Resume - More than 23 years experience as Sr. rotating techn/foreman in the refinery, res...

Misco Jobs

Resume #44097

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:

Job Description:

Assigned as Maintenance Technician VI (FOREMAN) in the Rotating Equipment of the oil process refinery such as pumps, compressors, blowers, steam turbines and reduction gearboxes: Responsible for routine jobs, installations, alignment, pull-out, troubleshooting, repair, inspection and overhaul of pump (from single stage to multi-stage centrifugal pumps and including reciprocating and rotary type of pump); steam turbine (condensing and non condensing type) to multi stage centrifugal compressor, gear reducer, increaser blowers, induced draft fan, force draft fan, air fin coolers, tank agitators and soot blowers. Also involved in overhauling and resetting of Pressure Safety Valve (PSV), relief valves and in-place popping of boiler safety valves.

Have knowledge in in-place balancing, operates machine tools, like; lathe machine, radial drill press, lapping machine, milling machine, portable and pedestal grinders and vibration analyzer.

Assigned in preventive maintenance works; responsible in monitoring all kinds of rotating equipments.

Assigned as a Heavy Equipment Operator during shutdowns and turnarounds: responsible in all rigging works, pull-out and re-installation of electric motors, pumps, gearboxes, bundles of heat exchangers, air-fin coolers and other lifting jobs to perform.

Assigned at Central Maintenance Department (Onsite) responsible for the repair and inspection of mechanical equipment.

* In his twenty (20) years in the company, he gained four (4) sub-levels and six (6) technician levels, achieved four (4) years perfect attendance, and a member of Fire Protection and Emergency Rescue Team (Team A1); also a Petron Scholar during his college days at Don Bosco Technical College.

JOB OBJECTIVE: ROTATING EQUIPMENT MECHANICAL FOREMAN

WORK EXPERIENCE:
Date Employed: October 3, 2005 to present

Position: Senior Rotating Technician
Grade 11

Company: Sohar Refinery Company LLC.
Sohar, Sultanate of Oman

Date Employed: April 1, 1985 to Sept.19, 2005

Position: Mechanical Maintenance
Technician Level VI (foreman)

Company: Petron Bataan Refinery
Limay, Bataan

EDUCATION & CERTIFICATION:
College: Don Bosco Technical College
(Industrial Technician Center)
Mandaluyong, Metro Manila

Course: Mechanical Technology
Specialization: Machine Tools Maintenance
Year: 1982 – 1985

Secondary: Limay Municipal High School
Limay, Bataan
Year: 1977 – 1981

Elementary: Kitang I Elementary School
Limay, Bataan
Year: 1971 – 1977

TRAININGS AND SEMINARS ATTENDED:
Title Date Place Conducted By

1. Lube & Bearing Maint. March 23,1984 Petron Bataan Refinery Ethyl Asia Pacific Co.
Seminar

2. Productivity Improvement Nov. 25-27, Petron Bataan Refinery PNOC – HRD
Circles (PIC) Leadership 1987
Course

3. Diesel Engine Maint. June 30 to IRTC, Technological IRTC – TUP
And Servicing July 3, 1992 Univ. of the Phil.

4. Gasoline Engine Maint. Sept. 7-11, IRTC, Technological IRTC – TUP
Tune-up and Servicing 1992 Univ. of the Phil.

5. Practical Vibration Under- May 19, 1993 Petron Bataan Refinery UPDATE Int'l. Inc.
standing & Prevention
Techniques for Mechanics, Technicians & other Non-Specialists

6. First Aid Training Nov. 23-25, Petron Bataan Refinery Phil. Nat'l. Red Cross
1993

7. First Aid Training April 12-14, Petron Bataan Refinery Phil. Nat'l. Red Cross
1994

8. ISO 9000 Awardees Jan. 19, 1996 Petron Bataan Refinery Neville - Clark

9. Quality Improvement Tools Aug. 26-28, Petron Bataan Refinery Petron Corporation
& Techniques Workshop 1996

10. Operation & Maintenance Oct. 27-28, 1997 PSI Training Center Cummins Engine Co.
of K-Series Cummins Engine

11. Crane Operation/Rigging Dec. 9-11, Petron Bataan Refinery Mobile Crane Inspection
Operation Safety Seminar 1998 of Asia

12. Rough Terrain Crane Jan. 14, 1999 Petron Bataan Refinery Association of Carriers &
Equipment Lessors, Inc.

13. Analytic Troubleshooting Feb. 20-23, Petron Bataan Refinery Kepner Tregoe Workshop 2001

14. Burgmann Mechl. Seals July 5, 2001 Petron Bataan Refinery Burgmann Phils.

15. Managing Personal Change Nov. 19-21, 2002 Petron Bataan Refinery Ancilla Enterprise Devt. and Personal Effectiveness Consulting Program

16. Achieve Better Results April 10-11, 2003 Petron Bataan Refinery Ancilla Enterprise Devt Everyday Consulting

17. Basic Safety Training May 2-21, 2003 Petron Bataan Refinery Global Safety Services

18. Labor-Management Relations June 30 to Petron Bataan Refinery EC Business Solutions
Seminar July 01, 2003 and Career Center

19. Make PMS Work Better Nov. 10, 2003 Petron Bataan Refinery Ancilla Enterprise Devt.
Consulting

20. Operation and Maintenance Jan. 12-15, 2004 Petron Bataan Refinery Tadano Limited
Training of TR-500EX Mobile Hydraulic Crane

21. Predictive Maintenance/ Feb. 11, 2004 Petron Bataan Refinery SKF BEARING
Vibration Monitoring Course

22. Refinery Safety Orientation April 15-16, 2004 Petron Bataan Refinery Petron Corporation

23. Safety on Mobile Crane July 21-23, 2004 Petron Bataan Refinery First Phil. Skills and
Operation and Rigging Equipment Testing Corp.

24. Rough Terrain Crane July 23, 2004 Petron Bataan Refinery Asstn. Of Carriers and
Operation Equiptment Lessors Inc.

25. Revolutionary Bolting Aug. 9-13, 2004 Petron Bataan Refinery HYTORC Philippines

26. Compressor Basics Oct. 12-13, 2004 Petron Bataan Refinery Hoerbiger

27. Proper Operation and Feb. 17, 2005 Petron Bataan Refinery Atlas Copco (Philippines)
Preventive Maintenance Of Air Compressor Unit

28. Lubrication Seminar May 10, 2005 Petron Bataan Refinery Petron Corporation

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 7054)

Go to Search Parameters...

Brief Description

B.Tech from IITK, 6 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

A Logging Analyst in the Syrian Petroleum Company. A Petrophysicist in Al Furat Petroleum Company, responsible for many fields for all petrophysical operations and formation evaluations. Petrophysics section head, Wireline logging, perforation and core analysis contract holder.

Extensive Wonderware software experience including Industrial Application Server and System Platform products. Expert industrial PC skills. Extensive experience with Microsoft Virtual Server and Terminal Server products.

I have involved in petrochemical, oil/gas, and heavy industrial projects. I have strong academic achievements, excellent interpersonal skills, and positive attitude, Commitment and desire to perform engineering design. I am also exceptionally well organized and highly motivated and able to pull toge

To obtain a challenging position in your organization where my technical and management skills can be effectively honed and utilized and to gain practical experience in the realm of Civil/Structural Engineering.

Over Eight years of multidisciplinary Civil Engineering experience

Instrumentation & Maintenance industrial Engineer

Substation primary design engineer for high voltage substation

DEEE with 4 years Triconex Knowledge

I had passed bachelors degree in safety and fire engineering.Passed NEBOSH international certificate in occupational Safety and health.

I have 13 years in piping design and drafting field for Oil and gas industry

I possess hands on experience in developing EMS (ISO 14001) and OHSMS (OHSAS 18001) procedures in line with International best practices, performing HSE audits, leading EIA and Risk Assessment study teams, assisting in development of emergency response / contingency plans e.t.c,

Vast experience of planning, Management reporting, Refinery Economics,Vast experience in Petroleum Refining. Confident and result-oriented, Able to analyze and apply problem solving and decision-making techniques to achieve desired objectives within target deadlines.

16+ years experience HVAC Engineer with intension to work in Oil and Gas field

Sr. Projejct Document Controller-Exp of 12 years in Oil & Gas/Power Project Industry

Thirteen (13) years of extensive and diversified experience in managing and leading variety of upstream Oil & Gas handling, Chemical & Petrochemical Projects.

About 16 yrs of experience in the field of Civil Engineering Design, Construction & Inspection and Document Control for turn over (Piping Test Packages, Punch list & etc) & dbase management using MS Access program.

Electrical Intrument & Control System

Lead Mechanical Engineer, 17 years of experience in preparation of Specification/ Material Requisition/ Proposal/ Scope of Work; Design Basis and calculations, Technical & Cost Evaluation; Vendor Drawing Review, Static, Rotating and Material Handling Equipment and Mechanical Packages

Senior Piping Designer with 20+ years experience. AutoCAD, AutoPlant, Excel, Access, Word, Outlook.

Wireline supervisor or wireline consultant

Geoscientist with experience of working in a multidisciplinary team in a major E and P company. Experienced in Seismic modelling and Interpretation, and reservoir modelling. Holds an M.Sc in Petroleum Geoscience.

Process Engineer with over 11 years oil and gas engineering background. Design experience of Liquefied Natural Gas import terminals and process simulation experience of base load liquefaction trains.

Structural engineer with over 14 years experience in EPC projects (grass root and revamp) in refineries, petrochemical plants, spinning mill, cement plant & other industrial units.

OBJECTIVE: To utilize my experience in manufacturing and construction. Using various software programs, and engineering disciplines, (24,000hrs) Of AUTOCAD experience.

More than 14 years process & project engineer experience in Oil & Gas and Oil Refinery.

CAREER OBJECTIVE A suitable, challenging, and rewarding position in Petroleum Engineering.

Working Experiences as Senior Process Engineer from 1992 - 2003 in LNG/ LPG Plant of PT. Badak NGL in Bontang East Kalimantan Indonesia. I have been working for PT. Badak NGL over 20 years. Previous Job experienced in PT. Badak as Senior Production Planning Engineer from 1983 - 1991.

ERP Consultant (functional and technical) : MFG-PRO and Progress, Axapta, Movex, SAP Software Development Project Manager : Visual Basic, Oracle, Access, SQL-Server

I have multilingual skills and am fluent at Russian, Turkish and good atdrilling

Proactive and skilled professional with a solid supervisory background and experience developed on projects in Venezuela

Good Capability and ability to get goal the project with safety, quality, planning and costing

Using FEM packages (COSMOS, ALGOR) to analyze structures and components (Stress, Stiffness, Fatigue, etc). Document drafting and review (Calculations, P&IDs, MITPs, etc.).

More than 23 years experience as Sr. rotating techn/foreman in the refinery, responsible for the repair, troubleshooting, modification, preventive and predictive maint. of all rotating equipt.; ensure safety, planning, scheduling of personnels, preparations of tools and spare parts.

Stress Analysis of critical lines connected to static as well as rotating equipments like exchangers, columns, reactors, pumps, compressors. Super high pressure steam lines, lines connected to ‘cold box’ (Cryogenic lines), and expansion loop sizing for rack lines, analysis of pressure safety valves

A highly experienced MBA professional with exceptional interpersonal and communication skills and an external extensive background in the following broad-based competencies: Procurement/Supply Chain Management Strategic Planning; Contract Negotiation; Business Development

Wire line logging: done a special six months course on wire line loggingIn which I Have studied all the logs their specifications, uses, tools, interpretation etc, like gamma ray, sp log sonic log, neutron porosity logResistivity & conductivity log, density &photo electric factor log etc.

Crude oil storage tank construction experience as per API 650/653

i am looking for dimensional survey engineer job. i have complite Diploma in Marine & Offshore Technology.i have been work for Keppel fels Shipyard 3yers. Dyna-Mac shipyard 1.5years. now working for Norce offshore in Indonesia for DLB Projct.

I Mr. Noel C. Atienza 12 almost 12 years experience in oil and gas as a senior mechanical technician, including as a machinery supervisor. I'm permanent residence in singapore

a great job seeker of electrical field

Pipeline Integrity Engineer / Project Engineer / Design Engineer

Technical Assistant to Reservoir/Production/Petroleum Engineering.

BSc Chemical Engineer Having Six Year experience in Petrochemical Industry

Currently working in SNC LAVALIN ENGG INDIA LTD. Mumbai and deputed to SNC LAVALIN EUROPE B.V. BRANCH to Shaybah, saudi arabia as a PDS ADMINISTRATOR. My job profile is related to Piping Engineering and PDS(PLANT DESIGN SOFTWARE),RIS (Relational Interface

Controls and Instrumentation Engineer / ESD-Triconex & DeltaV SIS/ 6+year Exp

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Innovative Professional with 26 years of progressive experience in engineering design, maintenance planning and management, including 16 years in the Oil/Gas industry.

Over 18 years experience in construction, installation and mechanical assemblies, heavy

My background has 15 years of Heavy chemicals, Dyes, Petrochemicals process safety and Refinery Construction HSE experience in India as well as foreign countries Recently acquired NEBOSH Qualification

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out