Resume - Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. B...

Misco Jobs

Resume #46944

CONTACT INFORMATION:
View contact information...

Male, 43 years old, energetic, self starter, and creative. Bachelor Degree in Chemical Engineering. I have been sixteen years working for PT. Caltex Pacific Indonesia, a Chevron -Texaco afiliates company in Indonesia.

I have been exposed to many Petroleum Engineering functions for eleven years. It covered Chemical Engineering, Production Engineering, Completion, and Reservoir Engineering. Light and heavy oil crude field type. Many innovations I made during this assignment. One if it was Innovative Cementing Technique for Duri Steam Flood Project which saved more than Eight Millions US Dollars (US$8,000,000.00).

From technology point of view, I have been exposed to Water Flood, Steam Flood, and Polymeer - Surfactant Flood. My last position in Petroleum Engineering was Special Project Petroleum Engineer for Tertiary Pilot Projects of Minas Light Oil Steam Flood and Polymer - Surfactant Food.

For the other five years I have assumed many coordinating & management function like Quality Management Coordinator, Leadership Program Facilitator, Six Sigma Program Facilitator, and Operation Excellent Champion.

Objective:

Looking for Senior Engineer or Managerial position which will enable me giving more provit to Share Holder.

EXPERIENCE:

* 1988 – 1989: Chemical Engineer. PT. Clatex Pacific Indonesia, Riau.

I responsible to select best chemicals for new start-up Duri Steam Flood Project.
It covered oil and water treating processes for both surface and down hole treatment.

I introduced a method and lead a team to chemically clean up radian tube section of steam generators in DSF Are-3 (about 50 units). This project was successfully double the efficiency of all generators. Safe fuel, higher Steam Quality, which lead to higher oil production.

* 1989 – 1997: Petroleum engineer. PT. Clatex Pacific Indonesia, Riau.

I have been exposed for Production Engineering, Well Completion Engineering (4.5 years), and Reservoir Engineering jobs for Duri Steam Flood Project.

Many innovations I made when I was on this assignment, i.e.:

I Introduced standard programs for simple workovers, so that Assistant Engineer could take these kind of jobs. Therefore Engineer could focus on the bigger workover programs.

I redesigned screen liner configuration for both cased hole and open hole producer well completion. It resulted cost saving from reducing blank casing above liner, and significantly improved gravel packing quality. Cost saving for 2 years operation was US$ 500,000.00

I lead Cementing Team who lain down methods for Micro Matrix Cement and G cement for Steam Zone Shut off, G- Cement Liner Damage Repair, etc. Steam zone shut off itself saved US$ 8,000,000.00 (Eight Millions US Dollars).

I introduced Potassium Chloride as a tracer to detect steam eruption sources in DSF. It was cheap, safe, simple and accurate.

I initiated Steam Injection Shut Off programs as part of DSF Area-6 and Area-5 reservoir management strategy. It saved fuel and in the same time increased oil production for total about 600 BOPD.

* 1997 – 1999: Special Project Petroleum engineer. PT. Clatex Pacific Indonesia, Riau.

I designed and implemented production strategy for Light Oil Steam Flood, and Surfactant Flood Pilot Projects in Minas Field.

I found out the way, and lead the execution team who was successfully perforating producers casing which attached fiber optic cable in it.

* 1999 – 2002: Quality Management Coordinator & Corporate Facilitator for Leadership & Six Sigma Programs. PT. Caltex Pacific Indonesia, Riau.

As part of a team I was successfully deploy Total Quality Management concepts through out the company.

I facilitated five Six Sigma projects, which come from technical and services department.

I also facilitated Enlighten Leadership programs for 441 leaders.

* 2002 – 2004: Operation Excellence Champion. PT. Caltex Pacific Indonesia, Riau.

As a part of a team I was successfully develop Operation Excellence training material, and deploy Operation Excellence Concepts through out the company.

* 2004 – 2006: Sr. Consultant for Leadership & Performance Improvement Management. PT. Rizky Samudra Pratama, Bandung.

I helped an oil company to improve its bottom line by synchronizing its Strategic Objectives from top executives down to grass root level, set up Key Improvement Initiatives, Success Measurement Tools, as well as the monitoring and reward programs.

EDUCATION & TRAINING:

1988: Bachelor Degree from Chemical Engineering Department of Gadjah Mada University, Jogjakarta.

1988 – 2001: Many Petroleum Engineering trainings such as Advance Formation Damage Assessment & Control Strategies, Reservoir Management Practices and Techniques, Quality Control for Completion and Workovers, Practical Reservoir Simulation, and others; They came from many sources. Mostly came from overseas.

1988: Business Process & Procedures (BPP) Train The Trainer, from Chevron, USA.

1999: Enlighten Leadership Train The Trainer, Enlighten Leadership International, USA

1999: Value Engineering Train The Trainer, from Chevron, USA.

2000: Six Sigma Green Belt, Six Sigma Bleck Belt, and Six Sigma Train The Trainer, from US Air Academy Associates, USA

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 6635)

Go to Search Parameters...

Brief Description

Petrophysicist Formation evaluation, Production log processing and interpretation, Geologist- Basin Modelling, LWD, MWD, mud logging, Geological interpretation of well logs, data management, Production geology. Interpretation and evaluation of well logs ranging from exploration to production and rea

Experience of over 20 years to serve you to the best of my ability without any supervision.i have HND in electrical engin. and Diploma in Computer technology from recognised university from my country.I have worked in different fields including UN mission .

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

Degree in electronic engineering in the next December, however now I am electronic technologic with 14 years of experience in the petroleum industry

MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.

Application for the post of Piping Designer / Mech. Draughtsman

Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

10 years of extensive experience in planning/maintenance (CMMS) and Engineering in Petrochemical Process Industry, mainly in the Ethylene Plant and Oil and Gas Industry

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Piping /Supervisor/ Superintendent Site Manager. City and Guilds I Basic, II Pipe work, III Advanced Piping, 1970 TO 1975, Northern Counties, Engineering Craft Studies, Level 3 Pipe Fitting, 1970 to 1975 Time served (1970-1975 Emanuel Spence Pipe Services

Experience in design with Engineering Consultancy and EPC Firms in Refinery, Oil & Gas Pipeline projects, Power projects, Substation projects in India, Middle East, Africa and Canada.

Drilling Foreman (Drilling Supervisor) I have 30+ years drilling experience, which includes working as a rig worker, Mud Engineer, and Drilling Foreman.

I am a Petroleum Engineer of 14 years of oil and gas experience I have broad based skill that spread into financial and management and Reservoir modeling,seismic interpretation,seismic inversion ,great marketing skill.I have created a niche for myself in directional surveying in Nigeria.

ELECTRICAL ENGINEER WITH MORE THAN 14 YEARS EXPERIENCE

An Inspection / Static Equipment Integrity Engineer with 14 years experience in oil and gas industry.

Available for International Consulting. Strong Field drilling and completion experience. Can become re-certified in a short time frame.

Fifteen years of experience in the field of Design Engineering in the areas of Onshore/Offshore facilities and Petrochemical Plants. Experienced with various computer aided system platform/ design software (3d & 2d) such as MicroStation, AutoCAD , PDS, PDMS, PSDS, OrthoGen, SPR and SPI.

Welding Inspector and Inspection Engineer

Procurement Manager for 1. Projects, 2. Services, 3. Transactional, 4. Contracts, 5. Materials Management (For Oil/Gas, Petrochemical, Shipping, Semiconductor, Manufacturing, Trading), Multi skilled level.

Wide experience leading project engineer assignments working with design/engineering teams in the supervision, development and preparation of engineering and construction documents and drawings.

NAME:JOHN GOODDY

Master Electrician \ Instrument Tech \ PLC Programmer

Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.

MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations

Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.

I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level

Operations wellsite geologist for HPHT,Deepwater and Extended reach drilling with Geosteering and Pore pressure nalysis

Static Equipment Mechanical Engineer

Mechanical Engineer; Static Equipment

Workshop mechanic to TRS Departement to Weatherford oil tool Algeria: JSA Training ; Risk Assessment Training; EEP Cetificate; Basic First Aid Training ; Fire Marshal Training ; Stab Master Sistem Training

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Geotechnical Field Rep

I am an Instrumentation and Electrical Supervisor/ Technician with significant experience in Maintenance and HUC in the Oil & Gas and Petrochemical Industries.

I have 12 years experience in oil and gas field

Well Services Supervisor 30+ years in the patch

My job expertise is in the field of technical and non-technical training for automotive and heavy equipment. I conduct trainings for repair and maintenance of vehicles systems and instrumentation. As a Trainng Head / Instructor I also manage the whole training operation in my department.

i can work alone and do maintenance job safely

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

Design Instrumentation Engineer in the Field of Oil and Gas, Petroleum, Petro chemicals and Power Generation

Surveying, Global Positioning System, Land Seismic, Management, Crew logistics planning, Training, Borehole Seismic, GIS, Remote Sensing, Seismic experience in Swamp/Land/TZ/Desert, G-Gun, Gun Controller (TGS-8, GCU-4)

Reservoir or Production Engineer

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out