Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #4665 next resume »»
CONTACT INFORMATION:
View contact information...

DATE OF BIRTH: 10th June 1976
AGE: 27
MARITAL STATUS: Single
NATIONALITY: British

QUALIFICATIONS: BEng (Hons) Chemical Engineering (1994-1998)
University of Edinburgh

PROFESSIONAL BODIES: AMIChemE
COMPUTER SKILLS: Experienced in HYSYS, Pro II & Pro-Vision, PIPESIM and ESI process simulation packages.
Familiar with the HTFS TASC, ACX & ACOL heat exchanger rating program.
Dynamic anlysis using OLGA.

COURSES ATTENDED: Gas Conditioning and Processing (Campbell)
Control and Operation of Centrifugal Gas Compressors
Eutech Pressure Relief – a proven approach (IChemE)
MAPS – Offshore Safety and Emergency (Shell)
RGIT - Offshore Safety & Emergency Training Course
TRACS – introduction to Petroleum Economics

EMPLOYMENT HISTORY:

Genesis Oil & Gas Consultants May-01 – Present
Occidental of Oman May'03 – Sept'03
Talisman Buchan Alpha Offshore PIE Feb'02-Sep'02

Flow Assurance
Conoco UK Ltd – Brittania Satellite Project
Dynamic analysis of subsea tieback pipeline system for transportation of three phase fluids from a new field 28 km back to the Britannia platform. Investigation of cool down, thermal insulation requirements, start-up of gas cap were considered. Operability of the system and flow assurance in terms of potential for slugging during normal operation and ramp up were assessed along with terrain induced slugging mitigation techniques.

ExxonMobil - Nevis Central Flow Assurance Study
Transient Analysis of the new NCL well tied back to the Beryl 'B' platform. Analysis considered: Steady state operation of the flowline, shutdown & cool down, well ramp-up following an extended shutdown, slugging potential and mitigation.

BP - Forties Echo Subsea solution
Performed a series of steady state (PIPESIM) simulations for a subsea tieback to the Forties Alpha platform. The analysis assessed the sensitivity to gas lift rates, well location, minimum insulation. The study was then taken further to dynamically determine the slugging profile of the well(s). The production separator capacity was determined and assessed for the new well slugging requirements.

Shell - NAM Field Development Study
Thermal and hydraulic review of new subsea flowline transporting a subsea tieback to existing facilities.

CSO/SOEKOR - Sable Flow Assurance Study
Initial sizing and thermo-hydraulic analysis (PIPESIM) of the production, water injection and gas lift flowlines to and from a Bluewater FPSO offshore South Africa.

Operations Support
Talisman - Buchan Under-balanced Drilling Production Interface Engineer
The P.I.E was responsible for managing the interface between coil tubing drilling activities and production. This project was a world first. This offshore post required: Attendance and contribution to interface risk assessments during the planning phase, verification of newly installed circulation system prior to commissioning and co-ordination of the commissioning phase, Training of project personnel both onshore and offshore to ensure their understanding of interface procedures before commencement of project activities. Development of specific procedures when unplanned well operations required further flexibility.

BP CATS - Enhanced NGL Operation
Development and implementation of test procedures to operate the CATS terminal in enhanced NGL mode. Site engineer during the initial E-NGL trial period. Main responsibilities included close liaison with ops team, technical query interface and data recording/analysis.
Responsible for implementing a change in the operation of the heating medium system that released an additional 5MW of usable heat energy for the terminal.

BP Magnus - Revenue Improvement Exercise
Process Engineer for a Genesis initiated study into the re-optimisation of a North Sea platform. Responsible for remodelling the NGL plant (Turbo-expander) at off-design conditions. Performed assessment of the 4 stage compression train - compressors, scrubbers and inter coolers. Delivered conceptual report to client.

Detailed Design
Occidental of Oman - Northern Oman Gas Expansion Project
Process Engineer seconded to the NOGP engineering team in Muscat, Oman. The main objective of the NOGP was to monetise the stranded associated gas at the Safah, Wadi Latham and Al Barakah fields. A consequential benefit would be a drastic reduction in gas flaring at these sites.
As the process engineer in a multi discipline team I was responsible for the Glycol Dehydration and Refrigeration/Dew pointing packages. This involved equipment specification, vendor liaison, technical bid evaluation, package integration into the existing facilities and design & HAZOP reviews of the package. Due to the fast track nature of the project (project kick-off to first gas was 8 months) the project required close liaison with the package vendors.

Process Simulation / Plant Capacity Studies
AGIP - Hydrocarbon Allocation Review
Process Engineer responsible for allocation review of the Agip Balmoral facilities.

Mobil - SAGE Plant Capacity Study
Responsible for assessing available ullage within the gas processing train for the potential introduction of third party business. Duties included modification of plant simulation model, equipment capacity rating and introduction of excel link to HYSYS in order to model expander-compressor 'off-design' performance.
Performed a series of HYSYS simulations to model the SAGE/STE plant performance at increased gas throughputs.

AGIP - Kashagan Offshore Production Train Study
Process Engineer responsible for a sensitivity and optimisation review of a new production train to be installed in the Caspian Sea offshore Kazakhstan.

BP - Magnus EOR Pipeline
Hydraulic review of ullage within the EOR pipeline. The study concentrated on the introduction of 3rd party gas at a number of different sources within the system.

BP – Andrew topside capacity study for Cyrus tie-back
Review of topside capacity to aid in commercial decisions to tieback new subsea development.

Brown & Root Production Services
Shell Central ISC - Central North Sea Aug'00 – May'01
Conoco Partnering Project Oct'98 – Aug'00
Shell Anasuria FPSO – Operations Support
Responsible for screening ad-hoc offshore queries for seawater pipework (conifer) leakage, living quarters sewage system failure, plant instrumentation queries, swivel leakage.

Shell – Anasuria Sand breakthrough study
Responsible for Anasuria subsea & topside erosion study. Duties included: Liaison with external sand modelling consultants (AEA), identification and analysis of sand mitigation options for late field life, report generation including input to asset integrity program.

Conoco SNS – LOGGS Level control upgrade
Process Engineer responsible for the conceptual study and detailed design of a new level control scheme for several 3-phase separators. Responsible for investigation of all possible level measurement devices at conceptual stage. Complied FEED report making recommendations for the proposed level control scheme for each separator. Vendor liaison during conceptual stages to assess equipment suitability. Design work included preparation of PFD, P&IDs and Instrument datasheets, capacity review of separators, liquid outlet line sizing check.

Conoco SNS – Viking Safety case and well isolation procedures
Responsible for updating the Safety Case for two wellhead satellites. Reviewed change screen reports over four-year period. Took ownership of the documents and co-ordinated discipline input to relevant sections of "Installation Description". Interfaced with compliance body (DNV). Preparation of isolation procedures for wellhead satellites prior to and during simultaneous drilling operations. Start-up procedures for new side-tracked wells being brought on-line after work over period.

Conoco SNS – CMS Air-Cooler Operating envelopes
Process engineer responsible for CMS compression train air-cooler development study. Project work included: Heat Exchangers simulations on ACOL, Production of Interstage and Export Fin-Fan operating envelopes and validation of coolers for increased gas flowrates.

Conoco SNS – Viking BC2 Refurbishment
Front-end study into refurbishing of mothballed compression train BC2. Responsible for: HYSYS / HYSIM simulation of compression train, equipment list, Investigation into possibility of refurbishing LP vane pack scrubber for new flow profile (achieved). Performed compressor capacity study over 15 year flow profile using vendor-supplied compressor curves to identify future train bottlenecks.

General
Secretary for several HAZOP's including: Shell Halley subsea tieback, Viking ED sand management system, Viking BC2 compression train reinstatement, CMS compressor water wash. As-building of project P&IDs for a wellhead compression module (Viking ED). Offshore liaison with the vendor representative's involved with the leak-testing of the compression system prior to start-up. Responsible for trouble-shooting leak testing problems.

Sedco-Forex, Schlumberger
Maersk Vinlander – Northern North Sea Jul 96 – Oct 96
Offshore Roustabout. First hand use of the Permit to Work and STOP Safety program. Duties included: valve testing, fire extinguisher certification, painting and general maintenance work.

Sperry-Sun Drilling Services, Aberdeen
Formation/Evaluation Assistant Jun 94 – Oct 94
Summer job in the FE department. Helped with F/E tool maintenance, electronics testing & data retrieval, new tool-build and joint certification.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 4201 to 4250 of 6635)Go to Search Parameters...
Brief Description
AutoCAD
Site Safety
I'm a reservoir engineer working for rashpetco(JV.of BG&EGPC)for the following topics:runing eclipse 100 simulation,kappa saphir wt analysis,prosper nodal analsis,mbal(MB software),gap(netwark),floviz,reservoir coupling,office,pvti,schudule,pss,petrel ,controlling the multi segmented wells
I am Engineer, MBA, Speak 4 languages, Excellent Computer Knowledge, I have done several courses in the Petroleum Industry. I've worked in a Shell Petroleum Refinery in the Engineering Area, Inspection, Maintenance, and Projects. Also in Economy of the Refinery working on the MIS and KPIs.
I am a Petroleum Engineer that possesses technical expertise in petroleum economics evaluation, and reservoir engineering analysis with some reserves booking experience. In addition, I am very eloquent with Microsoft's office software and all windows environments.
Cuban Petroleum Engineer looking for work.
As a Manager/Project Manager, I have over 12 years of experience managing various design build projects and services business in OEM, Pipeline and Water treatment industry
Executes design preparation and construction drawings of piping system and supports and pipeline design. Background demonstrates intensive exposure in conceptual design and studies, detailed designs, cadd drafting, isometric and general plan reviews, & MTO
Solid management experience in professional Procurement (purchasing, quality control and logistics)
Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm
I am a chemical engineer with 15 year experienced in oil, gas processing and petrochemical plants (Polyethylene-LLDPE/HDPE/LDPE). Extensive experience in gas separation, purification, refrigeration, all type of compressors. Day to day activities of production plant and catalyst manufacturing.
7 years experience in the oil filed, (Mudlogger, Data engineer and a pressure engineer)
The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder being associated with the Onshore – Offshore Oil & Gas Plant industry. Experience has been gained in all aspects of Engineering Piping Design & drafting activities with the emphasize on piping plan, isometric, pipe spoo
Ten Years Of Effective Managerial/Sales Experience At The Professional Level
I am in a position to take full and independent charge of major plant overhauls related to boiler and its auxiliaries, intake equipment, fuel gas station and fuel oil handling station
Electrical Technician/Cell Phone Technician
Project Management
Electrical Engineer - Design and Estimation
Oil and Gas Drilling Professional
Inspection of Oil & Gas, Refinery, Petrochemical plant and offshore field Static equipments, Welding, piping, pipelines, painting& coating and NDT.
• Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles
Eight - year experience in Civil Engineering Projects.
Dynamic Supervisor for Oil and Gas plus Engineering in the Pipe Fitting and Boiler making industry
13 years of work experience in offshore as an Electrical and Instrument Technician on an FPSO oil installation. 10 years of work exerience on Gas Refinery in Saudi Arabia as an Instrument Technician. 3 years of work experience as an Instrument Man in Chemical Plant.
2 year of Subsea pipeline design experience and 2 years of post-graduate Research & Development experience in Hydraulics, Costal and Maritime related area.
ABB Thailand 3 Year ABB Industry Singapore 3 year Raywins Engineering Solution 6 Month at present time
Health and Safety Engineer. Well qualified for the position of Health, Safety and Environmental Manager in the Oil and Gas Industry. Ten years of senior experience as a Health and Safety Engineer.
Degree in Mechanical Engineering / Mechatronics from Jordan university of science and technology. Main experience: installation of surface wellhead equipment. Previous experience: coiled tubing operations. Courses mainly in the oil & gas industry.
Techno-commercial back ground , working as senior inst. engr in a petrochemical plant in the capacity of deptt. head. Having a experience of around 7 years in steel,agro and petrochemical plant. B.E. (Instrumentation) + MBA(marketing)
Strong structural engineering knowledge, Energetic, Good analytical thinking, Self motivated, Hardworking, Dedicated person, Able to work under pressure.
Process Engineer with 6 years professional engineering experience in offshore oil&gas industry on fixed & floating installations and gas terminals. Experience covers Conceptual and detailed design of equipment, debottlenecking studies, process simulation, plant modifications & Flow Assurance
Controls Engineer with work experience ranging from coal and gas power plants (4.5 years) to oil refineries (1.5 years).
BE Electronics, Project Engineering in Oil, Petrochemical (Hydrocarbon) fields for YOKOGAWA DCS, FGS/ESD (Prosafe RS PLC) Systems
Master degree, Structural, Civil, Staad Pro, SAP, STRAP, Strucad, Autocad, leadership, project management
Corrosion engineer
B-GAS LEVEL II PAINTING INSPECTOR.MORE THEN 15 YEAR EXPERIENCE IN INSPECTION FIELD.
Inspection in Welding and Fabrication in Oil And Gas Industry, Mechanical Engineering
Safety Engineer, (NEBOSH) Lifting & Rigging Supervisor, (NVQ 3.)
Have working experience in 6 countries; around 15 years of experience in Project Management, Project Engineering, Engineering Design, R&D, Construction, Technology Management and Business Development. Have extensive experience in subsea/offshore pipeline, cross-
Highly accomplished, self motivated and performance driven young professional
Automation, Motor controls, and Programmable Logic Controls
Estimating Engineering for Oil & Gas Projects from FEED to EPC stage.
FPSO management include, technical, operational as well budgeting.
B.Tech in Electronics & Instrumentation, working on under water hydrographic equipments
Looking for a MWD career
Design / Project engineer: Control & Automation - food & automotive industry
Qatar Petroleum
Over Three & half years experience in System Administration, Network Administration & System Management in Multinational Software Company & Industry. Good interpersonal skills, ability to work well and hard with multidisciplinary teams, got maximum exposure in MS Windows Systems Administration
Like learning something new. Almost 4 years experience in oil&gas and pharmaceuthical device company. Familiar with standards API, GPSA, ASME, NFPA, and program Hysys, Pipesim, Pipephase, Chemcad, Flaresim.
BS of Petroleum Engineer, with a Waterflooding Postgraduate of 2 years, I work with Ecplise and Grid, I made my own project by my own.
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   83   84   [ 85 ]   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com