Resume - A professionally qualified Engineer and Maintenance Specialist, with a total com...

Misco Jobs

Resume #4647

CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

Professional Qualifications: Instrumentation City and Guilds 225; Part II and Part III.
Instrumentation City and Guilds 275; Part II and Part III
Instrumentation City and Guilds PLC Part I

WORK EXPERIENCE

Mar 2002-Dec-2003
Instrumentation Chargehand
Suir Eng, Mooncoin, Waterford.
I was employed by the above in a multi million pound contract to install and commission a validated MCS system for Wyeth Medica Biopharma Campus in Clondalkin Co. Dublin. Duties included:
* Spec checking and calibration of all Drug Product instruments.
* Over seen the installation of all Drug Product MCS instrumentation.
* Responsible for cold loop checking on all systems prior to hand over and compiling of system hand over dossiers
* Involved with system walk downs with ICV and Wyeths.
* Responsible for hot loop checking and commissioning of validated and non validated HVAC and
Facilities systems.
* Tested and commissioned Allen Bradley PLC system applications using GE Fanuc Cimplicity SCADA system.

Apr 1999-Mar 2002
Instrumentation Technician
Lotus Automation, Finisklin Industrial Estate, Sligo.
With Lotus Automation I was contracted to various companies and projects throughout the country. This included:
* Contract position in Calibrations Laboratory in Intel Ireland.
* Contract position in Engineering and Maintenance Department in Guinness Ireland.
* Contract panel building for Mayo County Council.
Responsibilities and duties in these contracts included:
* Calibration of field and process instruments including Pressure, Flow, Temperature, Humidity, Level, Turbidity, pH and Conductivity instruments.
* Loop-checking and fault-finding for different control loops.
* Upgrading of Siemens S5 PLC's to Siemens S7 PLC's in Guinness.
* Redline, update and verification of electrical drawings.
* Building control panels to specified wiring diagrams.

Feb 1998- Apr 1999
Apprentice Instrumentation Technician
Mercury Electrical Engineering, Sandyford Industrial Estate, Foxrock, Dublin 18
While employed by Mercury Electrical Engineering I was contracted as a member of the Calibration Team into the following companies:
* Xerox Ireland (Greenfield site) and
* Intel Ireland.
Responsibilities and duties in these companies included:
* Installation of electrical cables.
* Checking specification ranges and calibration of field and process instruments.
* Loop-checking and fault-finding for different control loops.

June 1997 to Feb 1998
Apprentice Electrician
Iarnrod Eireann, Amien Street, Dublin 1.
Duties included:
* General maintenance and overhaul of locomotive motors under supervision of qualified electrician.
* General maintenance of locomotive electrical circuits.
* Planned and corrective electrical maintenance of railway infrastructure.

OTHER INFORMATION
* Trained and efficient on DELTA V systems
* Worked to ISO 9000 and 9002 quality standards.
* Trained and efficient in cleanroom working standards and procedures.
* Proficient in working to stringent site safety standards.
* Trained in FAS Safe Pass course.
* Attended Mitsubishi PLC training course.
* Attended Siemens PLC training course.
* Holder of ECDL; examinations passed in March 2000.
* Full Drivers License.

INTERESTS AND HOBBIES
* Include football, swimming, computers, reading, cinema and socialising.

REFEREES
Referees available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1851 to 1900 of 6635)

Go to Search Parameters...

Brief Description

Cathodic protection engineer with 7 years exp. with every aspect of C.P,Well versed with NACE and other Interntional and Industry specific stds

Pipeline engineer and Stress analyst (CAESAR II)

Worked as Rotating Equipment Engineer for various types of rotating equipments for refineries, petrochemical and nickel-mining plants in compliance with the project specifications, clients’ requirements and international codes and standards. Field engineering works during construction stage related

I am Junior Piping Designer with PDMS skill

My experience include but not are not limited to ensuring and maintaining healthy, incident and injury-free environment, as well as implementing the company’s safety policies and procedures.

Hse speciality

I am 32 years old, male, married, a university graduated on Offshore Engineering Dept. of ITS (Sepuluh Nopember institute of Technology) Surabaya. I have been working at some Batam shipyards since 2001. Presently, I am working as Project/Piping Engineer. Additionally, I’ve some computer skills.

MS Degree drilling engineer with 4 years of experience in oil and gas industry. A motivated person with good team work skills and experience in multi-national projects and environment. Looking for position of Night Drilling Supervisor or Wellsite Drilling Engineer on/off

BE in Mechanical Engr

A Safety Engineer working at Dolphin Energy Ltd.

Geophysicist

Instrumentaion and control system enigineer with DCS experince

Mechanical engineer, autocad, offpipe, microsoft

Process Engineer

PDMS piping designer with 8 years practical experience

I am having 11+ years of experience in Structural Detailing, checking. Major experience is in Oil & gas, Offshore sector. Knowledge of Autocad, PDS.

Well qualified 3rd class Engineer with 2 years marine experience in offshore. Motivated, hard working, responsible, reliable and productive, proven ability to deliver high quality of work and excellent shipowner satisfaction. Looking for permanent job for leap forward engineering mind.

Mechanical engineer in oil and gas sector

Specialized in Corrosion & Materials Technology, Failure analysis, Quality control and Project Management

Electronics Engineer with 7.75 years of exp. in installation, testing, commissioning and troubleshooting of Satellite communication equipments and Vessel Traffic Management Systems which includes Radar Systems, AIS, VHF Systems, Hyd/ Met. Stations, etc

Civil engineer with 17 years experience

Corrosion Engineer with extensive knowlede in the area of materials selection for chemical and water processing industries.

Technical Sales manager - Electrical Engineering

Caterpillar field service engineer

To participate in periodical inspection and testing of all static equipment of process plants and pipelines to analyse the condition of the equipment.

Executive Mechanical at Megasteel Sdn Bhd under repair and maintenance, As Mechanical Engineer at Stagno Tech Sdn Bhd aslo under repair and maintenance Banting, Selangor

Senior Inspector, CSWIP 3,2 + RAD. Interpretation

Exposed in several construction company involved in Engineering Procurement Installation Commissioning and Build Operate Transfer type of Contract at Oil & Gas, Petrochemical and Power Plants. In addition to that I’ve been in the Operation and Maintenance a couple of years at the Refinery and Petroc

Self-motivated & hard-working Drilling Superintendent / Company Man with a vast experience spread over 29 years in well reputed National & International E&P Companies.

Certification as a machinist, supervisor, Engineer, & licensed teacher + 25 years in 16 countries machine service centers (GE, Sulzer), supervise overseas workshops (Badak LNG), start-up & commissioning, chemical plants field supervisor (Dow, Mobay) trouble shooter B&R, GE

Senior buyer with more than 20 years exposure to both the on- and offshore oil and gas / petrochem sectors and has executed materials / procurement activities for a number of world-wide projects during various project phases.

Underbalanced Drilling, UB Drilling, Air Drilling, OHSE Managment, Operations Manager Drilling Consultant, Toolpusher

Drilling Fluids Cementing Logistics Marketing Management

Cost Engineer

I am a qualified Mechanical Fitter and Turner with twenty years extensive experience. I am booked to complete an Offshore Survival & Fire Fighting Course from 16 Aug until 20 Aug 2004.

I am an electrical engineer, I have 14 years experience in industrial projects mainly in steel industry and oil & gas industries, I have gained valuable experience in design, procurement and construction of electrical systems, I am familiar with MS office and electrical analysis software Etap.

I am an electrical engineer, I have 14 years experience in industrial projects, I am looking for a job in United Arab Emirates.

I'm a Senior CSWIP 3.2 and Radiographic Interpreter 3.4 holder. Having more than Twenty years of experienced in Oil & Gas construction and Inspection work, both Structural or Piping in Onshore and Offshore. Familiarized with various Welding Processes and relevant Code & Standard.

20 years experience in the industry and PDMS user since 1997. Extensive experience in PDMS 3D Design and 2D Draft producing engineering and fabrication drawings for a wide range of projects in the following countries: France, USA, Norway, Holland and UK. Experience in AutoCAD and Microstation.

Played as a Coordinator / senior to executed various turnkey EPC Projects incl HVAC system Rich Experience in the Project Management and coordinate to finalise Basic Design, Basic Engineering, Detailed Engineering with Process Engg.

Date of Birth 19 Octobre 1951 Nationality British/Turkish (double nationality) Current Position Beicip Franlab Associate Reservoir Management Consultant

Twenty years experience in global recruitment of oil & gas people: sound knowledge of engineering skills required for design, fabrication, construction, commissioning of FPSOs, LNG trains, offshore platforms, petrochemical plants and refineries.

Maintenance Supervisor/ Superintendent

maintenance electrician moving to Alberta Canada requiring career opportunities

Senior Piping Designer

I am interested in domestic or international employment in the oil and gas industry. Please see resume for an overview of my qualifications.

A professionally qualified Engineer and Maintenance Specialist, with a total commitment to excellent performance, combining experience that encompasses a broad range of technical, training and management disciplines as well as practical, 'hands-on' involvement.

29 years experience in offshore pipeline project engineering, procurement, offshore construction & commissioning in North Sea & SE Asia. Includes pipelines, risers, tie-in spools, manifolds, umbilical, shore approaches, testing, de-watering, air & vacuum drying & nitrogen purging & gassing up.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

Qualified Mechanical & Marine Engineer with 20 years oil field maintenance experience. 6 years as Mechanical Supervisor on Production Platform. Production operations experience, high pressure/high temperature wells. Overseas experience. Qualified crane operator and many other offshore courses.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 [ 38 ] 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out