Resume - Objective: I would like to pursue a challenging position in the oil and gas indu...

Misco Jobs

Resume #45623

CONTACT INFORMATION:
View contact information...

OBJECTIVE
I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

SUMMARY OF QUALIFICATIONS
Approximately five years of economic and development geology experience identifying potential oil and gas prospects along the Texas Coast, East Texas and the Fort Worth Basin. I have worked with partnership groups structuring income funded drilling deals. I have also performed pre and post drill economics and risk analysis for prospective drilling prospects.

PROFESSIONAL EXPERIENCE
2003-present Quality Assurance Manager Houston, Texas
- Currently working as an independent contractor for an industrial wastewater treatment facility performing quality assurance for geotechnical and construction practices.

1988 - 2003 Parsons Engineering Science Houston, Texas
Principal Geologist / Hydrogeologist
- Employed as a Principal Geologist/Hydrogeologist and Field Manager of Operations on numer-ous federal Department of Defense and Department of Energy sites solving soil and groundwa-ter contamination problems. Personally mapped over 800,000 acres of groundwater aquifers in the northwest for state EPA review of contaminant migration.

1987-1988 Texas World Operations Houston, Texas
Contract Environmental Geologist
- Senior Geologist responsible for subsurface mapping and documentation of the local and re-gional geology necessary for state and federal permits to continue injection of Class I hazard-ous waste in deep injection wells for clients in Texas and the Midwest.

1986-1987 Dickinson Independent School District Dickinson, Texas
- Substitute high school teacher for mathematics and physical sciences.

1981 - 1986 Development Geologist Damson Oil Corporation, Houston, Texas
- Development geologist responsible for the evaluation and drilling of company owned properties. I was lead geologist for water flood recovery projects in the Fort Worth Basin area. Duties as development geologist consisted of evaluating and mapping oil and gas plays and presenting potential drilling candidates to management for drilling or farm-outs. I worked with reservoir en-gineering and gathered necessary data needed for determining pre and post drill economics for all company oil and gas prospects. In addition, I worked closely with the partnerships depart-ment for the income funded drilling groups and reviewed farm-in prospects for partnership drill-ing funds. In addition, I performed well site electric well logging duties and calculations neces-sary for determining if the well was to be completed for production.
- Courses completed while in the oil and gas industry were Gearhart Well Log Interpretation, Schlumberger Well Log Interpretation, Schlumberger mud logging, Formation Evaluation (Oil and Gas Consultants International), Contracts Used in Oil and Gas (Institute for Energy Devel-opment) and Subsurface Exploration Stratigraphy (Institute for Energy Development).

1979-1981 College Student
- Returned to school to complete BS and MS degrees in geology

1975-1979 ARCO Chemical Company Channelview, Texas
Senior Analyst
- Responsible for the daily laboratory testing of effluent and process water. Interacted with pro-ject chemist in the development of new and specialty testing procedures for water contami-nants. Trained new employees in testing procedures revised and updated the environmental training manual and devised and implemented a test for technician advancement in the de-partment.

EDUCATION
* B.S. Wildlife and Fisheries Science, Texas A&M University, College Station, Texas.
* B.S. Geology, Lamar University, Beaumont, Texas.
* M.S. Geology (Physical Science), University of Houston Clear Lake, Houston, Texas

PUBLICATIONS
* "Groundwater/Surface Water Interaction at Tinker Air Force Base, Oklahoma," Duran, K.; Pawlik, J.; Bauer, J.; Yu, J.; Dawson, J.
* "Zero Valent Iron Injection In Fractured Sandstone " Paper in progress

OTHER TRAINING
* Groundwater Pollution and Hydrology, Princeton Course
* Project Management Training, Parsons
* Hazardous Waste Management, Texas A&M
* OSHA 40 Hour Training and Supervisor Training

REFERENCES
* Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 7041)

Go to Search Parameters...

Brief Description

Static Equipment Mechanical Engineer

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Full hands-on maintenance, Working under extreme conditions

M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission

Linux/Storage Admin

Piping detail design isometric MTO and layout detailng etc

Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation

Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators

Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).

I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.

Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.

Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India

Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.

SENIOR PIPING / MECANICAL DESIGNER

Geotechnical Field Rep

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.

NAval architect

Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),

QA/QC Inspection Engineer

I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.

A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.

Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

Reservoir or Production Engineer

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.

Static equipment like vessel, tank and heat exchanger

BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

See resume body

Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

Oil and gas production, well testing, gas lift wells performance, Gas lifting optimization and automation, Gas sweetening efficiency, improve chemical injection to better water separation and minimize the consumables, giving training of local operators and engineers. Operation and production techno

I am a Chemical Engineer having 10 yrs of valuable experience in various areas of petroleum refining including unit operation, Revamp jobs, Process engineering, Process Modification, PFD/P&ID review, HAZOP study, Safety review, troubleshooting, Advance Process Control, Simulation Studies

Mechanical Supervisor/technician

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out