Resume - I senior completion and workover engineer 19 yeas experience

Misco Jobs

Resume #46341

CONTACT INFORMATION:
View contact information...

CAREER
Petroleum Engineer with 18 Years Experience in Production Engineering; mainly Field Operations, production operation, Workovers, completion, production testing, bottom hole pressure testing and Artificial Lift Design & optimiztion

OBJECTIVE
Progressive Position to Develop 'Analytical, Organizational, Presentational, and Leadership Skills Through Hard Work and Dedication.

PERSONAL
Marital Status: Married Place of Birth: Tahrhona -Libya
Nationality: Libyan Children: Five
Date of Birth: 1/1/1962

EDUCATION
1968 - 1978 – Elansar primary (6+4 years) School
1979 -1981 – Suk Eljuma secondary school
1982 - 1986 BSc. in Petroleum Engineering, Bright Star University, Libya

EXPERIENCE
Compagnie due Petroleum Total Libya (CPTL); Tripoli
June 2001 –Present - Senior Completion and Workover Engineer

Scope of Work: As a leading member of the workover, completion and testing Engineering Section, assigned to "Mabruk onshore and part time for Aljurf offshore fields", where various fields and reservoirs total a producing capacity of 15,000 BOPD for onshore and 40,000 BOPD for offshore.

Specific Duties: Selected projects include;

1. Planning, preparing, reviewing, recommending, and processing completion and workover programs. Following up and modifying the same during their execution, workover activities including:

- Complete new oil, water and injector wells
- Change artificial lift system (ESP, SRP and PCP) or optimization.
- Clean hole from sand and deposition.
- Follow up implementing stimulation jobs for Vertical and horizontal wells.
- Change injector string
- Restoration suspended oil wells
- Reactivate shut-in oil well
- Convert producer oil well to injector well.

2. Coordinating with Reservoir Engineering to determine adequate reservoir management policies. Accordingly, planning and activating field operations such as production testing, well logging, well stimulation, pressure surveys and well workovers.

3. Monitoring and evaluating field and well performances and providing management with engineering advice and reports.

4. Interpretation cased and open hole logs (CBL, VDL, USIT, corrosion log, GR, SP and RES.)

5. Designing and supervising treatment and remedial cement squeezes for repair leaks or improve casing bond.

6. Design and prepare stimulation and testing programs for vertical and horizontal wells, Evaluate well performance after treatment and issue conclusion and recommendation.

7. Follows up day-to-day completion and workover operations and provide technical advice and recommendation for the field wells-supervisor.

8. Supervision completion & workover operations at well location, provide technical advice and recommendation.

9. Select and design artificial lift systems for oil and water producers (Electrical submersible pump (ESP), sucker rod pumps (SRP) and Progressive cavity pump (PCP) for oil well based on swabbing and flow test results.
10. Evaluating Improve artificial system for optimization well productivity and artificial lift pumping efficiency, based on well pressure and influx.

11. Follow up implementation workover program, discuss and supervising well supervisor during operation.

12. Forecast material requirement for completion and workover (well head type, completion string, suitable artificial lift and surface control equipment).

13. Monitoring production & injection in water flood, miscible flood schemes, well completion, recommending candidates for workover and stimulation.

14. Prepare production equipment requisitions for future needs (wellhead, tubing, packers, tubing anchor, down hole and surface sucker rod equipment, down hole ESP and surface equipment and PCP down and surface equipment, also evaluate offers and issue recommendation.

15. Prepare call for tender for production equipment and services (Stimulation, cementing, wire line, slick line testing, sampling…...), evaluate offers and issue recommendation.

16. Prepare workover rig specification as per field requirement.

17. Prepare call for tender for select workover rig, evaluate offers and issue recommendation.

18. Prepare and supervise wire line activities.

19. Prepare workover rig inspection procedure, evaluate status of rig and follow up rig repair actions.

20. Forecast, preparing, and recommending capital, expense and workover budgets. Specifying and coordinating the procurement of related equipment, materials and services. Evaluating bids with recommendations to management

21. Member of production follow up committee

22. Prepare Statistical & Workover summary utilizing Microsoft Excel software.

23. Investigating discrepancies between actual production and well test rates.

24. Liaising with Drilling, Reservoir and Operations Engineering Departments for joint projects and activities.

VEBA OIL OPERATIONS LIMITED (VOO); Tripoli

- Jan 1993 - June 2001 Office Production Engineer

2. Design, Prepare and issue completion and work-over programs for vertical oil and water producer and water injection well including:
- Complete new oil, water and injector wells
- Change artificial lift system (ESP, SRP and GL).
- Repair casing leak.
- Clean hole from sand and deposition.
- Vertical wells stimulation and follow up implementing.
- Change injector string
- Restoration suspended oil wells
- Reactivate shut-in oil well
- Convert producer oil well to injector well.

3. Interpretation cased hole and open hole logs (CBL, VDL, USIT, corrosion log GR, SP, RES.)

4. Select and design artificial lift system for oil and water producer wells (Electrical submersible pump (ESP), sucker rod pumps (SRP) and gas lift system for oil well based on swabbing and flow test results.

5. Forecast material requirement needs for workover and completion (well head, completion string, suitable artificial lift, injection system and surface control equipment).

6. Prepare production equipment requisitions (wellhead, producing string equipment, also evaluate offers and issue recommendation).

7. Evaluate and assess well performance coordinating with other department for program implementation.

8. Liaises with service companies and contractors as applicable to field work requirement.

9. Prepare and supervise wire-line activities for various oil fields including perforation and logging.

10. Prepare and supervise slick-line activities for various oil fields including collect sampling and measure bottom hole pressure survey.

11. Prepare reports for presentation to management and present engineering projects and achievements at partner's meetings.

VEBA OIL OPERATIONS LIMITED (VOO); Tripoli

Jan 1990 - Jan 1993 Field Junior Production Engineer

Scope of Work: As a Field Production Engineer, assigned to VOO's Western Concessions. The area of responsibility comprised several oil fields with a producing capacity 40,000 BOPD.

Specific Duties:
1. Follow up, implement completion & workover programs activities in field, and supervise for operations including:

* Complete new oil, water and injector wells
* Change artificial lift system (ESP, SRP and GL).
* Repair casing leak.
* Clean hole from sand and deposition.
* Change injector string
* Reactivate shut-in oil well
* Convert producer oil well to injector well.

2. Design and request for work-over (wellhead, producing string equipment, artificial).

3. Quick look Interpretation for cased hole and open hole logs (CBL, VDL, corrosion log GR, SP, RES.)

4. Followed up the daily oil production activities and field pressure performances.

5. Prepared weekly and monthly reports.

6. Evaluate and assess well performance coordinating with other department for program implementation.

7. Prepare and supervise wire-line activities for various oil fields including perforation and logging.

8. Prepare and supervise slick-line activities for various oil fields including collect sampling and measure bottom hole pressure survey.

9. Responsible for operate and monitoring more than 50 wells which producing with naturally flow, ESP, GL and SRP artificial system, the capacity of these wells from 100 up to 5000 BLPD.

10. Operate and monitoring production station facilities and operate gas lift compressing system.

11. Design and troubleshoot of continuous gas lift operations.

12. Monitoring production, injection in water flood and miscible flood schemes, well completion, and recommending candidates for workover and stimulation.

Mobil oil Libya; Tripoli
March 1987 - Jan 1990 Junior Production Engineer

Scope of Work: Scope of Work: As a Field Production Engineer, assigned to VOO's Western Concessions. The area of responsibility comprised several oil fields with a producing capacity 12,000 BOPD.

Specific Duties:
1. Followed up the daily oil production activities and field pressure performances.

2. Prepared weekly and monthly reports.

3. Follow up, implement completion & workover programs activities in field, and supervise for operations including:

* Complete new oil, water and injector wells
* Change artificial lift system (ESP, SRP and GL).
* Repair casing leak.
* Clean hole from sand and deposition.
* Change injector string
* Reactivate shut-in oil well
* Convert producer oil well to injector well.

4. Assist for design and request work-over and completion equipment (wellhead, producing string equipment, artificial).

5. Quick look Interpretation for cased hole and open hole logs (CBL, VDL, corrosion log GR, SP, RES.)

6. Evaluate and assess well performance coordinating with other department for program implementation.

7. Prepare and supervise wireline activities for various oil fields.

8. Responsible for operate and monitoring more than 50 wells which producing with naturally flow, ESP, GL and SRP artificial system, the capacity of these wells from 100 up to 5000 BLPD.

SEMINARS AND COURSES
Date Location Course Completed
1988 Tripoli Drilling, Production engineering and surface facilities.

1988 Tripoli Water injection tech. Course. & Corrosion in Oil Industry

1992 Tripoli Drilling fluid.

1992 Tripoli Basic Computer operating
1993

1996 Tripoli

Canada Cased and open hole logs interpretation

Drilling Operations
Open and Cased Hole Logging
Well Completion and Design Application
Well Stimulation (Perforation & Acidizing)
Workover Operations
Production and Surface Equipment

2002 Canada sucker rod pumping design
2004 UK Electrical Submersible pump design

2004 Tripoli Well Completion, workover and stimulation
2004 Cairo Sucker rod and pump unit course and forum
2004 France- pau Being successful in completion
2005 Holland Land Workover rigs inspection

LANGUAGES & IT
Fluent in Arabic and English

- Microsoft office, excel, work and power point.
- Subpump (for design ESP equipment)
- SRpump (for SRP design)
- PI, DDR & Wellview (for database)
- Canvas (for drawing).
- MMS (for Material stock)

AFFILIATIONS
* Member, Society of Petroleum Engineers of A.I.M.E., USA
* Member, Chamber of Petroleum Engineers of Libya

REFERENCES
Are available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 6519)

Go to Search Parameters...

Brief Description

Project Manager with 26 years experience managing Oil and Gas FEED, EPC, PMC, EPIC, and EPCM projects . Responsible for Senior Project Engineers, Contracts Administrators, Project Controls Engineers, Safety Engineers, and QA/QC personnel. Worked with and managed expatriate and multi-cultu

I am a graduated, experienced, professional marine engineer. 29 plus years of valuable engineering hands-on experience in the Maritime and Offshore Industry.

A dynamic professional with over 2 decades (25 years) of rich experience in Project Machinery Planning & Execution, Erection & Commissioning, Maintenance, Quality Assurance, Process Enhancements and Man Management.

I am holding a Master degree in Chemistry. I have 19 yeras of experience in Oil and Gas Industry. I worked as Drilling Fluid Specilaist for 11 years in Offshore and 3 years in land rigs. 5 years I worked as Refinery Quality Control Department. I have working for Oil and Natural Gas Corporation Ltd,

A B.Sc. Chemical Engineer with over 23 years of experience in oil&gas and Petrochemical Industry, I am specialist for different Petrochemical processes (Steam Reformer,H2/CO production-purification with Cold Box or PSA, Chlorine production and liquefaction…), commissioning and start-up. I am able to

22 years of experienced geophysicist/exploration specialist

ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6

Industrial Engineering

22 years of working experience in E& P Industries.Experience covers entire spectrum of Geophysics i.e. from Seismic Data Planning& Acquisition to Seismic Interpretation.

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

15 years of experience with visible/near-IR and hyperspectral imagery, and image exploitation (I have co-authored a book on hyperspectral remote sensing). I have a Ph.D. in Geology, an M.S. in Computer Science and I will have an M.S. in Applied Math in Spring 09.

With over 30 years in the Oil and Gas industry responsible for Health, Safety & Environment (HSE) and Loss Prevention (LP) activities on major offshore floating FPSO’s and fixed Installation projects. I can offer a broad range of safety experience from HSE/LP engineering to management.

25 years experience, experienced inj oil-gas field and reservoir development

Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.

Registered Professional Engineer (P.Eng) in the Province of Alberta.

Instrument technician with 13 years experience

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

Highly Experienced Crane and Lifting Engineer

Marine Engineer, Chief Engineer Unlimited

Have about 25 years of experience in logging operations (Open hole, Cased hole and Production Logging Services) and interpretation of well logs (Open hole, cased hole and Production Logging)

qa qc inspection oil gas engineer coordinator welding painting ndt auditing equipment

Accomplished PLC, HMI, automation, programmable controls specialist

A Production Engineer with over 25 years of oil and gas field experience in domestic and international operations. Solid record in building project teams in multidiscipline and multilingual work groups. Strengths include planning, organization, and communication.

+29 years of professional experience,7 years in materials laboratories and Seismological research Institutes, 22 years working for E&P oil and gas Companies in Venezuela.Expertise as Petrophysicist, background in science,extensive knowledge of computer language and application,experience in clastic

Electrical Engineer with more than 20 years of experience with PLC and HMI projects: Design, implementation and commissioning. I've worked in projectos for Food and beverage,

DRILLING ENGINEER

Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.

25 years of experience; more recently as Principal/Lead Engineer. 5 years in middle/senior management. Most contributions are in design, engineering & commissioning of pumps, compressors and turbines. Oil & Gas experience includes Refinery and Upstream, Marine, Pipeline pumping & compression stn.

I GRADUATED FROM TULSA UNIVERSITY ,OKLAHOMA,USA,1985.WITH A BACHELORE DEGREE IN PETROLEUM ENGINEERING,I HAVE A 24 YEARS OF EXPERIENCE IN DRILLING INDUSTRY , IN THE PRESENT TIME I'AM WORKING IN AN OIL CO. AS AN OPERATIONAL MANAGER.

17 yrs of experience in oil and gas industry including current assignment on offshore installation operations support, most recent oil and gas terminal design projects, commissioning group support, treatment works and pumping stations rehabilitation, pipeline construction and offshore platform.

Thirty years of experience in EH&S in the oil, construction, and the insurance industries. Throughout my career I have managed the safety and environmental requirements for drilling operations, gas processing plants, and offshore platforms. Participated in design review, permitting, environmental

A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment.

Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys.

Has over 24 years experience in instrumentation oil and gas, power generation , and process industries. Working experience as Commissioning supervisor to carry out Erection and commissioning of Control Instrumentation system for process industries & Thermal power stations. Successful commission

Wellservices Slickline Supervisor for the past thirty years.

Work experiance in plant maintenace , hydrogen plant and rig component and complete rig manufacturing. Welding and metalergy testing. Rig inspections covering all aspects. Thanks.

Qualification: B.Tech - Chemical Engineering, Skills: Pre-commissioning, commissioning, start up, test run and handing over of the plant to the operation department

Engineer, since 1988 when I graduated the Institute of Oil and Gas ,Ploiesti, Romania (IPG Ploiesti)

Senior Inspection Engineer

Well Integrity Specialist, Completion Production Engineer

I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis

Sales and marketing,Business development

HSE Advisor / Engineer / Co-ordinator

I senior completion and workover engineer 19 yeas experience

Integrity management engineer with world leading expertise

Corrosion and Metallurgy Engineer, Painting and Coating Inspector, Engineer, QA/QC Inspector, Manager

16 years of professional experience (after post graduation) in Engineering Consultancy for Front End Engineering & Design, Detailed Engineering, EPC, Different Plant Modifications of onshore & offshore Oil & Gas, Refinery, Utility facilities as Senior Mechanical Engineer and as Project Lead Engineer

Night pusher with 21 years experience in oil and gas industry

Installation, erection & Maintenance of rotary & stationery, light and heavy mechanical equipments on different projects such as continues Sand Casting plant, Textile Mills Machinery, automotive spare manufacturing industry , Caustic Recovery plant, Storage Tanks, Design / drawing and execution

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out