Resume - I have ten years experience in SITEP (ENI partner) and my qualification is Maint...

Misco Jobs

Resume #45206

CONTACT INFORMATION:
View contact information...

DIPLÔMA
* 1992: Secondary school graduate.
* 1996: Electrical Engineering with Automatic option in Higher Institute of Technical Science in Tunis

Acquired language
* Arabic
* French
* English

WORK EXPERIENCE
- From the 1997 to the 1999: Lead Instrumentation Technician with SITEP (Company ITALO-TUNISIENNE of Oil Exploitation)
- From January 2000 to current date, working as the assistant Maintenance supervisor of station equipment (Injection water, Gas Lift and oil separation station) in the SITEP El Borma field.
I acquired experience in the following:
- Prepare or review with engineering, design work connected with minor or major capital projects and expense items, for modification and alterations to existing systems or the installation of new equipment and systems, either by the Maintenance department, if the work is done in-house, or through outside contractors
- Start-up, Corrective & Preventive maintenance, installation, troubleshooting and overhauling of Gas lift compressors station (tow and three stages) NuovoPignone and Dresser/Rand compressors
- Programming and coordination of project for expansion and restoration
- Migration DCS to SCADA (Supervisor Control and Data Acquisition) with PLC project programming by SIMATIC Software on Siemens S7-300 Automate and monitoring Software as Wincc and WINLOG
- Metering system: Installation and configuration of liquid flow meters on electromagnetic (KROHNE IFM4080), Coriolis with (Micro Motion), Ultrasonic (CONTROLOTRON 1010 System, Krohne ) and Vortex (I.TT.Barton, Oil Gear)
- Gas flow meters systems: Installation, setup and configuration Calculators: BRISTOL Meci CDN 12, DANILL Model 223S and Rosemount 3095 MV
- Installation and setting of high technology instruments With Hart pocket 275/375, ProfiBus and Fieldbus, as Rosemount Transmitters (1151, 3051, 3144, 3244.), Krohne (BM100) and fisher (FIELDVUE DLC 3000)
- Installation and setting of Tank gauging systems as Krohne ( BM70 radar ) and Enraf ( SmartRadar)
- Installation, setup and configuration of Temperature monitoring Bently Nevada 3500
- well-known with RTDs and different types of Thermocouples
- well-known with Vibration monitoring systems, Bently Nevada 7200 & 3300 series
- Installation, testing, calibration and trouble shooting of Analog (4 -20 mA, 0 – 10 VDC) Instruments such as pressure transducers (Foxboro electronics, Taylor) level transducers (Fisher 2390), Instrument Recorders (CHINO BR1000, Honywell, Ykogawa I.T.T Barton and Foxboro )
- Repair and testing of electronic boards in control room (SPEC 200 Foxboro), Annunciation systems, Safety panels (MSA and DRGAR)
- Maintain and updates ESD & FG systems
- Repair and maintain pneumatic equipment as transmitters, Positioners (Moore, Gouald) and controllers (Fisher 275, Masoneilan, Foxboro,)
- Maintain control valves (Fisher, Mokveld, Pinon Sud)
- Wiring and Protection low voltage equipment (380V/220V)
- Revamping, Upgrading, and calibration test submersible pumps (Centrilift and Reda pumps) bench
- Inventory control and ordering of the spare parts
- Data Sheet preparation, P&ID document up dating, instrument time bound calibration and maintenance High computer literacy in both office and technical / engineering applications.
Training
- From 20/06/2005 to 24/06/2005: On the programming logical control (PLC) level 2
- From the 20/04/2004 to the 05/05/2004: SCADA for control of the processes: improvement on the programming of the Siemens PLC and the monitoring software for (IFX and WinCC)
- 2002 one week of training: Management of the projects using MSProject 2000
- 2002 February: Management and planning of projects
- June 2001: 15 days training on maintenance of Dresser/Rand VIP recipicating compressors
- 2001 one week training: Method A.M.D.E.C for petroleum companies
- 2000 one months training: Instrumentation for engineers
- August 1999 training: English course at the British Consulate

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 6432)

Go to Search Parameters...

Brief Description

PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.

Environmental pollution monitoring and assessment. Post Graduate Diploma in Environmental Management in 2004 from Sagar university (M.P.).

Experienced Supervisor in the Electric Submersible Pump Industry

*Offshore pipeline installation engineer, Project engineer in major pipeline projects

Reservoir Engineer

Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.

Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.

Senior Chemical Integrity Engineer

Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation

Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance

I have 12 years experience in Automation(DCS & PLC). I also worked as project management.

I am a Mechanical engineer with twelve years of experience. I am responsible for the execution of maintenance of rotary &stationary equipments in petrochemical Industry, spares planning, manpower planning and contract fixing etc

For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.

Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.

Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.

I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.

I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....

A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors

INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks

Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.

SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.

BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)

Mechanical engineer specialised in naval welding with 15 years experience seeking a full time job.

Junior well engineer, Design engineer

Qualification: MSc Corrosion Control Engineering Experience

Instrument Engineer

Bachelor's in Commerce plus Mechanical Diploma

Production engineering, production supervision of field with 50 production well+ 2 injectors. Optimization of operations, supervision of workover , reentry operations for old wells. Experience is only within Kazakhstan.

EXPERIENCED IN PIPING DESIGNER AND PLANT ENGINEERING, KNOWLEDGEABLE IN PIPING DETAILED LAYOUT, PIPING PLANS (G.A), PIPING ISOMETRICS, LINE LIST, SPECIAL ITEMS LIST, MTO’S AND SPECIAL PIPE SUPPORTS WITH RESPECT TO PLOT PLANS, LINE LIST, PFD’S, P&ID’S AND OTHER RELATED INFORMATION DRAWINGS.

Telecom engineer/technician SDH,CCTV,PABX

Petroleum Engineer with 7 years experience in the oilfield.

I have over 15 years of experience in this field and acquired enough knowledge. I had handled very challenging assignments. As an Instrument foreman I was fully involved in my business wherein I had to identify potential opportunities and gain wide knowledge.

US Citizen, Petroleum E&P Support Advisor/Team Lead /Managing Consultant with superior Vendor-Certified Petro-Computing skills and extensive experience in Multi-Vendor/Multi-Applications User Support, Training and Mentoring for Exploration, Appraisal & Production

I have ten years experience in SITEP (ENI partner) and my qualification is Maintenance supervisor

5 Years Experience in Piping and PDS

Six years of solid experience in Process Control and Automation Engineering. Hands on expertise with Rockwell Automation, Emerson DeltaV Control Systems and AMS Device Manager. Has excellent communication, creative problem solving and effective project management skills.

Mechanical Engineer - Heat Transfer/Static Equipment

Analyzer Engineer

I am chemical engineer seeking position is Production, process and design. I am harworking and good learner of new technology. I have excellent interpersonel skills and organisational skills.

I am a mechanical engineer with experience in the Power Generation industry. I have worked for Siemens/Westinghouse as a field engineer, managing gas turbine upgrades and repairs. Also I have worked for Air Products supervising hydrogen plant construction and operations. My background also includes

A result oriented professional with proven abilities in plant Electrical & control system. Preventive & Breakdown Maintenance in the field of Oil & Gas and Petrochemical Industry. Installation, Maintenance & Trouble shooting of Electric drives, HT & LT Switchgears & Protection Relays, Control Panels

Master of Engineering ¡V Petroleum Systems, University of Regina, Canada

Electronic/Diesel Hydraulic/Controls Technical Writier with field and military experiance.

Drilling Technician

A seasoned subsea systems engineer with a detailed understanding of trees, controls and manifolds from front end feasibility and conceptualisation to offshore installation and commissioning.

Project Management and Engineering Experience in Oil-Gas-Refining, commercial and other industrial sectors.

qualified in six modules of different aspects of corrosion,and the confidence gained throughout the years while running my own consultancy

MWD Engineer

Control system designer / instrumentation

Civil / Structural Designer, PDMS, AutoCAD,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out