Resume - Over 15 years of relevant experience in Mechanical Engineering and management. O...

Misco Jobs

Resume #44290

CONTACT INFORMATION:
View contact information...

SUMMARY
Master's Degree in Mechanical Engineering (1982 – 1987)
Over 15 years of relevant experience in Mechanical Engineering and man-agement.
Over 5 years of technical authorship in Oil & Gas Industry.
Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.
Capability to design various equipment such as rotation equipment, gear systems, piping, etc.
Industrial and commercial documentation preparation.
Material and labour cost estimate resulted in reducing expenses.
Improvements and modifications of the existed systems design resulted in better performance.
Strong design, analytical and mathematical capabilities.
Pre-commissioning/commissioning procedures development and their execution.
Experience in installation, erection, inspection and operation of heavy duty equipment and machinery and maintenance of related documents.
Assistance with Factory Acceptance Tests and training requirements re-view for service personnel.
Machinery, equipment maintenance and planned repair schedules devel-opment and supervision during their implementation.
Spare parts and fuel procurement and control over their proper utilization
Vast knowledge of Russian/Kazakh design and construction legislation and working practices in Former Soviet Union countries.
Safety and On the Job Training (OJT), managing a large team of employ-ees.
Lifting equipment handling training for personnel.
CDL with hazard material and double/triple endorsement.
Profound knowledge of transportation.
Customer service skills - communication skills, strong interpersonal and problem solving skills.
Organized and systematic with troubleshooting and problem assessment skills. Highly motivated with a positive attitude.
Exposure to severe weather conditions and low temperatures is normal.

OBJECTIVE
To secure a position related to the mechanical field to utilize my knowl-edge and experience.

EDUCATION & PROFESSIONAL AFFILIATIONS
1987-2001 Professional development training at least once a year: safety courses and management skills development
1988 Advanced training "Economics advancement, labor organization and management"
1982 – 1987 Master's Degree in Mechanical Engineering (US equivalency),
Siberian Institute of Metallurgy
Novokuznetsk, Russia
Course by course certified analysis is available upon request

2005 – 2006 San Jacinto College, Diesel Technology Program, Preparation for PE exam

Activities during the course:

* Using lathe and milling machine made parts that are no longer manufactured or difficult to find for replacement on outdated diesel engines and some parts for the machines themselves
* Using above mentioned machines designed and made each component for a timing gage for a Cummins diesel engine and assemble it into one unit (available for demonstration)
* Built McCoy's lubricator mock-up for students as a visual teaching aid, which demonstrates the design and explains an operating principle.
* Improved Chevy transmission design making it less complex by replacing the lever system with a flexible shaft
* Assisting students during leaning process by explaining processes taking place inside of an engine, adjustment procedures, ways to repair engines, different tricks and tips, utilization of different instruments and tools.
* Tested and graded students' knowledge at the professor's request.

EXPERIENCE
2006 – present Stewart & Stevenson, LLC., Oil & Gas equipment division, Houston, Texas. Mechanical engineer. Coiled tubing design, improvement, calculations, drawings.

2001 – 2006 NBKar Inc., Technical translation services, Houston, Texas, USA

Senior engineering editor.
Duties include:
Documentation, drawings, proofreading; quality control and check for conformity of terminology to appropriate Russian standards, and editing for various projects in Oil & Gas Industry, including:
* GE Oil & Gas – compressor packages vendor for Agip KCO
Revision of the following drawings: General arrangements, Detail drawings, P&IDs. Documents: O&M Manuals, associated instrumentation and equipment description.
* Sakhalin II Project (AMEC, Parsons E&C)
Offshore platforms and well equipment Installation & Maintenance Manuals, surveys and feasibility studies, project specifications, etc.
* Kashagan East Field Development Project
WorleyParsons – Onshore Facilities design documentation and drawings
Technomare - Offshore Facilities design documentation and drawings

And other projects.
The following is a partial list of project documents (document titles) related to the Kashagan Project onshore and offshore activities revised and edited:
1. Project Onshore Health, Safety And Environmental Phi-Losophy
2. Firewater Demand Calculation
3. Drilling Island Closed Drain Pumps
4. Open Drain Water Vertical Pumps
5. Passive Fire Protection Philosophy – Onshore
6. Mechanical Equipment List For Oil, Gas And Sulphur
Facilities
7. Mechanical Equipment Utilities & Offsites
8. Safe Refuge Integrity Study
9. Mechanical Design Calculations 24" Gas Export Pipeline
10. Insulation And Winterisation Philosophy
11. Specification For Scraper Launchers And Receivers
12. Scope Of Work For (Epc) Engineering, Procurement,
Installation And Commissioning Of The Oil Export Pipeline
13. Emergency Shutdown System Functional Specification
14. Welded Steel Storage Tanks
15. Ler Riser Island – Loadout And Installation Naval Analysis
16. Specification For Pipeline Internal Coating
17. Fuel Gas Metering Package Specification
18. Engineering, Procurement, Installation And Commissioning Of The Gas Export Pipeline
19. Compressor Operation And Maintenance Manual
20. Lube Oil System Operating Philosophy
21. Material Safety Data Sheets

Novokuznetsk Aluminum Plant city of Novokuznetsk, Russia, Western Siberia
Maintenance/Design Engineer
Automotive Department Head (last 2 years)
Responsibility included the following:
Hiring new employees. Safety and on the job training in compliance with the Russian regulations for all employees but mainly for college and uni-versity graduates. Standard instructions/courses were utilized but I up-dated and amended them when technology changed, new equipment from foreign vendors became available.
Managing 150 employees including but not limited to mechanical techni-cians, machinists, drivers, excavator and bulldozer operators, welders, electricians, university graduates who were just starting their careers in mechanical engineering.
Work hours control and monitoring
Maintenance and repair of different kinds of plant heavy duty vehicles, machinery and equipment such as engines, pumps, separators, steam turbines, alternators, compressors, bulldozers, draglines, cranes, lifting equipment. Availability of a large and well equipped mechanical shop and trained specialists allows this facility to accept orders for repairs from other local companies producing coal and gas for the Western Siberian market.
Repair plans and schedules compilation, spare parts and fuel procurement and control of their proper utilization
Scheduled, unscheduled and emergency repairs execution and supervi-sion
Equipment installation in accordance with the manufacturer's instructions (from Russia, Japan, Germany)
Malfunctions and defects identification, vehicles and equipment inspec-tion, maintenance and repair
Diagnosing system and equipment faults and implementing approved corrective actions
Decision-making on installation procedures during replacement of depre-ciated units/parts in a production line
Packaged equipment (plant operation) pre-commissioning/commissioning procedures development and their execution
Preparation of assignments for night shift workers, control and managing night shifts operation, including plant security personal
Subcontractors' proposal evaluations and recommendations.
Internal and contractors audits on Quality/HSE in accordance with ISO 14001 Environment Management System and ISO 9001 quality con-trol system
Production, review and checking of engineering specifications, requisi-tions & documentation.
Preparation, review and assessment of technical reports.
Liaison with different disciplines specialists to coordinate and integrate all campaign activities to fit into one workable plan
Mentoring activities for interns and graduate students:
Familiarization with the plant operations, departments, teaching safety rules, safe work procedures, etc.

LEGAL STATUS
U.S. / Russian dual citizenship (travel to Russia, Kazakhstan and other CIS countries with no visa requirements)

LANGUAGES
Mother Language: Russian
English: read, speak, write
SOFTWARE
Autodesk Inventor, AutoCAD

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 7055)

Go to Search Parameters...

Brief Description

A proactive and analytical Mechanical Engineer with over 12 years experience of Working in a Multinational and Multi cultural work environment in fabrication operations, welding processes, project management, quality / process enhancement ,maintenance with highly regarded organizations.

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

Sr. Piping Designer - CadWorx/AutoPlant

An ambitious and highly skilled Petroleum engineer with extensive experience in reservoir engineering, well testing, reservoir fluid analysis, ISO certification, production, management, product development and launch, and customer support.

Contracts specialist with Engineering background having more than two decades experience in both Operating and Contracting companies.

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

Reservoir Engineer

PDMS Instrumentation Designer

Well experienced in the field of Mechanical maintenace of rotating equipments like compressors, pumps,turbines in Petrochemical and Oil & Gas Industry in India and Middle East. Worked with Shell affiliate NOCIL in India, Reliance India and Sabic, KSA as Mech.Technician & Supervisor.

QA/QC Engineer in onshore oil field with ASNT Level -II in UT RT PT MT . M.TECH and B.TECH in Mechanical Engineering.B.TE

Electricial technician now i am working in mask oil qatar

PDS(2.5Years),SmartPlant,Navisworks,MicrostationV7.1(3Years),AutoCad2006(5 years),MS-Office

Skill: 11 Years Structural designer ( Including 2 Y rs. in PDMS , 2 Yrs. in PDS & Micro-Station ,3 Yrs. in X-Steel , 4 Yrs. Auto-Cad ) Qualification: B.E Production Engineering - First class – April 2009 – MIT Anna University, Diploma in Mechanical Engineering – First class - April 1998.

I start my profession life from Techno Agriculture when I done Agriculture machinery repairing. After that I went to Saudi Oger and work on Hydraulic

Total 7+ years of experience in Refinery, Petro chemical, Power Plants (steel & RCC structures) and Industrial Buildings.

Project Engineer with filed experience in Marine industry, oil & gas and renewable energy industry

A qualified mechanical engineer having a litany of professional courses with 11+ years of extensive track record in heading key engineering divisions and technical operations/maintenance, across diverse geographical locations in the Oil & Gas industry, seeking a managerial/engineering position with

Rock physics / Petrophysics

“Petroleum and Gases” University Ploiesti, Romania

Over 6 years of experience in analysis and design of steel and concrete structures

15 Years Geospatial Experience. Oil/Gas, Pipeline Design/Engineering, Land Management, Geospatial RDMS

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Registered Professional Engineer in Ontario, Canada, Mechanical Engineer BSc. & M.Eng.

Project Management and General Management Professional

Project /construction director/manager FPFO, Jacket and decks, Modules, loading terminals (shallow and deep water)

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

Sr. piping design

Professional Civil Engineer with over 11 years of experience in the oil and gas industry focused in the analysis and design of different types of structures, such as frameworks, pipe racks, bridge trusses, operation platforms, vertical tanks supports and their foundation, and retaining walls.

A geologist with experience in the oil industry involving exploration and development projects in Guatemala South Peten basin, geological information database management, mud logging in oil drilling activities, oil tanks gauging(1996-2004). Logging geologist in USA (Nov 2005-Mar 2009)

Experienced and motivated Ph.D mechanical Engineer

Oilfield Experience 34 years. 33 years with Well Services. I began my career as Well services Technician and my last jobs with Well Services as a Team Leader responsible for Slick Line operation in both Gas and Oil wells.

Civil engineer/pipeline precommissioning

multi-disciplined autocad designer

Performing work as per international standards following operational excellence management system

Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

Experienced Drilling and DHS Supervisor

M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing

Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,

Instrumentation and Control - FEED, Detail Design, Construction, Pre-Commissioning, Commissioning

12 Years of Experience in Oil & Gas, Industrial & Construction Safety (HSE Training)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out