Resume - I have BCs of process (Chemical) Engineering with five years expoerince in oil &...

Misco Jobs

Resume #47133

CONTACT INFORMATION:
View contact information...

EDUCATION:
Degree: Bachelor of Chemical Engineering
Year of Graduation: 2000
University: Al-Baath University-Syria

COURSES:
A) Company Name: Cement Factory, Homs, Syria
Contact Person: Dr. Eng. Yaser Sa'adeh
Activities: Worked in the production processes in the factory
Period: From 01/07/1997 to 15/07/1997

B) Company Name: Sugar & Integrated Industries Company, Cairo/ Aseout University, Egypt
Contact Person: Prof. Abdulmoiz Esmael, University Vice President
Activities: Participated water treatment activities in the water treatment department, and the production process of the sugar industry Period: From 01/07/1998 to 01/08/1998

C) University Name: Institute of Chemical Technology, Prague, Czech Republic
Contact Person: Dr. Vlastimil Fila, Department of Inorganic Technology
Activities: Preparation and testing of Zeolitic Catalysts for Methane Aromatization
Period: From 25/06/1999 to 31/08/1999

GRADUATION PROJECT
A) Project Title: Processing of Phosphate using HCL
Location: The General Company of Fertilizer, Homs/Syria Contact Person: Dr. Issam Ibrahim
Activities: Studying the optimum conditions of treatment of phosphate using HCl. Worked as a student researching the optimum
Conditions of phosphate treatment using HCl which are beneficial for fertilizers industry. This research was under the supervision of Dr. Issam Ibrahim with cooperation with General Company of Fertilizers.
Period: From 01/09/1999 to 30/06/2000

WORK HISTORY:
Total years of experience: 6 Years
Years of experience in K. S. A.: 6 Years
Years of experience of Saudi Aramco: 5 Years

1. Employer Name: Clough/Zuhair Fayez Partnership Consultants
From: 04/01/2005 To: Present
Location: Al-Khobar, K.S.A
Position: Process Engineer.
Duties: Preparation of the Process Flow Diagrams, Piping and Instruments Diagrams, and performing calculations of the Sulfur Recovery Units in Uthmaniyah Gas Plant, Shedgum Gas Plant., and TEG plant in Abqaiq plants.

2. Employer Name: Zuhair Fayez Partnership Consultants
From: 07/01/2003 To: 03/31/05
Location: Al-Khobar, K.S.A
Position: Process Engineer.
Duties: Preparation of the Process Flow Diagrams of the HVAC system in Yanbu Refinery laboratory.
- Preparation of the Piping and Instrumentation Diagrams, Process Flow Diagrams, Doing heat & material balance using the process simulation software HYSYS, and PRO II for the Reverse Osmosis Plant in Abqaiq Plants.
- Working on Updating the Safety Instructions Sheets of Rabigh Refinery.

2. Employer Name: Nalco Saudi Company Limited –Aramco Contractor.
From: 05/01/2001 To: 07/01/2003
Location: Jeddah/Riyadh – K.S.A
Position: Application Engineer
Duties: Representing Nalco in Riyadh Refinery as an application engineer in the water treatment facilities.

COMPUTER EXPERIENCE:
1. Microsoft Window
2. Ms Office
3. Microsoft C++ Programming Language

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3301 to 3350 of 6396)

Go to Search Parameters...

Brief Description

Mechanic specialist

Welding Inspection, QA/QC Documentation, Pipeline construction, Fabrication and Installation

Nearly Eight years of Professional work experience in Project Management / Customer Services, of which Six years in Project Planning and Execution.

Over 8 years in the field of detailed engineering of Piping systems, which comprises preparation of plot plans, equipment layouts, piping layouts

Electrotehnical diploma, Operator computer license, Help programmator Fox-Pro license

Stress Engineer Proficient inNastran,Ansys, Ideas,NISa (Finite Element analysis software),C++,C,Visual Basic, Fortran etc

Working as an Engineer in the Instrument Maintenance Section of Karnaphuli Fertilizer Company (KAFCO), Bangladesh since October 2002 with all kinds of instruments such as transmitters, controllers, PLC, DCS, etc.B.Sc.Engg (Electrical & Electronic Engineering) from Bangladesh University of Engineerin

Effective planning and organizational skills including interacting with people, from upper management through hourly workers at various technical levels.

Multi-skilled, highly motivated and tenacious candidate with extensive skills in advanced drilling techniques, drilling engineering, production technology, well completions and workovers, reservoir engineering, team work and analytical and research competencies, developed through group seminar prese

i am engineer in chemical engineering and i have 6 years experience in crude oil treatement and 01year in gas treatement ,i am supervisor

8 + years experience in Instrumentation and Control, DCS field equipments (Yokogawa DCS & Field instruments). Good Knowledge on DCS, Pressure, Temp, Flow and Level devices, Control valves, analyzers and euipments. Additional Fieldbus Knowledge.

SH&E and Loss Prevention Engineer, provide services to exploration drilling, transportation and other facilities. Acts as advisor to Field Operation Manager on SH&E issues. The services are Site & Facility Audits, Fire Protection, Hazard Identification, Risk Assessment and the implementation of Op

Seeking a quality environment where my knowledge can be shared and enriched. Searching for a better opportunity where I can implement my expertise, programming skills, project management skills and administrative skills.

I am not very sure what a resume summary should say. This resume will tell you that I am a motivated individual willing to get into the engineering field. If you have any questions please let me know.

B.Tech in Mech Engg

B.E(mechanial) with skill of autoCAD and CATIA looking for freshers job

POWER SYSTEM DESIGN

20 years experience in DCS, SCADA, Controls, Commissioning, Design and engineering worldwide

I have BCs of process (Chemical) Engineering with five years expoerince in oil & gas plants design.

Piping field and desginer, project engineer coordinator /hdpe expert

Experienced Oil & Gas Project HSE advisor with QA/QC background. Excellent communication and writing skills, highly capable with languages and graphic presentations. Successeful in onshore & offshore construction projects in America, Europe, Africa and Asia.

To act as engineer of reservoirs, petrophysics or drilling, in oil or gas reservoirs. To generate the biggest added value to the Company contributing with effective and highly profitable solutions.

B.E(Petroleum) 4-year degree program.

workover & completion supervisor and now working as workover & completion superintendent

I am a qualified IMCA ROV Pilot Technician who has undergone training as a ROV Pilot Technician at IDESS Maritime Centre (Subic), Inc.Philippine and the 3 in 1 Electronic/ Hydraulic/ High Voltage Course at Miralco Foundation Institute Philippine.

i have 9 month experience in plc , scada. In company where i am working

I have done my B.E Electronics from a reputable university of pakistan.I have worked on PLC programming,Motor Control,Scada&DCS,Mcroprocessor&Microcontroller.In communication field Digital signal processing & Cisco networking are the field of interest.

Dedicated and disciplined, self motivated, good inter-personal relationship and team player. Ability to plan and realize set objectives, Quick learning skills, highly adaptable and service minded.

In May, I will be a graduate of the #1 ranked Petroleum Program in the nation. My numerous skills and accomplishments will aid me greatly within this exciting industry. In addition, my passion for business/economics has encouraged me to pursue a business foundations degree.

Safety co-ordinator in one of the world reknowned MNC M/s Owens Corning india ltd. Engaged in implementing safety policies, conducting departmental meetings on safety as per the countries regulation. Preparing safety audit report for top management.

I have installed, serviced, maintained, repaired centrifugal and reciprocating compressors, turbines, pumps, blowers and drivers.

Welding / Piping Inspector having more than 12 years experiance in oil & gas Field.

B E Mechanical Having 10 plus years of experience in Manufacturung, Production, Maintenance, Installation & commissioning, Inspection & Testing of CDP Fabricated Parts of Industrial M/c.

Naval Architect with 10 years experience in Inspection, QA/QC,ISO 9000,Project Management,General Administration in Marine,Oil & Gas Industry in the United Arab Emirates.

Simulation, Calculations for PSV, HE, Separator , HYSIS and Design II

CAD: Microstation V 8,Microstation 95 (ver 05.05.01.65), Microstation SE (ver 05.07.00.25),Microstation/J (ver 07.01.01.36), I/RAS B (ver 06.00I/RAS C (ver 08.00),Descartes (ver 6.0)Autocad

I have three year diploma of mechanical technology. Two year apprenticeship in rotating equipment from FFC fertilizer plant pakistan and 06 year experience in petrochemical plant of rotating and static equipments.

Instrument Design System i.e. INTools DCS Specification/Configuration Contracts and Budgetary Management Installation engineering/Commissioning Maintenance engineering, procedures and fault diagnostics

AutoCAD Designer - Architectural/Structural: Specialist for 2D/Advanced 3D Modeling & Rendering w/ AutoCAD 2007, 2D/Advanced surface & 3D Modeling w/ Mechanical Desktop 2005; Planning and Scheduling w/ Primavera Project Planner, User of Windows XP and NT + Microsoft Office applications

Piping supervisor (fibrication,construction,test package reviewing , witness for pressure test with the consultant) i speak two language (english and italian) and i have 27 years of experiences

14 YRS EXPERIENCE IN OIL & GAS FIELD IN INSTUMENTATION.

Seismic adquisition, oil data management, geology, mining management

My name is RAJENDRA T CHAVDA, I am INSTRUMENT TECHNICIAN, I have working exp. in this field more then 7.5 years. before i was working Russia and Abu bhabi (OFF SHORE) and India chem. and petro. chem Being given to understand from reliable sourse that thei

Supervisor, Quality, Process, wastewater

Instrument and Electronics Technician

SCADA Engineer

I am graduated in Petroleum &Gas engineering and have total experience in drilling engg & Drilling technology, such as Drilling engineer, Night Pusher & Night Company man.

13 years experience in the field of QA/QC, inspection, NDT, welding, painting, ISO, mech. equipments etc.

Chemical Engineer, PGDBM, Advanced Process Control Engineer (RMPCT,SMOC/RQE), DCS(Yokogawa CS3000, Yokogawa Centum XL, Honeywell TDC3000), Process Simulation

To take all the assignments as a challenge in order to uplift and maintain the goodwill. Dignity and growth of the concern that providing me knowledge, experience and growth of my career.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 [ 67 ] 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out