Resume - I have over 15 years of experience in this field and acquired enough knowledge. ...

Misco Jobs

Resume #44270

CONTACT INFORMATION:
View contact information...

QUALIFICATION
Diploma In Instrumentation Engineering
Total Experience 15 Years
Previously working with Abu Dhabi Company for Onshore Oil Operation (ADCO) as Instrument Control Foreman since 1998.

RESPONSIBILITY & NATURE OF WORK
Day-to-day breakdown Maintenance and Trouble- shooting of Field as well as Control Room Instruments.

Carrying out Routine Maintenance of Daily, (Load Dispatch Centre (LDC) Backup Tape & H2S Open Path Gas Monitoring System) Weekly (Oiling of Turbine flow-meter System, LDC RTU's Inspection). Two weekly (Turbine auxiliary Air compressor system, Rolls Roycee Avon Turbine Fire System) Monthly (Thomassen Gas Turbine Fire System, Kvaerner Gas Turbine Fire System, Detronix Diesel Engine Test, <I> Computers and Printers, Solartron Flow Computers, Turbine and Generator Air Inlet Turbine System) and Three Monthly Maintenance (All Substations Fire System)

Carrying out Six monthly Preventive Maintenance Systems of Chubb Fire System and Sieger Gas System of Turbines, Fuel Gas Skid Supply System of Turbines, LDC (SCADA) System of Control Room.

Carrying out of Yearly Preventive Maintenance System of Rolls Roycee Avon Turbine Field as well as Control Room Instruments, Fuel Gas Skid Supply Systems of Turbine, Fuel Gas Knockout Pot Systems of Turbine, Fuel Gas Heaters, Substations Fire system etc.

Three Yearly Maintenance of all Inter-connector and Line Transformers.
Field Instruments Handled
* Level Transmitters – Masoneilan, Fisher, Magnetrol etc.
* Control Valves – Mosoneilan, Fisher Rosemount, Kent etc.
* Smart Series Transmitters (Pressure, Temperature and Flow) – Rosemount, Foxboro, Honeywell etc.
* Pressure Transmitters - Gulton Statham, Dynisco
* Turbine Flow Meters – Danial
* Switches (Pressure, Temperature, Level) – United Electric, Delta, Dwyer, Magnetrol, etc. Custom control sensors etc.
* Level Indicator – Magnetrol, Klinger etc.
* Vibration switches – Rabortshaw etc.
* Proximity Switches – Maglock, Airpack, etc.
* Solenoid Valves – Asco, Parker Hannifin, R.G. Laurence, Ruggless Klingeman, etc.
* Filter Pressure Regulators – Masoneilan, Fisher, Norgen
Control Room Systems Handled
* Mark II GEC Control Systems for Single and Twin Avon Gas Turbine Generator System.
* Mark V Control System for Frame V make Thomassen single shaft Gas Turbine – Generators.
* Mark V Control System for Frame VI make Kaverner Single shaft Gas Turbine – Generators.
* Chubb Fire and Sieger Gas Protection Systems for Rolls Roycee Avon Gas Turbine Generator Systems.
* Ajax Fire Protection System for Frame V Thommasen Gas Turbine Generators
* World-mate Fire Protection System (Allen – Bradley PLC based SLC – 500).
* Vibration System - 3300 Series Bentley Nevada for Thomassen and Kaverner Gas Turbine Generators.
* Vibration System – Vibrometer for Rolls Roycee Gas Turbine Generators.
* SCADA Systems for Load Dispatch Centre (LDC). (RANGER System – ABB and RTU System – HARRIS).
* Digital Fault Recorder (DFR) System – Hathaway
* Air Compressor System – Ingersoll Rand.
* H2S Open Path Monitoring System – Borel Laser.
* Portable Diesel Generators – Cummins.

SPECIAL ACHIEVEMENTS
* In 2005 after doing the detailed study and preparation of complete drawings replaced the old obsolete 5700 Sieger Gas Detection System with new 5701 Sieger Gas Detection System for the Frame V Gas Turbine Generators.
* In 2004 Provided the Temporary solution of failure Diesel Engine Governor Power Supply which is affecting the Frame VI Turbine Operation in critical condition.
* In 2005 Prepared the complete Spare Part List which has all the details of GE and Manufacturer Part no's, model no's, Tag no's etc. of GE Frame VI Gas Turbine Generators.
* In 2006 Involved the Hazzop Modification & commissioning of Frame V and VI Fuel Gas Skid Supply System (Introducing the new ESD Valves)

WORK EXPERIENCE
Regi Industries – Thane
Worked with above Company from Jan1997 to Jan1998 as an Instrument Supervisor.
Involving maintenance and Commissioning activities of Control Instruments and Systems.

Saudi Armco Riyadh Refinery - Saudi Arabia Worked with the above company for 3½ year from June 1993 to Dec 1996 as an Instrument Technician.

Control Room System Handled
* 7200 / 3300 Bentley – Nevada Vibration Systems for Centrifugal compressors and Westinghouse Turbines.
* Yamatech Honeywell Blend-O-Set Gasoline Blending System.
* Square D Solid State Shutdown TMR System for Compressors.
* Woodward Governor Control System for Westinghouse Turbine - Generators.
* GE Mark I Control System for Hitachi Turbine - Generators.
* ESD systems of Ingersoll- rand air compressors.
* Boiler Control System.
* Incinerator Control System.
Field Instrument Handled
* Pneumatic Controller – Taylor
* Rosemount Transmitter (Pressure, Flow, Temperature).
* I/P and P/I Converter.
* Control Valves – Fisher, Masoneilan.
* Turbine Flow-meters Insertion type – Danial
* Level Transmitters (Displacer type, Capacitance type, D.P.Cell type.
* Vacuum Transmitters.
* Analyzers (Oxygen, Moisture, Hydrogen)
Special Achievements
* In 1994 brought back Gasolene Blending System into Automatic Operation by Repairing Electronic Cards at component level of the Obsolete Yamateck Honeywell Instrument.
* In 1995 Participated in Upgrading Retrofit of Vibration System of Bentley Nevada 7200 analog system to 3300 digital system?
* In 1996 Involved in Trouble shooting of Sequence Controller of Nitrogen plant Revex valve exchanger sequence and provided the Temporary solution in place of PLC Failure to operate the Revex valve exchanger sequence and brought back the Nitrogen production.

Regi Industries –Thane
Worked with above Company from March 1992 to June 1993 as an Instrument Technician.
Installing and Calibrating the Field as well as control room Instruments.

Mid East Construction Company
(Mecon), Qatar
Worked for the above Company for 3 months from Dec 1991 to March 1992 as an Instrument Technician.
Installed and Commissioned the Waste water disposal system
On Onshore location (Halul Island) in this Project installed And Calibrated the Rosemount Pressure and Flow Transmitter and Masoneilan Control Valve. Programmed the Foxboro 761 Single Loop Controller. Shutdown Jobs on Offshore location (PS1)

India Glycols Limited
Worked with the above Company for 1½ years from May 1990 to Dec 1991 as an Assistant Foreman Instrument.
* Handled Taylor Mod 30 Programmable Controllers
* Foxboro 760 / 761 Programmable Controllers.
* Hitachi and Allen-Bradley PLC for Oxygen Plant.
* Yakogawa Centum DCS
* Analyzers (Servomax Oxygen and Lira Ethylene analyzers)
* Rosemount and Masoneilan Field Instruments.
Abhinav Electronics Worked with the above Company for1year from June 1989 to May 1990 as a Service Engineer.
* Assembling, Testing and Installing the Microprocessor based Temperature, Level Indicators and controllers. Specially Designed for Water Dams, Hydro water power turbines.

Bayer India Limited, Thane
Completed 1 year Apprenticeship is in Instrumentation Engineering.
* Calibration and maintenance of all Pneumatic and Electronic Instruments
* Servicing of Analytical and Laboratory Instruments.
* Conveyors belts.
* Siemens PLC – Simatic 110

SALARIES DRAWN Negotiable

ACADEMIC QUALIFICATION
Three year Diploma in "Instrumentation Engineering"
Certificate Course in "Microprocessor hardware and software"
Certificate Course in "Advance Basic Software Language"

TRAININGS
* SPEEDTRONIC Mark V Gas Turbine Controls Maintenance. - March 1999, Kvaerner Energy.
* Optical Fibre Transmission System – May 1999 – Serco
* Heavy Duty Gas Turbine Training Program – June 2001-Thomassen Service Gulf L.L.C
* Planning and organizing July 2002 – Spearhead Training
* Risk Assessment General Awareness – Sep 2002 – Nutec
* Emergency Communication Dec 2003 – National Centre for Management and Training.
* SPEEDTRONIC Mark V (Maintenance) – March 2004 – Caledonian Training Services (U.K.)
* Basic Analogue and Digital Electronics May 2005 – Caledonian Training Services (U.K.)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 6998)

Go to Search Parameters...

Brief Description

BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)

I have over 15 years of experience in this field and acquired enough knowledge. I had handled very challenging assignments. As an Instrument foreman I was fully involved in my business wherein I had to identify potential opportunities and gain wide knowledge.

I have ten years experience in SITEP (ENI partner) and my qualification is Maintenance supervisor

highly motivated exploration geophysicist

Instrument Design Engineer with 4 years of Experience in a world recognized oil and Gas Company JGC-Descon, having experience of Instrument Master Index , JB Wiring, ILD Generation, Main control Panel Wiring, PLC Cabinet Wiring, Main Control Panel Schematics Diagram, HOOKUps, MTO

Structural Cad Detailer, Site Engineer

Co-ordination and inspection of all Quality Control activities like Surveillance of day to day Fabrication, Welding and Erection of Piping and Structural works of Rigs, Co-ordination with clients, Reporting to Project Managers, Coordinating and witnessing of various N.D.T & Destructive testing.

Mechanical Engineer with AWS CWI # 09021281. I have 4.5 years experience in the field of Quality Control and welding inspection in Oil & Gas Projects involving Onshore Pipelines and piping of platforms, Piping of Refineries, process plants. Fabrication of Pressure vessels, Boilers and Heat ex

Heavy diesel mechanic since leaving school 20 years ago

Designer having 10+ years of experience in the Electrical detailed engineering on Power Plant, Oil &Gas (Onshore/Offshore) and Petrochemical projects in both Indian & Global projects.

ACS800,ACS550,ACS600,ACS1000(all ABB),DCS500,DCS800(both ABB),Drive Window, Winder Soft, IGSS7.0, PL7PRO, UNITY XL,FieldBus,HART,BrainTCP/IP,DH+,DNP,MODBUS

With regard to CAD capabilities, I have over 2 years experience in the following software: Microstation PDS EERACEWAY (3D Raceway Modeling) PDS DRAW (Drawing Manager), PDS PDS-EQUIP (3D Equipment Modeling), Microstation Java 7.1, Orthogen/PDS, AutoCad

Sr. Piping Design Engineer

Experienced instrumentation technician able to handle loop-check, termination, calibration of field instruments and devices

Cathodic Protetion Design,ECDA Survey,Soil Resisitivity

A result oriented professional with proven abilities in plant Electrical & control system. Preventive & Breakdown Maintenance in the field of Oil & Gas and Petrochemical Industry. Installation, Maintenance & Trouble shooting of Electric drives, HT & LT Switchgears & Protection Relays, Control Panels

Experienced Geologist with all types of Petroleum Geology experience including conventional, tight sand, shale & CBM.

To secure a position that will maximize my talent and expose me to the new challenges, as well as satisfaction in my immediate environment through hard work and professionalism

Drilling Engineer

Expertise in working with PFD's and P&ID's, Process Design Calculations and Process Simulators

Two years of experience in Process / Facility Engineering

Design Engineer with experience in 3D modelling and Stress Analysis

A highly motivated young engineer with proficient skills in ECLIPSE and Petrel RE, with great mind of problem solving, and with great personality in team work

Myself M.Tech in Naval Architecture seeking a responsible position in offshor eengineering. My area of interest is the structural analysis, fluid structure interaction, hydrodynamics, subsea pipelines analysis..

Piping Engineer

Drilling Technician

A seasoned subsea systems engineer with a detailed understanding of trees, controls and manifolds from front end feasibility and conceptualisation to offshore installation and commissioning.

Almost 28 years working in EPC at OIL & GAS.

Senior Structural Designer/Construction Support Specialist

qualified in six modules of different aspects of corrosion,and the confidence gained throughout the years while running my own consultancy

MWD Engineer

Control system designer / instrumentation

Civil / Structural Designer, PDMS, AutoCAD,

Quantitative Interpretation for Reservoir Characterization

13 Years Hands on Experience in Inspection (Plant Inspection) & Quality Control in Fabrication, Installation and Testing of Process & Utility Piping Work, Sub Sea Pipeline Work, Pressure Vessel and Offshore Steel Structures like Jacket, Deck, Bridge etc. in the field of Oil & Gas Development.

•Over 20 years of experience. •DCS- Delta-V , Foxboro I/A system and YOKOGAWA . •PLCs- Gould Modicon, Askawa, August Systems, HIMA etc. •Foundation Field Bus •Analytical systems Design and Engineering - Physical Property Analyzers, NIR •Field Inst. Engineering. •System commissioning.

Company representative on sales negotiations and jobs. Coil Tubing Operator on OTIS coil tubing unit. Heavy equipment maintenance, boilers, pumps, compressors, and turbines.

Solid knowledge of Microsoft Office Suite, CoralDraw, Foltran, Qbasic, Visual Fox Pro and Mathcad, Autocad, Staad Pro, Sap 2000, Advanced knowledge of VISUAL BASIC applications for EXCEL, ACCES, WORD, POWER POINT, AutoCAD and STAAD PRO, electronic mail and Internet.

Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.

B.Eng in Chemical Engineering; Diploma in Mud (Drilling Fluids) Engineering.

Diploma in Mechanical Engineering, Diploma in Industrial Safety from Central Labour Institute- Mumbai, H2S Awareness & Rescue Operation, Safe Journey Management, Road Safety Management, Job Hazard Analysis, Permit to Work System, Gas Testing, Incident investigation & Accident reporting.

I have worked for multinational and International companies in the Middle East like General Dynamics, Babcock & Wilcox, and Delta Corporation. I look for a job as QA/QC Engineer/Specialist or Plant Manager.

I have 15+ years experience as an Instrumentation & Control Systems Design Engineer along with seven years I&C construction and commissioning experience at locations throughout the globe.

I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical , Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction.

A Mechanical Engineering PhD graduate seeking engineering and research work as a Mechanical Engineer.

•Ability to solve petroleum production problems involving design of petroleum production facilities •Engineering and project management experience in the oil industry •Strong planning, communication and presentation software skills

15 years experienced Mud engineer. Drilling fluids design, testing and well site engineering. Solids control equipment management

Drilling Engineer with 12 years of experience in drilling and workover supervision, including 2 years of well construction planning. Also 1 year of work as a Safety Engineer.

Electric Technical Officer (ETO)

I have over 11-year field exploitation and G&G Modeling and reservoir simulation experince and extensive competency in reservoir management, economic evaluation, reserve estimating and booking, risk analysis, welltest interpretation, well perfomance analysis and stimulations.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out