Resume - I have a 3 year Diploma in Mechanical Engineering and Vibration Analysis I, II, ...

Misco Jobs

Resume #47171

CONTACT INFORMATION:
View contact information...

OBJECTIVE
I'm looking for a role in which I can apply my technical skills and my "hands on" capabilities enjoying different day to day tasks, getting the job done effectively and efficiently with a key focus on customer service and deliverables as set out by my superiors.

PERSONAL STRENGTHS
I learn quickly adapting to new working environments.
I am more than capable of managing stress, to ensure optimum performance under pressure.
My decision making process always include both risk to operating personal as well as cost to production.
Well organized, innovative and self motivated.
I always demonstrate a positive outlook, maintaining a "can do" attitude in the face of obstacles.
Have the ability to work without direct supervision.
I am a friendly person with a good sense of humour.

QUALIFICATIONS
Standard 10 Exemption (Senior School Year)
Mangosuthu Technikon
Mechanical Engineering Diploma awarded by the Department of Education and Culture.
Vibration Institute of South Africa
Successfully completed level 1, 2 and 3 vibration analysis.

INTERESTS
Soccer, kick boxing, and outdoor activities

CAREER PROFILE
Group Five LTD July 1997 - November 2002
Maintenance Technician.

Engen Refinery LTD December 2002 - to date
I became a condition monitoring trainee technician and established myself as a condition monitoring technician. During this time my key responsibility was to accurately predict rotating equipment failures thereby increasing the overall reliability of the lube oil plant within the facility. My secondary role was to support the rotating workshop and operations team with root cause failure analysis, assist with repair work scopes, scheduling of equipment for repairs and produce documented monthly failure indicators to maintain an accurate failure history. I was also tasked with the reduction of bad acting equipment and in this regard our team proved successful as we helped reduce the number of bad actors from 14 to 2.

I joined the reliability department where I continued my role as a condition monitoring technician but with added responsibilities. The most significant of these added responsibilities was to assist my area team drive thru to completion new refinery wide reliability initiatives to further increase the reliability and reduction in operating maintenance costs.

WORKING EXPERIENCE
Seven years working experience on all aspects of Rotating Equipment and refining operating processes for onshore applications within the petroleum industry. These include witness testing, inspections, commissioning, start up, maintenance and technical services. This involved troubleshooting, condition monitoring, vibration analysis, oil analysis (tribology), root cause failure analysis, field balancing (limited experience), mechanical seal failure analysis, overhauls, scheduling of maintenance outages and routine monitoring of both centrifugal and reciprocating compressors, steam turbines, boiler feed water pumps, both horizontal and vertical pumps, fans and gearboxes. Conversant with machine alignment, pump cavitations, compressor surge and stone wall, rotor dynamics, critical speed analysis as well as oil whirl and whip. I am familiar with API standards and various other operating systems such as ISO 14000 etc. I have been extensively involved with mechanical seal vendors (Performance Plus) and local motor repair vendors. I have a working knowledge with the following operating systems: Microsoft Office, SAP, Honeywell TDC viewer and PHD (process history detail) uniformance.

PERSONAL STATEMENT
My strong work ethic and attention to detail will prove extremely valuable as I am a responsible individual who is eager to learn and face each new challenge with a positive mind set.

Employment References
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3751 to 3800 of 6396)

Go to Search Parameters...

Brief Description

Over thirty-five years experience in electric power utility equipment, SCADA, metering, telecommunications plus project management and international engineering from South America, Europe and Africa.

Skills: Foreign Languages. English (mid level)

To put my best possible efforts by applying my professional qualification and expertise in order to enhance the image of the organization in which I am working.A challenging position requiring creative and innovative approach to Oil industry , Quality control of sales oil, Crude oil process, Laborat

SKILLED / EXPERIENCED I & C TECHNICIAN, SEEK APPROPRIATE OPENINGS AS LEAD TECHNICIAN/SUPERVISOR

I have a 3 year Diploma in Mechanical Engineering and Vibration Analysis I, II, III and interative vibration. I am also skilled in oil analysis and dynamic rotor balancing. Computer literate with SAP experience.

I am a graduate with Chemistry in 1st class having 24 years experience as a Chemist/ Senior Lab Technician in Petroleum Refinery (Takreer, ADNOC) (10 Years), Natural Gas Plants(5 years) (in Malaysia and DUGAS), Petrochemical Plants (5 Years) (MTBE & Pentaerythritol) and 3 years in Pesticid

Having ourteen (14) years of experience in different role as Design Engineering & Field Engineering, Maintenance, Construction, Commissioning, startup, Rotating Equipment protection systems and Plant Turnaround Shutdown activities in Instrumentation Field in Process control systems and Analytical sy

Mechanical Engineer with Masters in Natural Gas Engineering experienced in Surface & Subsurface Operations at Upstream Canadian Oil & Gas Industry

I have been learning Russian for 6 years and can comunicate well in Russian

Instrument Technician. Familiar with various P & ID, Cause & Effect and Logic Diagrams

Several Years experience as drafter, on board last 15 on AutoCAD

Structural Steel & RCC Designs in the fields of Oil & gas, Power, Steel and Aluminum Plants and other Industrial Structures

I am seeking employment in the Petroleum industry with a clear vision for the future, especially in the area of Drilling Engineering, Oil Field Services, or any other related areas. I feel that my education and experience will enable me to contribute to such position now.

Hysis, Aspen plus, PRO-II, HTFS, HTRI, Flare net, Auto-Cad & Microstation and APIs, ASME, IS, Ghost Std.

Thirteen years of total experience in Project Engineering, Tendering, Cost Control, Material Procurement, Execution and Supervision of heavy civil and marine construction of seawater power and desalination plants and wharfs/jetties/local fuel oil and lng/ngl terminals.

B.E Mechanical With 0-1 Year Experience in Chemical & Fertilizer Industry

Technician Mechanical Maintenance

I have a good experience working as Wellsite Geologist for both exploration and development wells (vertical & horizontal). I am familiar with field geological operations and possess good expertise in the Winlog software program. I have good computer skills and fluent in written and spoken

Chemical Engineering Degree and 6 years in Cathodic Protection.

20+ years in Control Systems Engineering/Design. Experienced Intools user.

Having five + years experience in continuous process plants as a senior engineer.

working with Siemens for the past five years in Piping Design & Engineering. expert user in PDS also work on Stress analysis(Static & Dynamic) of various piping sytems using "Caesar". been to Design/ Site offices abroad in Germany & Kuwait.

MSc Chem. Eng. Wide experience in project management, developing, supporting, monitoring, analyzing plans for projects. Develop budgets, define targets for expenditures and oversee execution. Assist management monitoring projects execution. Integrate individual reports to a global report.

Seeking for opening in QAQC and Inspection

Objective: I am seeking a full-time mechanical engineering position. I am looking for a position that will challenge and augment the skills and knowledge I have obtained while providing valuable service to the company.

I am an experienced design engineer working on an oil and gas related projects, worldwide. I am proficient in AutoCAD 2002, Microstation, 3D Plant Design Systems, Smart Plant Review, and INtools.

I am experienced in construction works for oil&gas industry. Have good working knowledge of standards like EEMUA 158, AWS D1.1, ASME Sections VIII, IX and B31.3, RMRS Rules for Construction of Ships, etc. Proficient in planning & scheduling of construction projects using Primavera & MS Project.

Ideally I would like to gain employment within my trade as an electrician, however I am willing to start at the bottom and work my way up within your organization. I am therefore looking for a job as a Roustabout.

OBJECTIVE : Geological Engineer - Over 6 years‘ geological engineering experience - Extensive knowledge of geological formations - Educational background in geology engineering - Able to self-train on new geological software - Responsible, team player, hard working

Cost/Planning Engineer with a Mechanical Engineering background and specialized studies. 5+ years experience. Proven outstanding performance under extreme unfavourable conditions and security threats. Proficient in Primavera, MS Project, spreadsheets. Other :MS e-enterprise, Access and VB

OBJECTIVE To acquire an entry-level position in petroleum or a research position in or relating to mechanisms of asphalting instability in crude oils, interfacial properties of natural surfactants.

Natural Gas Process, NGL/LPG process, Sour Gas, amine/dehydration/sweetening processes. Statistical Process Control(SPC).Optimized analyze/interpret process data to troubleshoot process/equipment problems, enhanced efficiencies and operability of plant facilities/detail engineering design.

To utilize my acquired background in the field of Electrical Engineering as well as my higher education in Engineering Management and to perform quality work in a professional career related to my technical skills

Hands on experience in Installation, Maintenance of Computer controlled Machines, Video Monitors, Indoor & Out door Ac / Dc Motor Controlled Amusement Equipments, Touch Screens, and Power Supply, and Also Maintain NT Server and 10 clients & Hands-on Experience in Servicing Laptops etc.

A progressively challenging position in the area of Instrument Engineering, where past experience and proven abilities can be fully utilized. The preferred position would provide an opportunity for continued professional growth and advancement.

Having acquired skills in Geology and Applied Geophysics, I will like to work in a challenging Oil and Gas Environment.

I am a well experienced process engineer in oil & gas industry. I am happy to work abroad for long durations. I am an Australian citizen presently working in Perth, Australia. I have a solid 12 yrs experience in oil & gas process design.

Seeking a position with a company that will offer an opportunity to further develop my skills in the Heating, Air conditioner and Refrigeration field.

Electrical & Instrument Designer

I am a Petroleum and Natural Gas Engineer having an MSc degree in Petroleum and Natural Gas Engineering from Istanbul Technical University, Istanbul TR.

A professional Electrical Engineer with skills and expertise in project, engineering and maintenance management spanning 20 years hands-on and managerial experience in a Petrochemicals Company and an EPC company. Seeking a rewarding position as a Project Manager/Leader/Sr. Project Engineer

TOOLPUSHER, DRILLING ENGINEER,DRILLER(TOP DRIVE).

am working as an Sr. CAD Engineer, presently working with Aker Kvaerner powergas Ltd at Mumbai. I have been till date worked with Major Pharma, Semiconducters & Engineering Design Consultants firms and Construction Companies at Middle East (8-year) & Bombay (10-years) for world wide various project

I have 25 years in the Construction QA/QC Management/Construction Management field. I possess excellent people skills, communication skills and coordinating skills coupled with the desire to be a team player.

I have good knowledge in oil and gas business related to commercial (Production Sharing Contract, fiscal terms, Joint Operating Agreement and Gas Sales Purchase Agreement). I have 10 years working experince including 5 years as commercial/business analyst and 5 years as process engineer.

Dedicated and highly motivated instrumentation & control engineer

Commissioning engineer of C2-cracker plant, Operation engineer of c2-cracker plant,operation engineer of gas refinery and SRU

I am N.Natesh Kumar(Instrument Engineer), completed my degree in 1997.I have around 8 years experience in Instrumentation Field. At present I am working in a Power Plant in Kuwait as Instrument Engineer(Maintenance). I am very much eager to work in rotational jobs.

Strong motivation for deepening of knowledge on engineering geophysics, both theoretical and practical. Willing to travel, strong and stable character, able to work in long shifts and under pressure. Interested in learning new technologies. Perfectionist in problem solving

I have three years diploma certificates in instrumentation and i have more then 20+ years experience in instrumentation at present i am working with american company at west africa on offshore platform in instrumentation departments.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 [ 76 ] 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out