Resume - Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3...

Misco Jobs

Resume #48344

CONTACT INFORMATION:
View contact information...

Academic / Technical Qualifications
BSc in Material Science and Metallurgy [Incomplete]
BTEC National Diploma in Fabrication and Welding [Crosskeys College, South Wales, UK – 1984]
Basic Programming Certificate [Crosskeys College - 1984]
City & Guilds 822 Welding Oxy-Acetylene and Metal Arc [Jefri Bolkiah College – June 1976]
City & Guilds 820 Basic Engineering – Mechanical [Jefri Bolkiah College – Dec 1975]
Lower Certificate of Education [Anthony Abell College - 1973]

Professional Qualifications
CSWIP 3.2 Senior Welding Inspector
BGas-CSWIP Grade 2 Painting Inspector
CSWIP 3.4 Radiographic Interpretation Level 2 [Group A and B Materials]
CSWIP 3.1 Welding Inspector
ISO9001-2000 Approved Lead Assessor
NACE Painting & Coating Inspector Level 2
Singapore Institute of Standards and Industrial Research [SISIR] ASNT Liquid Penetrant Testing Level II
SISIR ASNT Magnetic Particle Testing Level II
SISIR ASNT Ultrasonic Testing Level II
SISIR ASNT Radiographic Film Interpretation Level II
AWS Welding Inspection Specialist Certificate
NRPB Certified Radiation Protection Supervisors
Royal Society for the Prevention Of Accident [ROSPA] Safety Inspector

Safety Courses
Tropical FOSET – OPITO APPROVED Course – Megamas Sdn Bhd
BOSIET – Warm Water [TROPICAL] – OPITO APPROVED Course – Megamas Sdn Bhd
Managing Hazard At The Workplace – Megamas Sdn Bhd
Permit To Work For Signatories – Megamas Sdn Bhd
Permit To Work For Auditors – Megamas Sdn Bhd

Other Courses Attended
Contract Management & Managing HSE in Contracts Workshop – June 2003
Senior Welding Inspector CSWIP 3.2 Course (WIS10) - June 2003
Mobile Crane Inspection and Safety Consideration Course - June 2002
Over-Head Crane Inspection and Rigging Consideration course - June 2002
Wire rope care, maintenance & inspection and slinging/rigging course - June 2002
T.D. Williamson, Inc. Tulsa, Oklahoma, USA Pipeline Product Seminar - Sept 1989
S.G.S. Industrial Inspection Division the Basic Quality Assurance Course Sept 1984
The Welding Institute Practical Radiography Course - March 1980
The Welding Institute Comprehensive Practical Ultrasonic weld examination - April 1979
ASME SECT. VIII DIV. 1 Boiler and Pressure Vessel Code –Design & Fabrication of Pressure Vessel [with alteration and repair] - [Jakarta – Indonesia] – October 1997

Others info
Registered Senior Welding Inspector to The Welding Institute UK.

CAREER SUMMARY
Has more than 28 years experience in Welding/Fabrication and Lifting Equipment Inspection in the oil and gas industry. Career progression from Assistant Engineering Inspector to Senior Welding Inspector / Coating Inspector for Brunei Shell Petroleum, as Plant inspector for Shell Refining Australia and Cressier Refinery in Switzerland, as head of QA/QCS Engineer for Brunei Shell Petroleum and currently holding a position as Branch Manager for Ptas-Its Sdn. Bhd. in Brunei Darussalam.
I have demonstrates my technical, professional and attitudinal capabilities necessary to be a leading team member for onshore and offshore work. Good practical experience in materials, welding [repair and modification], inspection, corrosion, failure analysis evaluations, fracture mechanics in design and quality control. Conduct Base Line Inspection on new pipeworks and Risk Based Inspection on existing pipeworks. Familiar with Shell DEP's Standard and other International Standard such as ASME, ANSI, API, BS and ISO. Good knowledge and understanding of Quality Management System [QMS] with emphasis in Quality Auditing on contractor Quality Management System and internal auditing for self assurance of department compliance of the Company QMS. Last but not least has field supervision experience of complex and difficult repairs of critical steel under severe time restraint.

Principal achievement to date
Nominated as the Operation Services Environmental Management Representatives in pursuing ISO14001 certification. – 2005. Operation Services was successfully accredited the ISO14001 certification under my leadership.
Successfully developed and Launch Competent Standard for Plant Inspectors – 2002
Assist Cressier Refinery, Switzerland during their Year 2000 major shutdown on behalf of Brunei Shell Petroleum Company. Rated as outstanding plant inspector by the Chief Inspector of Cressier Refinery. (See Attachment 1 – Cut and paste from email).

Contribute to the success of Well Blow Out (RS-19) containment supporting Red Adair Company – 1989

EXPERIENCES

1st Nov. 2005 – Present
Ptas-Its Sdn Bhd, Kuala Belait, Brunei.
Location: Brunei Darussalam
Position: Contract Manager for Brunei Branch

Responsibilities:
Responsible for all of the Brunei Branch QC Inspection operations and personnel, both onshore and offshore. Personnel include Senior Inspectors, Multi Discipline Inspectors, Radiographers etc. (in excess of 30 personnel).
Scope of work includes but is not limited to:
Radiography (X & Gamma Ray), Magnetic Particle Inspection, Dye Penetrant Inspection, Visual Inspection and Ultrasonic Inspection
Also liaising and coordinating clients' work.
Clients include but are not limited to;
Shell Brunei Petroleum Company
SKSWood Sdn Bhd
Foster Wheeler Sdn Bhd
Brunei LNG
Total E & P Borneo
At times seconded to any of the above clients due to operation requirement and scope of work includes but not limited to:
* Supervision of inspection personnel
* Compilation and Verification of QC Data Package prepared for the work conducted.
* Review of Plant, Equipment & Consumable Certification Records to establish compliance to Project Requirements.
* Ensuring that work activities are being conducted conforms to applicable Codes, Standards & Client Requirements
* Welding Inspection & Radiographic Interpretation of various welded joint
* Painting Inspection carried out to Client requirements
* Witnessing of Hydrotest and Leak Test
* Magnetic Particle Inspection and Dye Penetrant Testing on Various Weldments.

July 2000 – 24th October 2005
Brunei Shell Petroleum Company
Location: Brunei Darussalam.
Role: QA/QCS Engineer
Department: Engineering Support

Responsibilities but not limited to:
Main Responsibilities and accountabilities but not limited to:
Acting and manage QA/QCS (SEN/13) Section in the day-to-day running of the section.
Support project departments in quality related matters.
Review and update Quality procedures as and when required e.g. BSP12P9 and BSP12P10
Overseeing and auditing inspection work done by contractors QC inspectors.
The verification / inspection audits cover all Welding, Painting, Radiography MPI, UT, and Radiographic Interpretation activities.
The scope of the QA/QC Audits covers contractors in Brunei and in Asian Region.

Plant Inspector
April – June 2000
Cressier Refinery – Now known as PetroPlus
Location: Cressier, Switzerland
Role: Plant Inspector
Department: Inspection and Quality Control.

Seconded to Cressier Refinery, Switzerland during their Year 2000 major shutdown. Responsible in the inspection of all pipe-works, structural, column, heat exchangers, vessels, coolers, Fluidized Catalyst Cracker Unit [FCCU], Reactor, furnaces, boilers, flares stack, and all other associated refinery equipment.
Please refer to my work performance during the shutdown (attachment 1) below from the Chief Engineer of Cressier Refinery.

April 1999 - March 2000
Brunei Shell Petroleum Company
Location: Brunei Darussalam.
Role: Section Head of Onshore Inspection and Lifting Equipment Inspection and Certification.
Department: Inspection and Quality Control Assurance.
Responsibilities but not limited to:
Manage and conduct QCS inspection on Company's new project.
Manage all onshore piping, vessel, structure, wellhead and other onshore facilities inspection requirement.
Manage and supervise all contractor inspection personnel utilization to their maximum.
Plan and budget for all future work including resources requirement.
Assist and promote Local Citizen Development in-house and Government Students on attachment to the Department.
Provide assistance in conducting interview for new QC personnel recruitment.
Attend and participate in monthly Health, Safety and Environment meeting.
Lifting Equipment Inspection and Certification
Provide support to project teams in verification of:
a. Vessel / Barge Lifting Appliances prior to hiring.
b. Lifting tackles certification and documentation c. Lifting equipment intended to be supply to BSP by Vendor.

Manage contractor surveyor's utilization daily and verified time allocation.
Plan and conduct Lifting equipment audit yearly.
Assist Human Learning Department [HLD] in reviewing tender document for Rigging and Slinging, Mobile Crane course.

Jan. 1991 – Mar. 1999
Brunei Shell Petroleum Company.
Location: Brunei Darussalam.
Role: Section Head of Offshore Inspection
Department: Inspection and Quality Control Assurance.
Responsibilities but not limited to:
Manage and plan all offshore inspection activities as per the Company Business Plan. This includes new fabrication / construction work and existing pipe-work and structural. In the existing pipe-work, baseline survey was conducted under On-stream Inspection (OSI) project.
Manage and utilized all in-house and third party inspection resources to their maximum.
Carry out weekly verification on all work done by contractor and BSP own inspection personnel.
Compile report of findings and made recommendation weekly to BSP Service Manager Leaders Team [SMLT].
Developed Work Strategy and Planning which include budget allocation, resources requirement for all future work with view of improvement in terms of effectiveness and cost saving.
Assist and promote Local Citizen Development in-house and the Government Students on attachment to the Department.
Participate in technical evaluation of Inspection Contract tender evaluation submitted by bidders.
Review all offshore inspection work packages submitted by the Computerised Inspection Reporting Retrieval and Analysis System [C.I.R.R.A.S.] group prior to execution.
Prepare and compiled weekly progress reports on all inspection work done.
Maintain flexibility in work execution in the event of clashes with other work in same platform/location.
Promote Abseiling Inspection Technique in order to save cost against scaffolding.

Jan. 1990 – Dec. 1990
Shell Refining Australia [Geelong Refinery]
Location: Australia.
Role: Plant Inspector for West Area.
Department: Inspection and Quality Control Assurance.
Responsibilities but not limited to:
Responsible in the inspection of all pipe-works, structural, column, exchangers, vessels, coolers, fluidized Catalyst Cracker Unit [FCCU], Reactor and all other associated plant equipment during major shutdown. Assigned as Quality Control Surveillance Engineer towards the end of the assignment. Role includes providing QA/QC input to project group, which includes review of Inspection Test plan, witness welders qualification test, review of welding procedures etc. Project includes the fabrication of new heat exchangers, pressure vessels, air receivers and storage tanks refurbishment.

Sept. 1986 – Dec 1989
Brunei Shell Petroleum Company
Location: Brunei Darussalam.
Role: Construction Supervisor Onshore (Mechanical)
Department: Onshore Construction Projects
Responsibilities but not limited to:
Plan, execute and monitor all construction work carried out by the approved contractors are in-line with BSP procedures, meeting HSE requirement, completed as per approved plan and within the approved budget.
Projects experiences includes but not limited to:
Wellhead Piping Upgrade, Flowline laying, Wellhead tie-in and hookup, Wellhead abandonment project, new-site preparation for drilling rig to move-in including provision for utilities line such as industrial and potable water, construction of Tank Groups (TG 30 & 31).
Actively involved in supervising and construction of facilities required by Red Adair Company during major Well Blow-out Incident

Sept. 1985 – Aug 1986
University College Cardiff, South Wales, United Kingdom.
Location: United Kingdom.
Attended Bachelor of Science in Materials Science and Metallurgy Course.

Oct. 1984 – Aug 1985
Brunei Shell Petroleum Company
Location: Brunei Darussalam
Role: Engineering Inspector
Department: Inspection and Quality Control Assurance.
Responsibilities but not limited to:
Carry out Non Destructive Testing on onshore and offshore piping, flow-lines, risers, weldments, vessels, storage tanks and drilling equipment such as drill pipes, drill collars, monel drill collars, whole opener, stabilizers. Inspection technique used Ultrasonic, Magnetic Particle, Dye Penetrant and Radiography.

Sept 1982 – Sept 1984
Crosskeys College of Further Education, South Wales, United Kingdom.
Location: South Wales, United Kingdom
Attended Business Technical Education Council [BTEC] National Diploma in Welding and Fabrication.

Mar 1977 – Aug. 1982
Brunei Shell Petroleum Company
Location: Brunei Darussalam
Role: Assistant Engineering Inspector.
Department: Inspection and Quality Control Assurance.

Responsibilities but not limited to:
Assist Senior Inspector in carrying out Non Destructive Testing on onshore and offshore piping, flow-lines, risers, weldments, vessels and storage tanks. Inspection technique used Ultrasonic, Magnetic Particle, Dye Penetrant and Radiography.

Jan 1974 – Sept. 1976
Jefri Bolkiah School of Engineering, Kuala Belait
Location: Brunei Darussalam.
Attended Basic Engineering Trade Subject and Welding Fabrication Course

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 6402)

Go to Search Parameters...

Brief Description

Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.

Shut-down supervisor, project manager, safety manager,i&e control technician, refinery,

I AM A HIGHLY QUALIFIED PIPE FITTER AND GAS ENGINEER EXPERIANCED IN LPG AND NATURAL GAS, I AM COMPITANT IN WORKING ON SCREWED STEEL PIPEWORK AND HAVE WORKED IN THE PLUMBING AND GAS INDUSTERY FOR OVER 25 YEARS.

Instrument technician

22 years experience and I am presently working as an Electrical Supervisor in Kuwait National Petroleum Company

15+ years experience, mechanical engineering background, AutoCAD, ProCAD, Microstation, Micro Office

Well versed at the interpretation of Piping and Instrument Diagrams, Signal Flow Diagrams, Rung Diagrams, Panel Drawings, Loop Sheets.

I am practical person and have occurrence procurement base.

· Dynamic sales professional with over eighteen years of experience promoting industrial equipment and service to various Process Industry

Mechanical Engineer with 11 + Years of experience in Materials and Asset Management

Currently set to graduate from University of Houston in December 2008 with a Masters Degree in Petroleum Engineering. I am a full time employee also at El Paso, working in the Reserves Mangagement group as a Sr. Production Engineering Analyst.

Professional in Upgrading and new built Rigs for Offshore and Onshore

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

Please find enclosed my resume to be considered in a position as an Electrical, instrument and control engineer (design, cost estimator, operation and / or maintenance) within your company.

I want drilling supervisor/Rig superintendent job

About twenty (20) years of diverse working experience in various fields, out of which Ten years in the Oil & Gas sector of Middle East. Worked for Projects for Agip KCO, ADCO, Dolphin, Aramco, Sceco Etc.

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Production Completion Engineer

I am Vasu Jajala working in Shell Nig.Ltd. As a Construction Instrument Supervisor. I have 16 years plus of practical experience in the field of Process/Machine Control Instrument of Offshore & Onshore, Petrochemical, Petroleum refinery, Oil/Gas and QATAR LNG industries.

A proactive and analytical Mechanical Engineer with over 12 years experience of Working in a Multinational and Multi cultural work environment in fabrication operations, welding processes, project management, quality / process enhancement ,maintenance with highly regarded organizations.

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

Sr. Piping Designer - CadWorx/AutoPlant

I have experience in design of ALS (pcp, rod pump, esp, plunger lift) and their software (S-rod, PC-Pump, Prosper) completion systems, pipe lines, production plant, Sofwares like DSS, Open Wells, Sahara, M-Bal, Prosper, Visio, Merak Peep. I have too experience as coordinator in tool contracts.

2D, 3D (Land/TZ/Marine) both on-site QC and full Data processing and Operation Design

Electrical Engineer with 14 years of hands-on experience in the various fields of engineering assignments, such as; project management & supervision, construction & maintenance, quality control & inspection, testing & commissioning works, most of which were undertaken in the venue of oil & gas,

Piping PDS PDMS

Job Skills:Good verbal and written communication skills Physically fit to do the work required, have no a fear of heights or confined spacesA positive attitude, high tolerance for job pressure and long hours, including to be on call 24 hours a day, 7 days a week and on weekends and/or holiday if nee

PDS PDMS Plant Layout Piping Material Specification

Reservoir Engineer with over ten years experience in reservoir modeling, simulation, history matching, well testing, material balance, decline and nodal analyses for carbonate/clastic oil and gas reservoir development.

Area of Expertise: Familiar with trouble shooting and prevention of occurrence of breakdowns by interpretation of operational data, through analytical approach. Having expertise on engines, auxiliaries And Heavy Engineering Machinery(Auto workshop),Commissioning experience in Jack up and deep drill

Worked with electrical substation, transformers, circuit breaker, relays and other equipments

I am Sr Pipe stress engineer and currently working at Ranhill Worleyparsons at malaysia

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Commissioner Supervisor of Hydro Power Plants.

Seconded to Reservoir Characterisation Department for specific modelling projects including static Uncertainty Analysis & Field Development Asset Teams. Full Field static modelling using multiple techologies. Entire geocellular modelling workflow including lithology & depositional facies.

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out