparing SMPs for instrumentation.
* To implement the plant change request (PCRs) or design change request (DCRs) - modifications arise in the existing instrumentation system for LLDPE, LDPE, Olefin cracker and Offsites plant at KEMYA site. The job involves review of design specification, bill of materials, raising purchase request for materials, installation and commissioning of the instrumentation system and update the records.
* Jobs were carried out in Plant maintenance module in SAP.

3) From March 1998 to September 2002:
Joined M/s Reliance Petroleum Ltd. (Refinery), Jamnagar, Gujarat, India as Deputy Manager (Instruments) in the year March 1998. This is the world largest grass root refinery, promoted by M/s Reliance Industries Ltd.
- Worked in the total instrumentation activities such as erection, inspection, logic development, review of P&ID, checking of data sheet with P&ID, providing hookup drawing for field instruments, supported in developing function design specification (FDS), construction activities, listing pre-commissioning activities, attending PSSR (Pre-start-up safety review) and commissioning of
- DCS – Foxboro, ESD – Triconex, SLC 500 – Allen Bradley
- Fire & Gas system – Warmold, Deluge operating system
- Radar tank gauges – SAAB, MOVs - Rotork
- Mass flow meters – Fisher Rosemount, Turbine meters - Hoffers
- LPG unloading system blower – Roots, Batch controllers – Contrec
- Package skids like Blue Die Injection, Benzene Vapour Recovery System, Mercaptan for LPG and other field instruments
- Logic and functional check, attended DCS SAT (site acceptance test)
- Supported Tankfarm expansion engineering like assigning I/Os in DCS/PLC, identifying spares in field junction boxes, proposing cables/JBs for different applications as per area classification, selection of transmitters, gauges, etc., re-ranging of instruments (in field & DCS) as per process requirement, etc., construction activities (LPG, Gasoline, Diesel, Kerosene, JetA1, Naptha, Benzene) and commissioned instrumentation system. The job involves configuration of all instruments in DCS (Intelligent Automation of Foxboro) like from field instruments to CP40FT through FBMs, mapping of third party device like Xcell communication for pump-start/stop/interlocks, MOVs open/close/alarm indication through Pakscan, ATGs (Automatic Tank Gauging system of SAAB) to MGs, Emergency Shutdown interlock in PLC (Triconex).
- Worked in the interfacing of data like mass flow, valve feedbacks, F&G output to & from GAIL (Gas Authority of India – LPG pumping station-stationed at Reliance Petroleum Ltd., Jamnagar, India) as per company's guidelines.

Responsibilities:
* Worked as a Lead Engineer - Instruments.
* Attended day-to-day maintenance problems, executed modification jobs in the existing instrumentation system (in DCS- Intelligent Automation of Foxboro), spares planning and maintaining, attending production meeting, budget planning, conducting tool box talks, execution of breakdown maintenance and preventive maintenance, providing technical assistance to construction dept. & minor project cell for modification arose in the plant based on plant change request (PCR) or plant change order (PCO), trouble shooting of interlock in DCS, PLC, controllers, F&G systems with ESD system & HVAC, other field instruments.
* Ensures the performance of the contractor job as per standard & clearing contractor's invoices upon job completion and satisfaction.
* Making reports on failures and implement the corrective action upon analysis.
* Check lists were made for daily and periodical checks on the instrumentation system depends upon the failure rate and criticality.
* Reviewing spare parts periodically, advices stock level upon requirement using SPIR (Spare parts inter-changeability record) format, suggesting alternative instruments by identifying suitable spares to minimize the inventory cost. Accordingly, PR (Purchase Request) was raised.
* Work experience in SAP R/3 for day-to-day maintenance activities in Plant Maintenance module.

4) From August 1991 to March 1998:
Joined M/s Manali Petrochemical Ltd., Manali, Chennai (SPIC group of organization), India as an Engineer trainee in the year August 1991, had been promoted to Deputy Manager (Instruments) in the maintenance dept., manufacturing Propylene glycol, Propylene oxide, Propylene glycol mono methyl ether (PGMME) and Polyols.
- Worked in the erection and commissioning of PGMME plants such as installation, calibration and loop checking of field instruments and assigning loops, generation of graphics, sequence logic etc in DCS(Centum-XL of Yokogawa), Trip interlock system in PLC (984-B of Modicon Gould)
- Some of the DCS I/Os & field instruments used initially for Di-Chloro propane (DCP) were re-vamped and modified to suit for PGMME plant loops. The job involves identifying I/Os & field instruments, up-dating instruments loop diagram, data sheets, identifying material take-off, providing hook up drawings, modification in instruments tubing, re-routing of cables to the assigned junction boxes, loop checking, re-ranging of transmitters & DCS face tag and executed functional test.

Responsibilities:
* Worked as a Shift-in-charge –Instruments, carried out the jobs and trouble shoot the problems arose during the shift for all the plants.
* Troubleshoot the logic and interlock problems in DCS/PLC for batch process – Polyol plant & other continuous process plants as required by the operation
* Taking back up of DCS control stations and engineering stations periodically as per vendor recommendations.
* Participated in designing, planning & implementation of new installation & modification in the field instruments as well in DCS graphics, sequence table (for interlocks), alarm indication, etc. as per the guidance of plant technical services and update the documents & procedures as per changes made.
* Attended maintenance problems, spares maintaining, executed preventive maintenance jobs and modification jobs in the existing instrumentation system.
* Reviewed the shutdown job lists and scheduled the jobs as per process clearance & manpower availability and identify the process interlock during start up to have a smooth start up of the plant.
* Commissioned Propylene bullets and its utilities at Propylene Importation Terminal at Cuddalore, Tamil Nadu, India.
* Worked in the generation, implementation and up-keeping of the instrumentation systems as per ISO 9001 awarded by M/s Det Norske Veritas Industry B.V., The Netherlands.

TRAINING:
1) Attended training in Engineering and Maintenance function of Yokogawa's DCS, Centum-XL at M/s Yokogawa Electric Asia Pte. Ltd., Singapore.
2) Attended vendor training of Foxboro's DCS-Intelligent Automation in configuration and basic maintenance in the system conducted at M/s Reliance Petroleum Ltd., India
3) Attended vendor training of Allen Bradley training in PLC5 series conducted at M/s Reliance Petroleum Ltd., India
4) Attended SAP training in order processing, preventive maintenance of Plant Maintenance module conducted by SABIC training center, Kingdom of Saudi Arabia.

COMPUTER KNOWLEDGE:
MS-Offices, SAP, Intools(Read only)

LANGUAGES KNOWN: Sourashtra, Tamil, English, Hindi

View contact information...
«« previous resume next resume »»
Search Results (Resumes 851 to 900 of 7040)Go to Search Parameters...
Brief Description
To pursue a career in the field of Piping Designer (Cadworx-3d modeling) with an emphasis on basic and Detailed Engineering.
Experience/Knowledge in: Classification Survey Statutory Survey Ship Operation/Management/Audit Shipbuilding Ship Repair/Modification Ship Design (Computer Aided-2D & 3D, Structural & Mechanical) Quality/Safety Management & Certification International Standards Project Management Teaching/Training
Intelligent pigging engineer - 13 years of oil and gas experience - Worldwide
20 Years Total Experience In Drilling As Drilling Engineer/ Drilling Supervisor/Well Planning, Well Control, IWCF Supervisor Passed
Drilling, Completion, Fluids Engineering, Directional Drlg Supervisor/Consultant
I am a geologist/geophysicist that offers 25+ years of exploration, development, management, and acquisition experience. My track record is excellent and I have a mastery of a variety of specialized software packages.
20 yrs experience Oil/Gas from Ground Up. Objective supported by: INTERNATIONAL PM MBA Ceng INSTRUMENTATION AND CONTROL HNC PROCESS CONTROL CONSTRUCTION SUPERVISION COMMISSIONING / AUDITING FISCAL MEASUREMENT SYSTEMS ENGLISH / SPANISH
Knowing Reservoir Simulation from inside (numerical modeling and coding) out (running commercial software). Seeking a Reservoir Engineering related position at Houston, TX to utilize my diversified engineering and business experience and 7 years of education in Petroleum Engineering.
A highly experienced operations geologist(12 years)based in UK with varied international experience in exploration(11 years)and development geology(7 years). Seeks a supervisory or team position in operations geology worldwide. Expertise includes deep water and high pressure wells.
TO HELP WITH MY EXPERIENCE,KNOWLEDGE LIKE SPECIALIST IN ARTIFICIAL LIFTING OIL PRODUCTION AND ENVIRONMENT, QUALITY OF ADMINISTRATION, SECURITY AND OCCUPATIONAL HEALTH Applying the knowledge acquired in the Masters of Management of Company and The Master of Finances and Business.
Petroleum Geologist with background in Exploration/Development/ Operations/ Wellsite geology with Major and independent operator. G&G interpretation using GeoQuest workstation: IESX, CPS-3, Wellpicks, Wellcomposite. Geological support to expl./Deve./Horizontal well drilling.
Having a strong background in Geology and three & a half years of International Oil Field experience, I wish to join a reputed company within the Oil Industry and build a career as a Geologist, Petrophysicist (Log Analyst) or Seismic Interpreter.
Xiao Ming Jiang A senior civil/structural engineer with experience in power station, SCR and FGD project design and project management.
A position in electrical maintenance.
Oil finder with 21 years experience in US and international exploration and production geology and geophysics.
Explosion Development Geologist, 23 years international Oil & gas experience. Also production geology well location assessment studies and well trajectory planning for highly deviated and horizontal wells. Experience in Landmark and GeoQuest ares, Unix knowledge and excellent PC skills.
BS and MS in Geology and 23 years of global industry experience with majors. Strengths include communication and interpersonal skills, and working in multi-disciplinary teams, horizontal well planning and geo-steering, production optimization, open and cased hole logs, computer mapping.
ENGINEER WITH 25 YEARS EXP. AS DRILLING ENG. DRLG SUPERINTENDANT LOOKING FOR A SUPERVISOR OR ENGINEER position. Looking for work in Okla..Tx.,Wym.,La.
Excellent human relations skills. Computer proficient with MS Office, Database and windows. Superior ability to achieve immediate and long – term goals. Ability to execute a number of projects simultaneously. Proven ability to analyze, plan, manage and motivate.
CORE COMPETENCE Rock Eval, Vitrinite Reflectance, GC, GCMS and other analytical techniques. Drilling Fluid. Database applications. Writing codes in VB6, C, and VBA. Management concepts in Human resource Planning.
I worked on structural geology, stratigraphy & development/exploration geology. I worked on exploration leads, evaluated plays, performed economic analysis of prospects. I was involved in discovery of 12 billion STB heavy oil and 10 billion STB light oil in Kuwait.
A petroleum engineer by profession and a graduate of Colorado School of Mines with worldwide experience of over 25 years in reservoir and petroleum engineering. Versatile and multilingual. Available to work on single status on contractual terms or permanent.
A senior engineer with over 20 years experience seeks a permanent challenging and fulfilling role within the oil, gas or petrochemical industry in the US.
Highly motivated, resourceful and results-oriented professional with American and International experience in environmental projects, drilling and the exploration of oil fields, gas and mineral deposits.
Petroleum Engineer with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology and application of new technology for onshore/offshore rigs and office operations in Drilling, Completions, Testing and Workover of vertical, directional, multilateral and hor
Drilling fluids engineer. 17 years experience in drilling and drilling fluids, Familiar with all mud systems, tendering, mud programs and waste management. Sales engineer. Computer literate.
Lead Piping Engineer, Procurement Engineer, Engineering Coordinator, Pipe Stress Analysis
I have 12 years of experince in Instrumntation engineering. I have worked in oil and gas fields, Engineering consultancy, Power plant and etc.
Project Mechanical-Piping Engineer
An engineer technical assistant with progressive experience, working in Environment and Reclamation, Production and Operations, as well as Drilling departments.
Manager (Production and Reservoir engineering, subsurface studies)
Motor Rewind Techinician
Education/ University/Year : Bachelor of Engineer in Mechanical Engineering (B.E.,) / University of Madras-1994 Professional Qualifications: ASNT Level II in UT, RT, MPT & PT Training Undergone: H2S and B.A training at, Qatar petroleum, HUET (Helicopter under water escape training) at Ventur
15 years autocad experience, off shore platform design, mechanical design, machinery design, civil drawing experience, Senior Designer, Group Lead.
Maintenance Planner/Schedule with 17+ years of work experience out of which 14+ years in Oil&Gas, Petrochemical, Refinery and Fertilizer Industry Maintenance and Maintenance Planning activities. Good working knowledge of Planning&Scheduling, Reporting, SAP-PM, Primavera 6.1 etc.
Available 2nd Engineer -UK CoC Unlimited ,Offshore DP Vessel
I am a successful, experienced and qualified Commissioning Start up Specialist Engineer, Commissioning Engineer, Production Supt-Supervisor, Shutdown Coordinator with over 18 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.
Petroleum engineer,involve in drilling activity and post exploration - exploitation. willing to work any place in the world (no exception), ready to start working asap.
2D/3D seismic interpretation for structural and stratigraphic plays in the areas of both compressional and extensional tectonics, seismic attributes on 3D volume, AVO modelling and integration of acoustic impedance inversion.
Experienced Mechanical Technician,well verse vibration and industrial equipment balancing ,knows o/h of all types of pumps and compressors.
Electrical Engineer, Engineering.Construction and commissioning of offshore oil & gas facilities
Electrical Engineer with over 13 years diverse experience in managing medium scale of new & revamp projects. Proficient in design reviews, electrical equipment selection, installation & construction, monitoring, commissioning, testing and maintenance of electrical equipment.
Petroleum engineer with more than 8 year experience as System analyst, familliar with Oil/Gas production system (Scada, Historian) and SAP R/3
Senior Structural Engineer with 13 years experience - Offshore with SACS & StruCAD*3D, Onshore (refinery) with STAAD.Pro
SCADA and Automation and I&C Engineer
Mechanical Engineer with18 years experience to projects/plant maintenance (rotating/static equipment)in Oil & Gas-7 years, chemical/petrochemical-8 years and food process-utilities maint.-3 years.
I am an Instrumentation Engineer, having 15.5 years of experience in the field of instrumentation from Project execution to maintenance in Refinery and Petrochemical Industries. Having work experience in SAP R/3 plant maintenance module (PM) to carry out day to day maintenance.
I have 15 years experience in Oil and Gas Industries as Electrical Maintenance supervisor, 5 years an Electrical Commissioning Supervisor, 5 years in Electrical construction and hook up and 5 years at the Electrical Workshop.
11+ years experience (10 years with Landmark, 1+ years with Schlumberger) as G&G consultant worked on OpenWorks, GeoFrame, Petrel suite of applications. Currently working with Schlumberger helping clients in Petrel and GeoFrame workflows, presenting new features & updates, Petrel Testing & Training
Experienced in gas lift design, well optimization, nodal analysis, well integrity, surveillance techniques, trouble shooting, water shut-off, formation damage evaluation and treatment, interpretation of production logging , PVT & multiphase flow, water injection project, and witness rigless operati
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   [ 18 ]   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com