Resume - Process engineer / production supervisor in oil/gas/petrochemical company.

Misco Jobs

Resume #47662

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Process or Production Engineering (chemical) position in oil and Gas Company and Petrochemicals Company.

PROFESSIONAL EXPERIENCE
PT. Styrindo Mono Indonesia (Ethyl Benzene & Styrene Plant)
Process/Technical Engineer 2001 – Now

Scope of Duties:

1. Monitor plant and process equipments performance, provides technical service to other departments on a regular basis. Includes identifying problems and submitting reports with recommendations for a reliable and safe solution.
* Unit consumption
* Efficiency of furnace, compressor, pump, etc
* Deactivation rate of catalyst of dehydrogenation, alkylation and transalkylation
* Heat transfer coefficient of low velocity heat exchanger
* Performance of cation anion exchanger resin
* Performance of adsorbent on IA drying unit
* Etc

2. Provide trouble-shooting service for potential problems. Includes studies related to process problems, preparing test programs, analyzing results and submitting recommendations for solutions or presenting his findings and conclusions to parties concerned.

3. Review routine test and analysis results from laboratory, identifies and analyses deviations and unusual trends, interprets reasons in terms of operations and submits conclusions to Production Department.

4. Define a project or optimize unit operation to save energy and reduce operating cost.

5. Assigned to a task force to work on a project.
* Engineering requisition
* Bid evaluation
* Vendor document review and delivery
* Construction
* Commissioning or performance of equipment

6. Reviews and proceed management of change of feedstock, chemical, catalyst, operating condition, including modification or new equipment or minor changes initiated by our department and or other Departments and recommends approval or suggest alternative solutions. Continue to monitor modifications from conception through to commissioning. Basis for the change are process improvement, operability improvement, reliability improvement, cost reduction and health/safety/environmental.
* Feasibility study
* Process design definition
* Process engineering check to ensure that design standard are being maintained
* Technical safety requirements are met
* Design is to recognized industrial standards and codes
* Materials comply with company standard
* Plant trial program
* Hazops
* Pre-commissioning check on the completed work to ensure the design is to original proposals
* Responsible for discussing any comments or queries arising from the approval issue of the modification package
* P&ID updating

7. Prepares P&ID for HAZOPS and introduces the proposal to HAZOPS committee for Hazard and Operability Study. Takes an active part in HAZOPS proceedings as a process specialist. Acts as secretary to the HAZOPS meetings and action of HAZOPS findings.

Technical Saving Cost Project:

* Ethylene Feed Gas Online from CAPC, 2006~2007
* Fuel Conversion Project I~III, 2005~2007 (Fuel Oil Blending Facility, New Coal Boiler Installment, Conversion to Natural Gas)
* BTM Tank Rearrangement and Relocation of EB Feed Pump, 2005
* Install MS transfer line from PP1 to PP2, 2005
* Condensate Recovery from No.1 Plant EB-1 Unit, 2005
* EB Direct Feed at No.1 Plant, 2005
* Installation of Demineralization Unit at No. 2 Plant, 2004
* Replacement N2 Liquid to N2 Gas as N2 Back Up, 2004
* Styrene Monomer Plant Revamping Project, 2002
* DM Line Interconnection Between SM1 & SM2, 2001

Technical Process Modification:

* Upgrade Material for 2EA-407 (EB Recovery Column Condenser), 2006
* Relocation of NaOCl Injection Point, 2006
* Connecting Demin-1 Outlet to 2FB-710 (water tank of Demin-2), 2006
* Permanent Injection Line for EC-1108A (New Polymer Inhibitor), 2006
* Changing Valve & Install Flow Indication at BZ Diverting Line, 2006
* ERP2-Flow Meter for Replacement and Additional, 2005
* Relocate Tar Rundown Line to FB-693, 2005
* Install Flow indication at Outlet of Air Dryer (FF-861 & 2FF-861), 2005
* Replace and size up CCW line to jacket GB-301, 2005
* Transfer line from FB-302 to PP2, 2005
* Install flow meter at FA-303 blow down line, 2005
* Material upgrade of EA-312 from CS to SUS 304, 2005
* Establish Permanent Facility for EC-3335A, 2004
* Install Oil Transfer Line from IDO Pit Separator to CPI EB-1 Plant, 2004
* Material Grade Up of EA-411 (SM Product Cooler), 2004
* Replace Sampling Cooler SC-402, 2004
* Cutting Concrete Wall of Check Pit, 2004
* Recycled Benzene Treatment at No.2 Clay Treatment, 2004
* New open ditch at 2BF-600 area, 2004
* Additional steam trace at LPG line to 2BA-201/202/203, 2001
* Pressure Gauge for Monitoring 2GA-500A/B Suction Line, 2001
* Modification of ethylene sampling line (2SI1-501), 2001

Technical Report:

* Dehydrogenation Catalyst of No.2 Plant SM Unit for next SDM, 2006
* Economical review of re-operating desalination unit
* Review of using nitrite base chemical at cooling water system
* Review of activated alumina Alcoa F200 on IA drying unit
* Change of corrosion inhibitor type in cooling water system from molybdate to nitrite base chemical
* Performance test of new TBC product
* Investigation of low PH at demineralization unit product
* Hydrazine replacement in boiler water treatment
* Feasibility study to increase ratio of PA to N2 in the blanketing gas of Styrene tank
* Feasibility study to stop one of air compressor
* Vendor Selection for Coal Loader, 2006
* New Coal Boiler Installation, 2005
* Unloading/Loading Catalyst Activity at Dehydrogenation Reactor ASDM 2005
* Countermeasure for corrosion problem at low velocity heat exchanger, 2004
* Dehydrogenation catalyst of no.1 plant SM Unit for next SDM, 2004
* Unloading/Loading Catalyst Activity at 2DC-101/102 ASDM 2002
* EBZ-500 Catalyst Regeneration (Final Study), 2002
* Tonsil 616 GL Performance evaluation, 2002
* EBZ-500 Catalyst Regeneration (Toward 120% capacity after revamping project 2002), 2002
* 2DC-201 Performance Evaluation, 2002
* Estimate quality of ethylene loss for purging 2GA-500A,B suction line, 2001

HSE Management:

* Member of ISO & SMK3 Auditor Team
* Safety & Lost Prevention Representative
* HAZOPS for Demineralized Water Project 2004
* HAZOPS for Fuel Blending Facility 2005
* HAZOPS for New Coal Boiler Installation, 2006

PT. Styrindo Mono Indonesia (Ethyl Benzene & Styrene Plant)
Production Supervisor 1994 – 2001

Scope of Duties:
1. Operating different plant units and or process equipments in utility area and process area with high standard of quality and safety.
* Boiler
* Air compressor
* IA drying unit
* Cooling tower
* Cooling water system
* Desalination
* Demineralization unit
* N2 generator
* Tank Yard system
* Chilled water system
* BOG system
* Pump
* Compressor
* Furnace
* Column distillation
* Reactor
* Heat exchanger
* Etc

2. Understanding control board instruments to indicate, record, and control process variables.
* Dealing with DCS system
* Cascade control
* Tuning controller

3. Preparing standard operating procedure of process equipments operation manual as guidance operator to operate and trouble shoot the process equipments.

4. Preparing schedule of annual shutdown and idle shutdown

PT. Bening Khatulistiwa (Waste and Water Treatment Consultant) 1993 – 1994
Technical Service Engineer

* Re-establishing and enhancing positive relationship with all customers.
* Having knowledge of water treatment chemicals: PH controller, oxygen scavenger, scaling inhibitor and anti foam.

PT. Badak NGL Company (LNG Plant) 1990
On The Job Training

* Condensate recovery unit
* Mercury removal
* Carbonat & DEA system
* Dehydration
* Scrubber system
* Liquefaction

EDUCATION
Bachelor degree in Gas and Petrochemical Engineering, 1986 – 1992, University of Indonesia.

TRAINING
* Management Training Series "Workshop-KAIZEN", July 2005.
* Management Training Series "Workshop-Management of Change", November 2004.
* Management Training Series "Changing & Innovation", October 2004.
* Safety Training Series "Incident Report & Investigation", September 2003.
* Computer Training Series "AutoCAD 2000", May 2003.
* Process Simulation Software Training Series "Chemcad 5.2", April 2003.
* Safety Training Series "HAZOPS & Risk Assessment", April 2003.
* Computer Training Series "Networking & Database System", March 2003.
* Safety Training Series "SMK3 Audit", September 2002.
* ISO Training Series "Understanding ISO-9001: 2000", November 2001
* Management Training Series "Advance Supervisory", October 2001.
* National Seminar "Operation & Chemical Process Technology Development", March 2001.
* National Seminar "Save Energy Building", March 1997.
* Graduated from LB-LIA English Courses, Jakarta (Basic Level Certificated), 2004.

REFERENCES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5101 to 5150 of 6396)

Go to Search Parameters...

Brief Description

Knowledgeable in all aspects of capital projects including but not limited to the planning phase, progress and cost tracking, material requisitioning, project reporting, project documentation, and scheduling. Proficient in analyzing cost trends and variances for clarification or correction.

SENIOR PLANNING ENGINEER (OIL & GAS)

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

Finish Automation Engineering Technician and working as a Robot Operator

Individual with broad experience in supervising engineering, operations and maintenance assignments. Acknowledged problem-solver with track record of achievements identifying, launching and managing projects. Known for ability to create a positive and productive work environment.

I am a Nigerian

Resident Engineer

salary is negotiable. personal data. educational status and referee.

Working as HSE Mngr. /Eng. /Supervisor postions in RoK and Ex-Soviet Republics, on both oil field and construction HSE managment and supervision for multi-national companies, BSc Civil Engineering and 10 years civil engineering background,reside in RoK, holder of Residence and Work permit for RoK

I'm system engineer with experience in the design, construction and operation of SCADA systems, DCS and Human-Machine Interface designs.

Expert in basic and detail engineering services for EPC execution of Power and Oil/Gas Plant. Global exposure from concept to commissioining support.

12 years of experience on Intergraph EDMS/CAD System, specially PDS & Smart Plant products administration; at present working as EDMS Engineer in Sabic, Saudi Arabia since April-2001. I am going to be released by end of 2007; please find my CV attached herewith.

Instrument Engineer (Construction) , Site Engineer (Instrumentation), Field Construction Engineer (Instrumentation), 05+ Years Exp., Engineerind Degree in Electronics & Instrumentation

Senior registered Professional Engineer with over thirty years of experience in management, drilling and production engineering, planning and operations.

I have 4 years of work experience. Currently working as a Laboratory Supervisor / Chemist in Maersk, Qatar with Wallem Ship Management. Prior to that, I have worked as a Lab Technician in Inter-Tek Caleb Brett (India). I have completed my apprenticeship as a Lab Asst from BPCL, a Fortune 200 co

Junior Electrical Engineer with PLC and Automation experience.

IOSH Managing Safely (UK Certification)

I am a Senior Process Engineer in oil & gas systems. Along my 18 years experience in the field, I have held a number of positions going form operation to project execution and management and process engineering activities. I am fluent in English, French and Arabic.

Process engineer / production supervisor in oil/gas/petrochemical company.

Industrial Electrician by trade who is now working as a Commissioning Operations Maintainer in Explosives and LNG facilities.

I was graduated on jun 2004 in Electronic Communication Engineering (DIPLOMA), I was fully loaded with computer skills as I was a computer maintenance in Putrajaya(Malaysia), Previously I work with Mimos Semiconductors as a Production Technician. I can work as a teamwork.

I am Electronics and Communication graduate and presently working in Saudi Arabia

30 years in worldwide Operations, Sales, Engineering (Cementing Specialist) & Management with leading international service companies - principally Dowell Schlumberger & BJ Services.

Mechanic Maintenance Engineer Oilfield maintenance experience, Trilingual Arabic-French- English Total geographical mobility

Experience in a number of various onshore & offshore, Oil & Gas projects. Expanded knowledge of most aspects of Piping Design from 3D & 2D design concept studies to General Arrangement and Isometric drawings. Involved in in-house designs, shop fabrication & fieldwork.

To work for better with a team work

HAVE BEEN EXPOSED TO : Instrumentation application & equipment in following plants 1. Coal Based Sponge Iron Rotary Kilns capacity 6 X 1,00,000 TPA. 2. Rotary Hearth Furnace : Project 3. Rail & Universal Beam Mill : Project

Instrument Engineer, experience for DCS engineered projects in design & testing of configuration DCS oil production offshore, installation, start-up Commissioning ,Shut-down/Start-up (yearly maintenance) for Oil refinery facilities& Fertilizer production, Familiar with PLC A-B and PLC Siemens.

MECHANICAL TECH: Experience in assembling and overhauling / repairing of all rotary equipment of oil/gas industry.

Have sound understanding in Geology. Graduate in Geology. Doing Post Graduation(final year) in Geology. Done field work. Computer-friendly.

Fully experienced drilling sub sea engineer

Erection and Commissioning of 11.2 MW Power Plant ,• Erection and Commissioning of 500 TPD Oxygen Plant ,• Maintenance of Power Plant and Cryogenic Plants

I am an Mfg/Pro ERP techno-functional consultant working with a reputed MNC as an offshore team lead.

I am an individual that is ever willing to achieve a fulfilling career through professional conduct and right application of knowledge in an ever challenging environment

Mechanical / Piping Engineer with excellent 3D plant design skills, sound knowledge of mechanical & piping systems design and 2.5 years of experience in multinational EPC companies (Siemens & Doosan)

A technocrat with proven experience in the filelds of Marketing and business development, general management of multinational Industrerial valves manufacturing organizationas with an experince of 14 years.

Bachelor of Engineering with over 20 years experience in Process Automation & Control industry.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

I have a BA in Environmental Studies with minors in Geology and Chemistry. I have additional graduate course/fieldwork with a geochemical focus. I have worked with the Office of Surface Mining for 2 years honing my skills in map reading, data collection and manipulation, and hydrology.

Project Maneger, Civil Engineer

Power engineer with post graduate diploma in thermal power plant engineering. Handling emergencies and restoring the plant stability in short time. Trouble shooting the problems in a short span.

Study, Designing & routing of piping

Logistics, Procurement and Materials Manager (Supply chain)

M-Tech (Aerospace) and B.Tech (Aerospace) , Specilization: Computational Fluid Dynamics

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Bachelor degree in Mechanical Engineer with an experience of leadership as a Lieutenant for the Army Reserve of the United States, also graduated from a school of Engineering courses for the Army in MS. Willing to put my knoledge as an engineer for the use of the companys that can benefit them

Contracts Manager in switchgear environment (ABB) - manage 5 Project Managers - Engineers in switchgear and associated equipment projects.

Three years experience, Market modelling and forecasting and reporting, renewable energy planning and research, spreadsheet design, knowledge of carbon, gas, power and oil

Leadership in fast paced, high stress environments

Autocad, Pro-e, Ansys, good communication skills & team player

First Prev 101 102 [ 103 ] 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out