Resume - Over 25 years of experience in the oil and gas industry in: Quality Control and ...

Misco Jobs

Resume #4635

CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

NAME: Tiew DATE OF BIRTH: 15th February 1955
NATIONALITY: Malaysian
MARITAL STATUS: Married
HIGHEST EDUCATION AND QUALIFICATIONS:
PERIOD/DURATION DESCRIPTION / DETAILS
1977 Diploma In Mechanical Engineering from Federal Institute Of Technology.
1984 Certificate In Mechanical Engineering A232 from University Of Wisconsin - Extension Independent Study

1996 European Welding Inspector Level III
Expiry 21.11.2004 CSWIP Senior Welding Inspector
Expiry 17.09.2004 CSWIP Radiographic Interpretation (Welds) Group A, B,C & D
Expiry 14.03.2004 Certificate in ASNT Level II Radiographic Testing
Expiry 13.03.2006 Certificate in ASNT Level II Penetrant Testing
Expiry 27.02.2006 Certificate in ASNT Level II Magnetic Testing
Expiry 15.08.2005 IRATA Level I Rope Access (Abseiling)
2003 Diploma of International Welding Inspector (International Institute of Welding)
Expiry 31.01.2007 API 510 Authorized Pressure Vessel Inspector

PROFESSIONAL ASSOCIATIONS:
PERIOD/DURATION DESCRIPTION / DETAILS
Since 18.09.1979 Associate member of The Welding Institute, UK (TWI)
04 – 09.07.1983 Attended Basic Industrial Radiography course, Miri, Solus (M) Sdn.Bhd.
11– 15.07.1983 Attended Ultrasonic - Thickness and Lamination, Magnetic Particle Inspection course, Miri, Solus (M) Sdn.Bhd.
Since 1983 Member of the AMERICAN Society for Non-Desctructive Testing, INC (ASNT)
29-30.11.1985 Attended seminar on Radiation Safety Kuala Lumpur, Mediviron.
15-16.10.1985 Attended seminar on status and Propects of Non-Destructive Testing In Malaysia Industries, Kuala Lumpur, Unit Tenaga Nuklear, Jabatan Perdana Menteri.
21– 26.10.1985 Attended Kursus Perlindungan Sinaran untuk pekerja-pekerja sinaran, Bangi, Unit Tenaga Nuklear, Jabatan Perdana Menteri.

PERIOD/DURATION DESCRIPTION / DETAILS
Since 01.08.1985 Member of American Welding Society (AWS).
28.01 – 01.02.1992 Attended Introduction to ISO 9000 series Quality Management System and Documentation, Miri, Velosi / KKA.
07 – 14.03.1992 Attended Painting and Coating Inspection course, Miri, Velosi / KKA.
07-11.05.1992 Attended In-Services inspection of Process piping system - Petrochemical Industry course, Miri, Velosi / KKA.
04-08.09.1992 Attended Inspection and design Review of Boilers, Pressure Vessels and Heat Exchangers course, Miri, Velosi / KKA.
13-17.06.1995 Attended Ultrasonic Testing (ANST Level II) course, Labuan, Lott Inspection Sdn.Bhd.
01.07.1995 Attended Jotun Paints Seminar, Miri, Jotun (M) Sdn. Bhd. and Velosi (M) Sdn.Bhd.
02-03.09.1995 Attended Magnetic Particle Testing (ASNT Level II) course, Miri, Velosi (M) Sdn.Bhd.
08-09.09.1995 Attended Liquid Penetrant Testing (ANST-Level II) course, Miri, Velosi (M) Sdn.Bhd.
Since 15.11.1999 Ordinary member of Institute of MATERIALS, Malaysia (IMM)
11-22.01.2000 Attended ASNT Level II Magnetic Particles Testing course by Velosi (M) Sdn Bhd, Miri
31.01 – 11.02.2000 Attended ASNT Level II Penetrant Testing course by Velosi (M) Sdn Bhd, Miri
14.02 – 04.03.2000 Attended ASNT Level II Radiographic Testing course by Velosi (M) Sdn Bhd, Miri
23.06.2001 Attended Training Programme for CorrOcean Hydraulic Retriever Tool Double Isolation Valve
06-10.08.2002 Attended IRATA Level I Rope (Abseiling) Course
06-15.10.2003 Attended API 510 Inspector Certification Preparation Course
05.02.2004 Attended Technical Report Writing and Effective Presentation Skills by Curtin University of Technology
LANGUAGES:
WRITTEN SPOKEN
English Fluent Fluent
Bahasa Malaysia Fluent Fluent
Mandarin Fluent Fluent

References will be provided on request.

SUMMARY OF EXPERIENCE
Over 25 years of extensive experience in the oil and gas industry in:-* The field of Quality Control and Inspection of Materials, Weld Inspection, Blasting and Coating Inspection in the oil and gas related industries i.e. shop fabrication, plant maintenance, offshore hook-up and commission, offshore maintenance work complying to the safety standards, clients specification requirement and relevant code of practice.* Management of personnel and administrative staff.* Certification and condition assessment activities of both new and in-service equipment especially pressure vessels, air receivers, cylinders, lifting appliance boilers and other related machinery's.

EXPERIENCES:
Period/Duration Details / Description
Velosi (M) Sdn.Bhd.1st Oct. 1997 – Present Inspector Manager Seconded to Sarawak Shell Berhad / Sabah Shell Petroleum Co. for contract No. 589001 - Provision of Inspection Services. Scope of work include: -* Overall responsibility for smooth execution of inspection functions given under the scope of work. This include maintenance inspection, corrosion monitoring, vendor / quality audit services and statutory surveys. * Providing technical advice to the Contractor Representative and the Company as and when required basis. * Responsible to assist Contractor Representative for implement of Quality Management System. * Overall responsibility for technical analysis of inspection reports, planning of inspection activities, initiate details assessment on identified defects, resource allocation, review of vendor / quality audits reports and provide necessary expert opinions on technical and legal matters related to statutory surveys. * To effectively interface and communicate with Technology Manager to obtain information about new Technology and techniques related to inspection. Also to effectively liase with Operations Manager on aspects of manning, logistics and transfer of new technology / techniques.* Responsible to lead a team of experts and engineers for the implementation of Criticality Assessments on the onshore and offshore facilities operated by the Company.* Responsible for the development and implementation of inspection manual applicable to the scope of work based on criticality assessment and ratings of system / equipment operated by the Company. Also responsible for the development specific guidelines, instruction, plan and procedures pertaining to inspection. * Provide inputs for the development of project quality plan, overall inspection plan and scheduling of inspection activities and to keep updated copies of codes, standards, specification related to inspection functions given the scope of work.* Responsible for the issuance of progress reports, related to inspection activities and other administrative report as require under the scope of work. * Liaise closely with Operations Manager in the identification of the needs for training and courses (internal / external) to upgrade the competency of personnel. * Responsible to Liaise directly with Technology Manager for the identification of new techniques and effective inspection methods for the inspection with the intent of improvement with regard to cost saving without compromising on technical integrity of the facilities operated by the company. * Report directly to Contractor Representative. * Approved all inspection reports, advice, recommendation and results of defect assessments issued to the company.

Period/Duration Details / Description
Continue * Carry out regular safety audits at worksites.* PCML Yetagun 26.12.2003 – 06.01.2004Inspection of pressure vessels, cooler and heater* M1 Expansion Project: Relief Senior Welding Inspector from 12.10.2002 to 24.10.2002 onboard Sarku Samudera. Scope:- Welding inspection (SMAW – manual), MPI, DPI, coordinating all welding inspection and NDT activities on deck extension & bridge structure welding.* M1 Expansion Project: Relief Senior Inspector from 05.09.2002 to 14.09.2002 onboard DLB Kuroshio-1. Scope:- Monitoring on welding inspection (welding process: SMAW - manual), QC inspection and NDT on deck extension and vessels installation.* South Furious and Barton Field Project: Relief Senior Welding Inspector from 11.05.2001 to 18.05. 2001 on board DLB264. Scope:- QC Inspection, witness WQT & RT procedure, monitoring welding inspection (welding process: SMAW manual, GTAW manual) and NDT on SFJT - Jacket Installation.* M4/F23 Field Development Project: Relief Senior Welding Inspector from 22.09.2001 to 06.10.2001 on board DLB264. Scope:- Monitoring WQT, Bend tests, welding inspection (Welding process: SMAW manual, GTAW Manual, GMAW automatic, FCAW automatic), coating, QC inspection and NDT on pipeline laying, riser and J-Tube hook-up activities.* M4/F23 Field Development Project: Relief Senior Engineering Inspector from 28.10.2001 to 01.11.2001 at Bintulu site inspection of equipment, review SOW, procedure and /conduct kick - off meeting for pre-commissioning of pipeline.* M4/F23 Field Development Project: Relief Senior Engineering Inspector from 23.11.2001 to 30.11.2001 on board Sea Panther. Scope: monitoring pre-commissioning activities.
TUV Bayern (M) Sdn.Bhd September 1997 Engineer Surveyor Seconded to Petronas Carigali Sdn.Bhd. as a relief Engineer Surveyor for Contract No. 339209. Responsible to carry out inspection and certification of clients statutory items including cranes and pressure vessels.
Velosi (M) Sdn. Bhd15th May 1987 - 31st August 1997Senior Plant/ Welding Inspector and Senior Engineering Inspector Seconded to Sarawak Shell Berhad / Sabah Shell Petroleum Co. Contract No. 100030 / 587793: - Provision of Inspection Services for Routine Maintenance, Minor Construction and Category I and III Barges, based at Lutong Refinery as a Senior Engineering Inspector. Duties and Responsibilities:* Carry out statutory full inspection / interim on - stream inspection on statutory equipment such as pressure vessels, columns, coolers, condensers, heat exchangers, air receivers, dearators and pre-heater as per relevant specification such as API, ASME VIII, TEMA, BS5500. * To compile inspections report on statutory equipment for senior inspection Engineer to review prior to submission to DOSH for issuance of certificate of fitness. * Assist Lutong Refinery Senior Inspection Engineer during shutdown of Statutory equipment. * Full inspection of Lutong Refinery furnace F14, F21, F24 and ex-coalinga * Assist Third Party Inspection Surveyor to carry out full inspection on refinery boilers, dearators and pre-heaters.
Period/Duration Details / Description
Continue * Involved in the construction, erection and installation of Lutong Refinery flare stack, associated pipings and structure support.* Witnessing hydrostatic pressure testing on pressure vessels, coolers, air receivers, condenser, heat exchangers, furnace radiant tube and convention tube systems. * Witnessing Welding Procedure Qualification Test, Welding Qualification Test Mechanical Testing and prepared Procedures Qualification records.* Perform fracture and macro examinations and welder qualification test specimens as per ASME IX and AWS D1.1. * Inspection of Welding repairs / weld buttering on vessels, coolers, condensers and columns. * Radiographic film interpretation of radiant tube internal coke formation, corrosion / erosion and thickness measurements. * Perform Non-Destructive Testing such a colour contrast / fluorescent removable solvent dye penetrant inspection on carbon steel, steel alloy and aluminium alloy.* Carry out external and internal inspection on various type of above ground storage tanks inclusive of welding fixed cone roof tank. Floating roof tank and riveted roof tank.* Witnessing hydrotesting on tanks and performed vacuum and air testing of tank bottom plates.* Monitor / supervise minor construction / fabrication of pipings and structures for the following ;-Lutong Refinery and MCOT Tank Farm Projectü Lutong Refinery Gas Oil-Line Blending Project ü Lutong Refinery Bailey Bridge Project ü Erection / installation of new furnace F-14Carry out in service inspection for the followings:-Bailey Bridge ü Cooler and Condenser Platforms ü Lutong Refinery in-plot and off-plot process pipings and water lines.ü Pangkalan Loading Jetty Facility. * Inspection on welding repair of pumps and valves, using SMAW and torch brazing on cast iron, steel, brass alloy, aluminium alloy and steel alloy.* Perform materials inspection inclusive of pumps, pipings, valves fittings and etc. * Welding inspection on carbon steel / stainless steel using SMAW, GTAW as per specifications ANSI B31.1, AWS D1.1 SES and DEP. * Radiographic interpretation on welding of pipings and structures in accordance to ANSI B31.1, ASME VIII, ASME IX and AWS D1.1
Period/Duration Details / Description
Continue * Hydrostatic pressure testing, vacuum testing of SBM hoses and rubber hoses. * Valve testing inclusive of relief valve, ball valves, butterfly valves and etc. * Familiar with various type of inspection equipments such as USK 6, USK 7, T-MIKE, CYGNUS-2, ATG-100, Panametrics-26 MG, Magnaflux YM-5 and YM-6, Ardrox BCI 80, Vacuum Box.

1st March 1982 - 15th May 1997 (Solus (M) Sdn.Bhd.& Solus Oceaneering (M) Sdn.Bhd WORKSITESSenior Radiographer, Supervisor, Radiation Protection Officer Sarawak Shell Berhad (SSB / SSPC) Duties and Responsibilities:* Lutong Refinery shutdown, Installation of Refinery Furnace F24, Lutong Refinery dual relief valve interlocking system, Lutong Crude Oil Terminal revamp, Lutong Crude Oil Terminal firewater ring main, installation of foam riser system at Lutong and Bintulu crude oil terminal stabilization plant phase II, Sarawak and Sabah offshore platform shutdown, tie-ins and maintenance associated oil and gas production, transportation and process plant and equipment, hyperbaric welding of Samarang 8" trunkline repair, etc. * Radiographic inspection on fabrication pipelines of various sizes, vessel repairs, structural beams corrosion monitoring and thickness measurement of pipeline, blockage investigation of refinery pipeline, monitoring of coke deposit on the furnace tube, supervision of divers performing underwater radiography on hyperbaric welding of Samarang 8" trunkline repair. Interpretation of Radiographs to code such as ASME VIII, ASME IX, ANSI B31.3, ANSI B31.4, API 1104, API 650, AWS D1.1.* Radioactive source used: IR 192 between 12 to 25 curies. * Equipment used: Tech ops exposure device model 660 and control unit model 664, permanent magnet yoke, D-Meter DM2. * Co-ordinate and monitor radiographic inspection activities of 5 Radiographers 4 Assistant Radiographers and Darkroom Technician to ensure that radiographic procedures/ techniques are complied and quality radiographs are produced. * Ensure all radiography operations comply with the Malaysia Atomic Energy Licensing Act 1984 and Radiation Protection (Licensing) Regulations 1986. * Ensure that all radiographic testing equipment and facilities are calibrated and in good working conditions and consumables / processing chemicals are adequately stocked.* Monitor and keep record of radiographic personnels' film badge and dosimeter reading. * Compile and submit reports, time sheet and other documents as and when required by Sarawak Shell Berhad. Also administering 6 Ultrasonic Technicians / Welding Inspectors.
Period/Duration Details / Description
1st December 1981 - 28th February 1982Solus (M) Sdn Bhd. WORKSITES

Radiographer Sarawak Shell Berhad (SSB/SSPC)Duties and Responsibilities:* 2" Gas line to MDC dumping ground, 6" firewater line to Lutong Airstrip. Sarawak and Sabah Water offshore well tie-ins, replacement of refinery linework. Bintulu crude oil terminal stabilization plant phase I, installation of tank 3 at Labuan Crude oil terminal.* Radiographic inspection on fabrication of pipeline of various sizes. * Radiographic source used: IR 192 12-25 curies. * Equipment used: Tech ops exposure device model 660 and control unit model 664. * Carry out all radiographic work assigned in accordance with all applicable regulations and company manual, having due regard for own safety and safety of others. * Ensure quality radiographs are produced prior to submit with radiographic report to clients.
30th November 1979 - 30th November 1981Independent Testing Co. Sdn. Bhd WORKSITES Radiographer Sarawak Shell Berhad (SSB/SSPC)Duties and Responsibilities * Lutong Refinery shutdown, associated piping fabrication, column repairs Baram gas process plant, BCOT stabilization plant phase I. Sarawak and Sabah Water offshore platform shutdown, well tie-ins, wire line lubricators and associated piping fabrication. SJMT-F6" trunkline. Welding qualification test specimens, etc. * Radiographic inspection fabrication pipelines of various sizes, column repair, structural beams, piles. * Radioactive Source Used: IR 192 12-25 curies. * Equipment USED: Bix torch type, Gammax. * Carry out all radiographic work assigned in accordance with all applicable regulation and company manual, having due regard for own safety of others. * Ensure quality radiographs are produced prior to submit with radiographic report to client.

Period/Duration Details / Description
23rd October 1977 - 29th November 1979Independent Testing Co. Sdn.Bhd. WORKSITE: Radiographer / NDT Technician Spencer (M) Sdn.Bhd.Duties and Responsibilities: * Fabrication of offshore structural jackets, platforms for SSB and SSPC, fabricated by Brown and Root (M) Sdn.Bhd, Ex-Brown and Root Yard in Labuan. * Radiographic inspection of structural jackets legs, braces, conductors, platform structural I-beam s and pipelines. Magnetic particle inspection and dye penetrant testing on weldments of jackets braces, jacket and platform tie-down braces. * Radiographic Source Used: IR 192 12-25 curies. * Equipment Used: Bix torch type, penetrant magnetic yokes, hand held electromagnetic yoke. * Carry out radiographic inspection, magnetic particle inspection and dye penetrant inspection and submit report after inspection.

1st June 1977 - 22nd October 1977 Independent Testing Co. Sdn.Bhd. WORKSITESNDT Technician, General Inspector Petaling Tin Co. CCM Co., Carlsberg Co., Kuan Cheng Foundry, Singapore. Petroleum Co., Penang Turf Club, Malayan Titinium Co. Humes Industry, Watson (S.E.A).Duties and Responsibilities:* Radiography on degree buckets, aluminium storage tank, structural beams, pipelines, visual inspection on drums, pipe fittings, ultrasonic thickness measurement on pipeline, magnetic particle inspection on structural beams welding. Hydrostatic pressure testing on casted pipe joints. * Radiographic Sourced Used: IR 192 5-10 curies, Co. 60 2 curies. * Equipment Used: Bix torch type, metchell exposure device, X-ray unit, permanent magnet yokes, krautramer ultrasonic flaw detector USK-5. * Submit every inspection report to Area Manager for approval priors submit to the client.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 7051)

Go to Search Parameters...

Brief Description

Offshore Rig Safety & Training Coordinator.

Drilling high angle & horizontal wells, H2S, perform injection & production completion, well testing. Experienced in directional drilling, dealing w/ anti-collision, etc.

Innovative career in the field of electrical power engineering: Installation, Service and Commissioning

electrician

A total of 6 years of industrial experience which includes 2 years of production & commissioning experience in an Indian Refinery and 4 years of Advanced Process Control experience with Honeywell India & Aspen Tech Middle East.

AN EXPERIENCED BOILER AND PIPELINE DESIGN ENGINEER

EXPERIENCED PETROLEUM ENGINEER and PMP (PROJECT MANAGER), DEEP OFFSHORE, DRILLING, COMPLETIONS, SUBSEA EQUIPMENT AND CONNECTORS

Safety and Risk Researcher

I am Civil Structural Engineer having detail engineering and design experience of Oil & Gas industries. I have done my BS in Civil Engineering. I got exposure in the design of Civil & Structural components of Oil & Gas Plants.

Completed MS and BSc in Geology. Working in the Geological Survey of Bangladesh as an Assistant Geologist on 18 February 2007. My duties is to make Geological Reports, Geological Mapping, Environmental Observation, Identifying the Hazardous zones, River and Shore line Erosion observation

Project Manager with 19 years of hands on Experience of Executing Green field projects of Hydro & Pyrometallurgy- Zinc, lead & Copper, Cu SX & EW, Cobalt SX &EW, Leaching & Flotation plant, Copper Smelter. Transmission lines, HT & LT motors upto 7700KW, VVVF upto 5MW, Hot & Wet ESP's.

Over 17 Years of professional experience in Piping, Basic & Detail engineering of Offshore(FPSO, FPU & Wellheads), Onshore Refineries, Petrochemical plants, Oil field developments, Fertilizers, Chamical, Process and industrial plants of various types with excellent knowledge in Industry standards

Lead/Senior Instrument Designer 13years experiance with PDS Intools & programming skills. Intools ADministrator. SPI 2007 Administrator. Smartplant Intools Administrator

Diploma in Mechanical Engg & Having 10 years experience as a Piping Designer / Draftsman in OIL & Gas field

Sound technical knowledge of broad range of electrical transmission & distribution products, excellent knowledge of preparation of tenders and contract management, Good experience in EHV Turnkey Projects with Proven success record into complex environments

API 653 Qualified Inspector having experience in Static Equipment Inspection

Well Stimulation Engineer

Pre-Comms. Rep/Witness for Umbilicals , Subsea Controls/hydraulics

GIS Analyst

I am technically sounded professional having design, Construction, Erection & commissioning engineering experience in Field instrumentation & Systems. I have exposure in various industries like hydrocarbon industry, Power Plant industry, etc. I look for a suitable position in a design engineering or

Instrument and Fire ans gas Maintenance

Experienced Instrumentation and Control Engineer with extensive knowledge in PLC, SCADA, RTU and Network programming, Engineering Schematic development, Troubleshooting, Project commissioning and latest Industry standards.

Petroleum Engineer, I have three years of experience in the Oil Industry, specifically in Petroleum of Venezuela (PDVSA) as Production optimization Engineer and thermal engineer (Alternate and continuous Steam injection), Experience on wells, producing under artificial

Expert to work with ORCAFLEX ,ORCALAY,OFFPIPE,AGA Software - Able to work with CAESAR II,SAGE Profile,MOSES,AUTOPIPE,MATHCAD - Worked with DNV 1981,DNV 1996,DNV 1998 (Guideline No. 14),DNV 2000 (OS F101),DNV RP B401,DNV PR F103,DNV RP E305,DNV RP F105,DNV RP F107,BS 8010, BS 7910, API 5L, ASME B31.8

Mud Engineer (senior) experienced motivated ready to relocate works anywhere

Geoscientist, Senior reservoir modeller. Geostatistician. Scientific software developer

Over Eight years experience in the field of Quality Assurance and Quality Control services. Have performed inspections in the fields of Oil-Refinery, Petro chemical plant, Power plants, Structural Steel Fabrication shops, Flow line construction.

Extensive work experience and proficiency in the area of PLC,SCADA,HMI, Industrial Communication driver development/networking and Field instruments in a carrier spanning of 10+ years of experience in the sector of Oil & Gas, Water and Waste water treatment, Power, Pharmaceuticals, Chemicals, Packag

• Bachelor of Engineering in Mechanical from Bharathidasan University Nov-99

HSE Supervisor/ DP operator/ HLO/ Chief officer

University of Oil and Gas – Ploiesti, Engineer 2003;- BOSIET OPITO & H2S Induction - Survival Course in Malta at International Safety Training Center- with degree and personal safety logbook valid until Nov. 2008, Specialized certification course in “Programming annalist” – Windows, dBase, Fox

Checker/Sr. Piping Designer having a very good exposure in Piping layouts for Oil and Gas , Refineries and petrochemical plants, checking of Isometrics, MTO, Piping layouts, good working experience in PDS Desinn review.

* Membership in ASET and with work experience in instrumentation and control systems field. * Familiar with field instrumentation and industrial control system. * Experience in multiple loop control systems, PLC, DCS, SCADA systems * Fluent in computer and AutoCAD drawing skills.

A professionally qualified and technically competent Data Management Analyst, with 14 years experience in Well log Data Processing and Petrophysical Data Management.

To receive a laboratory, Technical, Analysis or Research position working in the Petroleum and/or Oil Field.

I am having Bachelor Degree of Mechanical Engineering certificate. I have 7 years experience in Qa/Qc field and 10 years experience in production field. And also I have completed the AWS-CWI,NDE Level II.

Piping design, pipe supports, project coordination. 25 years experience in petrochem industry. Autocad, word, excel, office. Motivated and available.

Over 25 years of experience in the oil and gas industry in: Quality Control and Inspection of Materials, Weld Inspection, Blasting and Coating .Management of personnel and administrative staff. Certification and condition assessment activities of both new and in-service equipment.

HSE specialist with chemical/process engineering background seeking environmental or HSE role within the oil/ gas and construction industries.

Please find below my details of experience for Estimation Engineer Position. I am a diploma mechanical engineer and keen in excelling in my career with hard work and accepting higher responsibilities.

Senior Pipelines Engineer with 16 years experience with International Consultancies.

Senior Training Officer, Mechanical with 17 years of extensive knowledge and experience in all aspects of technical training. Planned, developed, designed, conducted, mechanical training programs following the approved Competence Development Programs, ensuring mechanical fitters, tradesmen and techn

Engineering, Design, Installation, Commissioning, Programming, Management, Consultancy & Upgrades etc., for all types of Instrumentation & Communication Projects for Oil & gas Industry, Paints, Refinery, Petrochemical and Glass. Preparation of Design Basis Scoping, Functional Specifications Document

Procurement Engineer with 14year Exp. in Oil/Gas/Engineering Industry, Qualification Diploma in Fabriction Engineering

Oil & Gas Production Chemistry, Chemical Engineering, Corrosion Engineer, Process Optimisation, Production Chemicals Optimisation, Corrosion/Scale Prevention/Inspection, Process and Environment Monitoring, Well testing/completion design, Process design/waste water management, Extensive field experie

I am an innovative thinker with a demonstrated ability to improve production and decrease down time. I am very adaptable to changing projects and work schedules and have a proven ability to quickly train on different facilities. I have excellent planning and organizational skills

Degree in Electronics & Instrumentation with 6 years of experience in Engineering and Projects, Trained by various Instrumentation Vendors, Hands On experience in SCADA & PLC Systems, Field instrumentation, Vibration monitoring system (SKF), witnessed FAT for Electrical and Instrumentation Packages.

Mechanical/process/system completion commissioning and handing over

PHDWin, Field Direct, PA, Petra, OFM, MS programs, AS400, Wellcore, Webcore

PDMS Administration involving Teams, Users, Dbs,MDB. Access control rights and Roles management,Clash Manager Administration.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out