Resume - Experienced Electronics and Communication Engineer for 13 years, performing elec...

Misco Jobs

Resume #46055

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To work in a prestigious company as Electronic Technician and to apply the solid experiences in the field of electronics and communications.

SUMMARY OF WORK:
Performing electronic and communication engineering task, handling field technical work which includes radio operation, bench troubleshooting, maintenance, installation, testing and commissioning.

WORK EXPERIENCES:
Company: WAHA OIL COMPANY
Tripoli Libya

Department: Engineering
Technical Services/Communication Division

Position: Senior Communication Technician
(Desert Field Based Personnel)

Period: 12 December 1997 to 12 December 2006

Job Description and Responsibilities:
Maintenance and troubleshooting of SCADA (Supervisory Control and Data Acquisition) facilities for both software and hardware used by desert Microwave Radio System

Repair and troubleshooting of AC/DC equipments. ( SCR controlled rectifier, Chargers, Auxiliary Power Supply.(Voigth Haffner, Telco)

Installation of Systronics Radios used by RTU for telemetry system

Outside and inside plant cabling of PBX (Private Telephone Exchange) for both main distribution and subscriber lines.(Mitel)

Local Area network structured cabling

Fiber Optical multiplexer maintenance and trouble shooting(SAGEM)

Installation and maintenance of 2Ghz microwave radios.(BOSCH/MARCONI)

Installation and maintenance of PBX( Private Telephone Exchange)

Installation of UHF/VHF/SSB radios in oil and gas rigs.(TAIT/PAE/CODAN/NIROS/SAILOR/ICOM)

Provide on call assistance to Control Room Operators in isolating communication failure reports.

Installation and maintenance of aviation weather station and communication landing instrument (NDB) non directional beacon and VHF radio system.(VAISALA/SOUTHERN AVIONICS)

Installation of video conference system. (SONY/NEC)

Acting Assistant Regional Area Controller.

Company: METROPOLITAN BANK AND TRUST COMPANY
Lucena City Philippines

Department: Network Communication and Engineering Department
Electronic Data Processing Division

Position: Equipment Engineer
Period: 16 November 1992 to 16 November 1996

Job Description and Responsibilities:

Installation, configuration and maintenance of tellers clustered terminals (Pinaccle Share Processor)

Installation of ATM (Automated Teller Machine)(NCR)

Installation of data communication equipments used by the bank on-line system (modem, multiplexer, controllers)(MOTOROLLA/RACAL/NOKIA)

Installation and repair of UPS (Un-interruptible Power Supply)(SOLA /EXIDE 3KVA/5KVA UPS)

Installation of bank computers and financial software.

Installation and commissioning of bank vault alarm system (Radio Frequency Controlled Alarm)

Company: PHILIPPINE WIRELESS INCORPORATED
Pocketbell Philippines
San Pablo City Philippines

Department: Engineering
Operation /Switching and Transmission Division

Position: Cadet Engineer
Period: 17 July 1990 to 16 November 1996

Job Description and Responsibilities:
Installation and maintenance of long distance paging transmission system(GLENAYRE)

Repair and programming of alphanumeric and voice paging units.(NEC)

Installation of UHF (Ultra High Frequency) and VHF ( Very High Frequency) antennas for remote long distance paging transceiver.(NEC/MOTOROLLA)

Configuration of remote data communication equipments.

Cabling jobs for in-house paging system and medium size telephone exchange.

Acting Asst. Site Supervisor

Company: GIRL SCOUT OF THE PHILIPPINES Restaurant
Port Area Cebu City

Department: Services
(Self Supporting Student)

Position: Restaurant Head Waiter
Period: 01 March 1984 to 01 March 1988

Job Description and Responsibilities:
Customer service and food handling

Responsible for the itinerary and scheduling of co-waiters and daily monitoring of supply inventory.

Acting Assistant Cashier.

EDUCATION: Engineering

College Cebu Institute of Technology
Cebu City Philippines
Bachelor of Science in Electronics and Communication Eng'g.
1983-1988

High School: East Visayan Academy
Talisay Bulacao Cebu Philippines
1979-1983

Elementary: Ocampo Central School
Ocampo Camarines Sur
1973-1979

Examination Taken:
Electronics and Communication Engineering Board Examination- Nov. 1989- Passed

Seminar and Training:
Unix Operating System on December 11-14,1991 conducted by ASSYST COMPANY at Pocketbell Philippines Main Office Cubao Quezon City Philippines.

Preventive maintenance seminar technique for Data Communication equipment and Tellers Clustered Terminal on April 1993 conducted by MBTC Engineers at Metropolitan Bank and Trust Company Head Office Makati city Philippines

Automated Teller Machine preventive maintenance and installation on April 1994 conducted bu NCR Engineer at MBTC Head Office Makati City Philippines.

Microsoft NT Windows Workstation Installation November 1996.

Basic Safety Course(Basic Fire Fighting, Medical Emergency /Personal Survival) (SOLAS) January 20-25-1997 conducted by Maritime Training Center of the Philippines (MTCP). Redo Bldg., 951 Remedios St., Cor. San Marcelino Sts., Malate Manila Philippines.

Installation and Maintenance of 2 Giga hertz microwave radio system. Conducted by Marconi Engineer on April 2004 at Waha Field.

Extra-Curricular Activities:

Member: Institute of Electronics and Communication Engineers of the Phils.

SPECIAL SKILL:
Troubleshooting and installation of electronics and communication equipments
Computer operation
Driving

Character References:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 7045)

Go to Search Parameters...

Brief Description

Total work experience of 5 years as Chemical engineer. Core competency on steady state process simulation, optimization & de-bottlenecking in the field of Petrochemical & Refinery

Large Water treatment plant like RO plant, DM Plant, Ultra filtration plant, Pretreatment plant Operation, Maintenance and analysis. Large Power plant Boiler(High Pressure Boilers) Water Chemical Treatment and Analysis, Cooling Tower water chemical treatment and analysis, Environmental(Ambient air,

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Geologist/Hydrogeologist, 18 years experience, environmental, sedimentary and glacial bedrock and soil deposits, 3-dimensional characterization of fracture zones in bedrock, LNAPL and DNAPL migration pathway analysis.

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have 20+ years experience in all aspects of electical work, i.e. construction, testing and inspection and commissioning at home and abroad, onshore and offshore.

Reliability Engineer

A good team player with proven communication skills and ability to Motivate People, drive changes and strive for continual Improvement; Excellent People Management and Interpersonal Skills.

Scaffolding engineer Certified from CITB UK.

I have a M.S. in Petroleum Engineering with emphasis in flow assurance issues. Through my experience I have gain great communication and technical writing skills. Also been in a project has gave me the ability to work well both in teams and individually.

Piping designer, Pipe stress engineer

Mechanical Engineer (Piping- Lyout/PDS)

Working as a instrument technician in al- jubail petrochemical plant saudi arabia. involve in on line instrument and maintenace in low low density poly ehthelene plant(LLDPE) AND (LDPE) low density poly etheylene plabnmt.good knowlawdge of all type honey well ,yokogawa,foxboro and rosemount fisher

Designer/Drafter with Inventor experience.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

instrument supervisor libiya.

Drilling Engineer with 4 years experience ,working for a leading Exploration and Production Operator.• Responsible for planning and executing well designs and workover programmes for producer and water injection wells.• Monitor follow all phases of the daily drilling and completion operations, perfo

i am project manager assistant in pressure vessel and road tanks,cylider and on/offsure projects in industrial inspection company

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Schlumberger 17 years Coiled Tubing / Nitrogen services/Fracturing

Design and drafting OIl and Gas processign facilities, Structural, Piping, Civil. 7 Years experience with 3D CADWORX modelling on Canadian and international projects. Recently worked on Enterprise's Meeker II facility as well as Green River Gas Plant (PROPAK) early 90's.

Bilingual English-Spanish Project Manager with over 6 years of experience working for diverse industries including the Oil, the light and heavy construction, and the Steel Production.

I would like to apply with your company for the position of a INSTRUMENT SUPERVISOR /TECHNICIAN I have 11 years of oilfield ,gas plant ,power plant and some process plants experience as an SUPERVISOR, TECHNICIAN . I am having good work experiance with clients like ENI , IRAN PHASES 4 & 5 KOC -

Responsible for crude evaluation, expansion project related configuration studies, perspective planning and scenario analysis and retro analysis.

I have completed my Masters degree in Chemical Engineering from Lamar University. I have experience in ASPEN PLUS, ASPEN DYNAMICS, HYSYS, PRO-II for two years. I did my internship in Dynamic Engineering Purity Inc. for six months.

HYSYS simulations, process design, optimization, Process flow diagrams (PFD) and P&ID

Presently I am working with M/s B. S. Chaudhry & Co. as a Mud Engineer on E 760-II (1600 HP SCR), M 900-1 (900 HP), M 750 (750 HP), Cardwell-6, & Cardwell-7 since Jan.-2007 to till date continue at Mehsana Asset under MMC contract with ONGCL

Having experience in Mechanical Engineering in the field more than 10 years of Oil and Gas and Manufacturing industries mostly in engineering and inspections. Has worked in INDIA,and SINGAPORE on Onshore & Offshore.

Substation Automation engineer with 5 years of experience

DCS, Control system and Maintenance Engineer

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

E & I designer

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

My interesting field is Process Engineering and I am ready to work in field run projects, main office or sales departments as a Process Engineer in oil & gas and Petrochemical Industries.

Rotating Equipment Engineer

Experience product and manufacturing engineer with strong understanding in design, product develoment, manufacturing, ECN,ERP

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out