Resume - Considerable expertise in dealing with corrosion control of oil and gas installa...

Misco Jobs

Resume #46429

CONTACT INFORMATION:
View contact information...

1. JOB OBJECTIVE:
Senior position in corrosion and protection consultancy, troubleshooting or research and development in oil and gas industry.

2. EDUCATION:
1976 to 1984: Master of Science (M.Sc) and/or Doctor of Philosophy (Ph.D) in Corrosion Engineering, University of Manchester Institute of Science and Technology (U.M.I.S.T), United Kingdom.

1972 to 1975: Bachelor of Science (B.Sc) in Biophysical Sciences, University of
Houston, USA.

3. EMPLOYMENT HISTORY:
2001 to Present: Senior Corrosion Engineer, Kuwait Santa Fe for Engineering &
Petroleum Projects Company, Kuwait (Seconded to Kuwait Oil
Company, 2001-2005).

1997 to 2001: Biocide Consultant, Imperial Chemical Industries (I.C.I), United Kingdom.

1995 to 1996: Corrosion Research Consultant, Faculty of Technology, Tehran
University, Tehran, Iran.

1987 to 1994: Corrosion Research Consultant, Petroleum Industry Research
Institute, National Iranian Oil Company (N.I.O.C), Tehran, Iran.

1984 to 1986: Corrosion Consultant, Bina Consulting Engineers, Tehran, Iran.

1978 to 1983: Research Assistant, Microbial Corrosion Laboratory, Corrosion and
Protection Centre, U.M.I.S.T, United Kingdom.

4. TECHNICAL SKILLS:
Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream (exploration, development and production of crude oil and natural gas), midstream (pipeline transportation and storage of crude oil and natural gas) and downstream (crude oil refining, petrochemicals production, distribution of oil products and natural gas) activities in oil and gas industry. Some of the technical skills are categorized as follows:

4.1 General:
- Corrosion testing, monitoring, failure analysis and troubleshooting.

- Corrosion and protection of metallic systems; control methods for internal surfaces in various environments (materials selection, alteration of environment by using inhibitors as well as oxygen scavengers and biocide chemicals, linings, cathodic protection) and external surfaces in soil and water (coatings, cathodic protection).

- Corrosion control of installations at every stage of oil production, from initial extraction of primary production and secondary recovery to refining and storage prior to use.

4.2 Specific:
- Field monitoring and control of the primary corrosive agents found in oilfield installations (carbon dioxide, hydrogen sulfide, dissolved oxygen, sulfate-reducing bacteria).

- Control of microbial activity and souring problems in oilfield water handling systems and reservoirs.

- Development of laboratory systems to assess biocide performance against sessile (surface-attaching) bacteria in biofilms.

- Development of efficacious oilfield and water treatment biocides and corrosion inhibitor chemicals.

- Laboratory and field evaluation of coatings for underground applications.

- Cathodic protection of steel structures internal surfaces (pipelines, surface and elevated water storage tanks; condensers and heat exchangers; processing tanks and vessels, etc.) and external surfaces (onshore oil well casings, underground and submerged oil and gas pipeline systems, underground fuel/oil tanks; on-grade storage tank bottoms, offshore oil-drilling rigs, etc.)

- Cathodic protection criteria assessment and standardization of underground steel structures by correction of field monitoring potential measurement errors.

- Effect of bacteria on cathodic protection and coating disbondment of underground metallic pipelines.

- Innovative approach to biocorrosion by utilizing the destructive effects of corrosive bacteria to develop microbial batteries.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 6396)

Go to Search Parameters...

Brief Description

Drilling Engineer / Foreman (onshore)with 14 years field supervisory experience and 5 years engineering/planning experience.

1. 16 years of experience & 14 years as Licensed Engineer. 2. Problems Solver with high standards of quality. 3.

Drilling supervisor with 19 yrs of experience on land rigs exploratory, development, workover , horizontal, multilateral wells available . Excellent communication skills, result oriented, get after it attitude, hard working , safe approach, overseas experienced. IWCF valid. References on request.

i can all design for instrument Offshore & Onshore

Electrical Engineer, QA/QC Engineer, Pre-commissioning Engineer

Foreman/Mechanic in the feild of Diesel generator,I T I Fitter, 25 Year Experience

I am familiar with EPC design practices and adaptable to the development and change management of works in progress, right from feed stage through detailed engineering till upgrading and expansion / revamp, within the specified limits of scope of work and beyond my defined role of functions, from co

Piping Engineer with 14 years of expereince

BTech Electrical , 11 years exp in Refinery, Petrochemicals, Oil & Gas Plants

Middle to senior level assignments in plant maintenance, machine utilization & Control with an organization of repute.

I am chemist in oil industry

Drilling Engineering Advisor with over 20 years experience at various positions in drilling, including over 15 years international experience. Have experience as mud engineer, drilling fluids supv, drilling engineer, rigsite drlg supervisor, drlg superintendent and drlg project manager.

i have diploma engr in mech engg. having 18 years expr. of maintanance of processand power plant equipment

I am B.E. (Electronics & Communication) with 10 yrs. exp. as a QA/QC Engg in Oil & Gas Plants, Power Plants, Fertilizer Plants, Sea Water Plants in OMAN, K.S.A, UAE,QATAR with ARAMCO, PDO, DEWA, QAFCO and i am aprroved QC Engg & Inspector in instrumentation and Telecommunication

I am looking for a job in the marine sector. I have worked on board Tankers, OBOs, Bulkers and Container ships. I am an ex cadet of Bangladesh Marine Academy, Ctg. I did an Advanced Diploma in Marine Engineering from Singapore Polytechnic. I also hold a Singaporean Class 1 COC.

Dedicated professional with 18+ years of experience in • Installation & service of Electrical submersible Pumps at onshore and offshore drilling rigs

11 years on instrumentation chemical and petrochemical plant, maily handle EMERSON DeltaV/Honeywell TDC3000/FF instrument

Sincere and hardworking with good communication and interpersonal skill looking for some challenging assignment

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

7-year offshore structural engineer with M.S degree

Design Engineer, Project Engineer, AutoCAD designer

Maintenance Engineer (rolling mills)

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

I have attained 17 plus years of field technical service in the Oil Refining, Petrochemical, & Refrigerations fields. I wish to utilize this experience, for advancement of my career, with a successful minded firm.

Estimation Engineer - Instrumentation.

Chemical Engineer with 11 years of experience in Project Engineering & Management in Chemical, Petrochemical, Refinery & Oil & Gas sectors.

Performing work as per international standards following operational excellence management system

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

•Experienced in sizing of process equipments •Experienced in using process simulation HYSYS, Pipeflo and Flarenet softwares• Expert in preparing process documents/drawings i.e.PFD’s and Data sheets•Familiar with ASME/ANSI codes, ASTM and API standards

I am diploma engr in mech. engg. having 18 years expr. in maint. of process plnat equipment

Experienced Chemical/Process Engineer (over 9 yrs experience). Petroleum refining, Liquefied natural gas (LNG) production and gas processing, process design, Offshore oil and gas platform deisgn (topsides), process simulations (Hysys), conceptual process design, detailed process design, Training.

Senior Structural Engineer with 12 years experience in offshore structural engineering. Able to lead, forecast and allocate structural engineering resources and possesses conceptual to detailed design experiences in brown and green field projects.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Proficient in Accident/Incident Reporting and Investigation, HAZOP, HAZID, Risk Assessment (JSA), Implemented and periodical measurement of HSEMS Program; Provided assistance and advise to plant management, supervision and employees on HSE matters; WHMIS, Hazardous Waste Management

Maintenance experience for oil& gas field in 10 years

10 years of combined experience in Cost Engineering/Control, Quantity Surveying & Field Engineering in Oil & Gas projects, Heavy industries, Manufacturing and civil works/infrastructure project. Eight (8) years of which were spent overseas in Oil & Gas and Manufacturing sector.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out