Resume - HSE Officer

Misco Jobs

Resume #46790

CONTACT INFORMATION:
View contact information...

Officer HSE
Experience From June 2005 Till date Nocil Navi Mumbai ( QMS,EMS,OHSAS certified ) Maharashtra India
Executive Safety
Job Profile:

1. Incident Investigation- Notification, Investigation, Root cause analysis & mitigation of the cause with contributory factor. Also includes elimination of at risk behavior (OSHA). This includes Indian standards for various Govt. bodies.

2. Process Safety Management / hazard Assessment- Experience on Hazop, JSA, What-if- analysis, FTA, Risk assessment.

3. Safety System & Hazard Control-Hands on experience is SOS (Safety observation system), JSA, HWP (Hazardous Work Permit), LOTO (Lock out Tag out), CSE (Confined space entry), Crisis management, Behavioral based safety, Emergency management. Prepared & updated On-Site plan, Safety manual, SOP's.

4. Training – Certification and re-Certification training for all safety related issues. Completed trainers training programme in HSE from CLI. Attended 03 days course Introduction to EMS, ISO 14001 conducted by TQMI. Completed training in occupational Health & Safety Management System OHSAS 18001. Completed First-Aid course from St. John Ambulance Mumbai. Completed internal auditor training for ISO 9001:2000 & ISO 14001.

5. Product Stewardship & Transport- Develop and implement loading & unloading procedures for both packed & bulk quantity of various chemicals (98% Sulphuric acid, Oleum, Aliphatic amines, Methanol, Ethanol, Toluene, Xylene, Acetone, Aniline, Cs2, PnCB, Chlorine, Ammonia, Hydrogen, H2S etc.) Pre trip inspection, Trucking compliance as per Central Motor Vehicles Rules 1989, SMPV, Gas Cylinder Rules 2004 & Petroleum Rules. Fleet management with respect to safe delivery of product by identifying and conducting 03 days statutory training to drivers carrying hazardous chemicals as per CMVR.

6. Fire Prevention- Planning and implementation of active and passive fire prevention systems. Executing projects with hands on experience in automatic medium velocity water spray system, Hydrant system Deluge system, Portable fire extinguishers, Flammable gas detection, Toxic gas detection, Oxygen deficiency & enrichment detection as per International Standards (NFPA). Also liaisoning with fire insurance company & local fire brigades.

7. Liaisoning- Managed CCOE, DISH, MPCB, CPCB and many other Govt. & local bodies for project approval & other relevant compliance's hands on experience in preparation of Environment Statement, Cess reports, Stack analysis, Effluent & waste analysis reports.

From July 2003- May 2005 Alkyl Amines Chemicals Ltd Patalganga ( QMS,EMS,OHSAS certified ) Maharashtra India
Executive Fire & Safety
Jan 2002 –June 2003 Coastal Marines Ltd Mumbai Maharashtra India
Assistant Manager HSE
Job Profile:
1. Worked in Onshore & Offshore projects. Completed successfully SHELL Hazira Port & LNG Terminal project (Hazira-Surat)

2. Preparation of safety manual, Emergency plan, conducting Tool-Box talk, Fire, First-Aid, Man over board, Fire drills on barge. Specially awarded an appreciation letter by SHELL EHS Manager.

June 1996 – Jan 2002 The Dharamsi Morarji Ambarnath
Chemicals Ltd Maharashtra India
( QMS,EMS certified )
Safety Officer
Job Profile:

1. Organizing various safety activities such as Safety Inspection, Central safety committee, Dept. Safety Committee Meetings.
2. Organizing various safety awareness programmes such as celebration pf National safety day, Environment day and Fire service day.
3. Ensuring availability and quality of Personal Protective Equipment through the purchase departments.

Aug 1994 – May 1996 National Rayon & Chemicals Ltd
Mohone Maharashtra India
1. Worked in Chloro Caustic Project in erection, commissioning and in prod. Dept., DCS system (Yokogawa micro excel)
Educational. & Professional Qualification

Advanced Diploma in Industrial Safety Dec1999 Maharashtra Board of Technical Education.

Diploma in Chemical Engineering May 1994.
Maharashtra Board of Technical Education.

Diploma in Industrial Management from
Welingkar Institute of Management Mumbai.

Diploma in Computer Application.

Completed Medallion level First-Aid course from St. John Ambulance Thane.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 6543)

Go to Search Parameters...

Brief Description

Corrosion Engineer with 5 years of experiance in DownStream Oil and Gas

Over 8 (Eight) years of experience in Construction Welding Inspection, painting Inspection,NDT, QualityControl/Qality Assurance, surveillance, execution, co-ordination,hydro testing and destructive testing in the field of refineries,petro chemicals, fabrication yards and offshore platforms.

6 years exp in piping design engg field

I have been working infield of structural Design since last Eight years-using modern technologies and software. I done RCC , Steel & Precast Structures in commercial, residential & industrial Area

M.Sc. Geologist, looking for a job in oil industry

Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments

Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)

Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits

Analysis Estimation-Officer 10 years as operations engineer in power plant

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

PDS, CADWorx, Rebis AutoPlant

HSE Officer

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

I hold a Bachelors Degreein Petroleum Engineering. I also have a 2 year hands on Rig experience with Transocean and 4 year LWD Engineering with Major companies.

I graduated from the University of Oklahoma, USA (Msc Petroleum Engineering), I have been working for the Algerian oil company SONATRACH as a Reservoir Engineer since Feb 2005. I can assure you that I am reliable and hardworking, ambitious and highly motivated individual

15 years in the Canadian Oil and Gas Industry, I have a well rounded understanding and knowledge of the industry. I have worked as a mud engineer providing technical service to the Western Canadian Foot Hills region. Have a great understanding of oil base fluids, water based and advanced Gel/Chem

Junior Well SIte Geologist, Junior Pore Pressure Engineer

6 years experience in Drilling Rigs,shipping &Oil & Gas field as a Piping Designer.

chemical engineer with 6 years experience on oil and gas production platform in Persian Gulf, commissioning and start up alongside with SHELL company

Automation engineer

Experienced, skilled, self-motivated, petroleum geologist with strong 2-D/3-D seismic interpretation and prospect generation background in South Louisiana and South Texas. Team player with strong workstation skills and ability to provide quality interpretations. Seeks a position to work on diverse

Petroleum Engineer with almost 6 years Experience

Senior Chemical Engineer - professional with more than 20 years work experience in Oil refineries-execution, running and shutdowns, Industrial projects, Construction, Manufacturing, Water treatment plants, Projects management, QC/QA Management, Internal auditing and latterly specialist Educator

Simulation Engineer

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

Project Engineer / Manager

Petroleum Engineer with experience in Chemical Treatment.

I graduated from Technology Industry School in 1988. I worked for PT Arun LNG.Co. for 11 year since Nov.1989 to March 2001. I have been working for Qatar Petroleum as Senior Laboratory Techinician since March 2001 to present.

vender inspection, Inspection of internal & external coating for steel pipes, pipe fabrication (LSAW&HSAW), NDT methods witness(RT,UT,MPT & LPT).

A good worker, I do my best.

I would like to inform you that I (RAVI KUMAR PALLELA, S/o RUDRAYYA) completed my degree in B.E (Production) discipline with 70.3% in First Class with Distinction from Swami Ramanand Theerth Marathwada University, Nanded in the year 1999. I Have More than 6 ½ Years experience in CAD/CAM area.

Highly qualified in 3D modeling and design as well as control and instrumentation

Worked as marine engineer, certification from Uk, maintenance and operation of machinery

Having more than 12 yrs experience in safety field. Ready to accept any new challange. could able to work any pressure environment.

I am Mechanical/Pipeline Engineer working in the Oil and Gas Industry for more than a decade now.

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

Senior process engineer O&G; 19yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Area of expertise is ranging from Preliminary and Details Design, Construction

Design Engineer (Piping & Stress Analysis), Mechanical Engineering

9 years in Pipeline Engineering, Project Management/Engineering Co-ordination for Conceptual, Bid & detailed design / engineering, & construction, Analysis and Design of RCC & STEEL Structures.

• Field Instrumentation Eng,PLC ,DCS RS3 rosemount oil and gas 7years

A well experienced senior level QA/QC Engineer, Welding/Coating inspector

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out