Resume - DP Technician/ ETO/ DP Operator

Misco Jobs

Resume #47755

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To secure a position in the marine/offshore industry where, I can demonstrate my abilities in the fields of electronics, electrical, and dynamic positioning.. I am currently on assignment in the Bay of Campeche, Mexico. I am of Ukrainian nationality and speak excellent English and poor Spanish.

WORK EXPERIENCE
2002-Presently: DP Technician/DPO onboard the Global Industries vessel "Titan-2" with SDP-21 system onboard.
2000-2002: Assistant Electrical Engineer onboard the Global Industries vessel "Titan 2" Responsibilities include maintenance and repair of all electrical/ electronic equipment onboard. These include, but not limited to, SCR Drives, main propulsion motors/ generators, 800mt crane, UPS, data loggers, and associated switchgear equipment. Duties include supervising and training the rest of the electrical/ electronic personnel onboard. Assisted in the installation of a DNV approved Class 2 Konsberg Simrad Dynamic Positioning system that included integrating existing vessel's thrusters with newly installed outboard thrusters. Was involved in the installation and implementation of new sensors added to DP system to include C-Nav and Seatex DGPS, MTS Fanbeam, Bandak Mk12 Tautwire, and Konsberg HiPAP acoustic positioning system. Also, I am currently performing assisted DP Operator duties on the bridge and logging DP console watch experience time to use towards the accreditation of a DP Operator's certificate from the Nautical Institute.
1999-2000: Chief el. engineer onboard of the Chernomorneftegaz Industries supply vessel "Tsentavr"
1998-1999: Chief el. engineer onboard of the Chernomorneftegaz Industries crane vessel "Chernomorets"

EDUCATION
1998- 2003: Graduated Nycolaevsciy Shipbuilding University, Ukraine pursuing Mechanical Engineering degree.
1994-1998: Bachelor degree in Electrical Engineering from Kherson Marine College, Ukraine.

CERTIFICATIONS
February, 2002: Completed Simrad's Dynamic Positioning Operators Induction Course. Earned Certificate and Nautical Institute DP Operators log book.
June, 2003: Certificate of Competency (no. 02268/2003/01) from Ministry of transport, Ukraine, certified as First-class electrical engineer.
July, 2005: Endorsement (no. 02268/2003/01) from Ministry of transport, Ukraine.
May, 2005: Certificates from Shipping Industry of Ukraine in the skills of Personal survival, fire fighting and prevention, basic first aid, personal safety, and emergency rescue boat operations, Advanced Fire Fighting and Medical Emergency.

REFERENCES
Available upon request

Salary Requirements
Prevailing Scale

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2951 to 3000 of 6402)

Go to Search Parameters...

Brief Description

QC/Welding Engineer/ASNT NDT Level III

M.Sc. in mechanical engineer / planning engineer in oil company for more than 3 years & Head of mechanical engineering department in Faculty of petroluem technologies for 2 years

Piping Design Engineer

Pipeline Engineer with strong basic pipeline engineering background and capable using pipeline engineering software such as Offpipe, Abaqus, Orcaflex, AutoPipe, PlusOne, Ceasar, and Catia. All pipeline design/ analysis accordance to DNV, API and ASME standard.

Seeking a suitable position in Oil & Gas field operations

I have completed my B Tech in instrumentation from calicut university ( India) with an aggragate of 72.7%. I have got experience in FACT, a leading fertilizer company where i got chance to familiarize with DCS(YokogawaCS100,HoneywellTDC300),PLC(AllenBradly,Omron) and got experience feild instruments

Auto Cad map Arc GIS 9.1 Software Quality Testing Hardware & Networking Operating System: NT, Windows 2000, XP, Linux, Unix Language Known: C , C++ GUI Front End: VB 6.0 Web technologies: HTML, JAVA Script Database Known: Oracle

Very dedicated and hard worker who will not walk away from a challenge.

Chemical Engineering graduate from A.A.M. Engineering College , Thiruvarur under Anna University Tamilnadu. With the qualification mentioned in the resume, I am confident that I can undertake and discharge successfully my duties in your organization.

Electronics and Instrumentation Engineer, Certified Automation Engineer with one year related experience.

Work Experiences

B-tech Mechanical and Post Graduate Diploma in CAD/CAM , now Pro-e piping and RSD .

Senior Marine Facilities Engineer, Highest qualification: B.Sc (Eng) Civil, University of Cape Town, 1989, Overall working experience 16years, specializing in Marine Terminals, Harbor and Coastal Structures, Oil & Gas Development and Port Infrastructure Projects.

Seeking assignments in Production, Operations/ Process Enhancement in Chemical Engineering Domain with an organisation of repute.

Instrument designer+PDS+INtools

I am a petroleum engineer. I want to find a job

Purchasing Officer possesses Product costing, Price negotiation, Suppliers sourcing skills and Demonstrate ability to read blue print design and evaluate and testing of quality product.

Subject: Apply for a job.

10 YEARS EXPERIENCE IN PROJECT DESIGN , ERECTION & COMMISSIONING AND MAINTENACE OF PETROCHEMICAL AND REFINERY PLANTS. MAIN AREA OF CONCERNS : HONEYWELL TDC 3000 DCS , FOXBORO I/A SERIES SYSTEM

More than 10 yrs in Oman & India activities are directly related to QA/QC/inspection during design, procurement and construction of various projects. Fertilizer , Refinery, Petrochemicals, Power Plant, Acid Plant, Pipeline, Production/Shipping Stations & Oil Field

To provide significant contributions in software engineering leadership and technical solutions by performing all software processes and management tasks in an environment using new technologies with a team-oriented group.

I am seeking the position of MWD Engineer/Supervisor/Consultant/ Independent Coordinator.

Technical Support

To obtain a full time position in Chemical Engineering beginning in the fall of 2002.

I am a maintenance Team leader for all trade in the chemical plant. I have over 15 years instrumentation experience. 3 Years management experience.

Sandra H Evans. A Geology graduate with a first class honours Geology degree and an MSc in Basin Evolution and Dynamics. I have experience using seismic interpretation software such as Schlumberger IESX Geoquest, Geovis, the Kingdom Suite and ERMapper. I also have some research experience.

The scope of my work concerns Pressure Transient Analysis, Well Test Design, Reservoir Simulation, Multiphase Testing, Optimising Perforations in weak unconsolidated formations and designing artificial lift mechanisms.

To obtain an entry level engineering position that promotes continuous educational and professional development while solving hands on and theoretical problems

I am seeking the position of MWD/LWD Engineer/Supervisor/Consultant. I have 7 years exp. as MWD Engineer prior to maintenance of the MWD Systems.

B.ENG. MECHANICAL ENGINEERING (SECOND CLASS UPPER DIVISION)

I am a Civil Engg.( Diploma ) with 13 years of experience in pipe line (Sewerage and Drainage ),Buildings at various positions. I can assure you to deliver the best from me.

Petroleum Engineer with over 6+ years of International experience in Reservoir Simulation, Drilling Engineering, Well Log Interpretation, Well Test Analysis and Project Management. He is a proven Engineering and Technical Communicator.

I have over 10 years of North Sea drilling experience. I have attended many oil company-planning meetings for my current employer and have been the point of contact for various projects in the last 3 years. This has increased my interest in project planning & implementation,

Petroleum Engineer with 10 years experience, some legal and accounting skills, contract negotiation as well. Will consider any position, including entry level as I have been out of the oil business for some time. Will also consider any location.

System Design for power systems, Project Management, Basic PLC programing, Netwroking

Experience in Mechanical Engineering Design, skilled in detailed design of piping system for Petrochemical plants, Power Plants, Oil & Gas project. Also knowledgeable in 3D modelling using PDMS, Autocad Inventor 2008 with reference to JIS, ANSI, and ASME. Detail Design of Pressure Vessel.

Experience with service and repair of Electrical Panels and Equipments, electrical testing and various machine controls like PLC and AC drives. Good knowledge of PLC programming ( ladder diagrams), technical drawing and implementation.

Now I'm working in Rashid Petroleum Co. as a Subsea Engineer

4 yr degree in Metallurgy + 2yrs eperience in an integrated steel plant , good at Analytical skill

Diploma in Mechanical Engineering with 8 years Experience in Mechnical Maintenance(Rotary and Static equipments )at Oil and Gas fields

I bring with me a Bachelor of Science degree in Earth and Environmental Science - major in Geology along with nearly five years of experience with Geologic Interpretation and Technical Support. I also have an applied degree in Petroleum engineering from SAIT with a little experience in reservoir eng

12 Years on offshore industry working with subsea installation of equipments (manifolds, suction piles, PLETS etc) and flexible lines in shallow and ultra-deepwater; subsea connections; pull-ins; remote and dive assisted interventions; inspections, maintenance and subsea repairs; stand alone equip

Good technical skills, Like to work with computers, Internet, Driving license category B.

Working as Petroleum Engineer since 17 years. Engineer, Supervisor and Manager roles in drilling, wellcompletion, production and workover operations in oil and gas E& P .

I am presently working as Manager - Operations (Process) with IndianOil Petronas for their 6.0 lakh TPA LPG Import/Export Terminal at Haldia, India. I have over 20 years of experience in the construction, commissioning & operations of LPG Filling Plants & Cryogenic LPG Terminals.

Electrical, able to read interpret electrical diagram and flow control from 11kv step down 400 V, and from 400 Vac to DC voltage to supply all DC drive motors.

Upstream oil and gas production engineer/process engineer/facility engineer- well testing/gas lift optimization/ separation and gas compression facilities-offshore installation

Maintenance Planner with SAP System

DP Technician/ ETO/ DP Operator

PDS, Piping Designer, Smart Plant Review, AutoCadd, PDMS

First Prev 51 52 53 54 55 56 57 58 59 [ 60 ] 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out