Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #4874 next resume »»
CONTACT INFORMATION:
View contact information...

OBJECTIVE

Seeking full time position as Petroleum Engineer/Petroleum-Related Technologist

PROFILE

* Over 4 years of reservoir engineering experience in USA and Canada
* 8 years of petroleum engineering/well completion experience in China
* Expertise in using BOAST 98, SGM, ECLIPSE and IMEX
* Strong knowledge and experience in well drilling & completion, reservoir characterization and simulation, reserves determination, development planning and production forecasting
* Highly motivated self-starter with ability to work within a team or independently

EDUCATION

* M. S., Petroleum Engineering (Reservoir), University of Oklahoma, USA, 2003, GPA-3.8/4.0
* M. S., Petroleum Engineering (Completion), Southwest Petroleum Institute, China, 1990, GPA-3.75/4.0
* B. S., Petroleum Engineering, Southwest Petroleum Institute, China, 1987, GPA-3.84/4.0

EMPLOYMENT EXPERIENCE

AGAT Laboratories Ltd., Canada
Reservoir Technologist, 2003-present
* Successfully performed detailed reservoir fluid studies for over 10 oil companies
* Independently completed special core analysis for reservoir characterization

University Of Oklahoma, USA
Reservoir Research Assistant, 1999-2003
* Performed reservoir evaluation, reserves determination, reservoir simulation and development plans
* Successfully conducted reservoir simulation field case studies of the Xan field, Guatemala, and the Cleveland sand reservoir of Pleasant Mound oil field, Oklahoma, USA, including data gathering and preparation, model construction, injection & production performance analysis, history matching and forecasting
* Conducted geomodeling and flow simulation of Bohai Bay oilfield, China, using SGM and StrataSim, resulting in 4% higher recovery due to the increased water flooding sweep efficiency

University Of Oklahoma, USA
Visiting Scholar, 1998-1999
* Studied advanced completion and reservoir development
* Conducted experiment program design and experiment data analysis to evaluate formation damage

Center for Well Completion Techniques of China National Petroleum Corporation (CNPC), China
Petroleum Engineer, 1992-1998
* Independently performed well completion designs for 40 vertical wells and 15 directional wells
* Optimized casing program design for 5 deep or ultra-deep wells under the Complicated Geologic Setting in Talimu Oilfield, Xinjiang
* Developed well completion optimization and productivity prediction software package, successfully being used by over 5 oil companies
* Evaluated formation damage and provided technical proposal for formation damage control in drilling and production through field data analysis and laboratory study for 8 oil and gas fields
* Performed completion fluid study and recommended completion fluid formulation
* Conducted completion and workover operations for over 10 wells
* Established mathematical model of perforation completion and developed perforation completion simulation software
* Supervised and implemented well completion designs and techniques for both vertical and horizontal wells
* Provided technical proposal, technology transfer and technical training to clients' employees from seven Oil & Gas Drilling and Production companies
Director of Laboratory of Center for Well Completion Techniques, 1996-1998
* Efficiently managed and directed laboratory research projects for 8 oil and gas companies
Assistant Petroleum Engineer, 1990-1992
* Performed completion method selection of horizontal well for heavy oil in Fengcheng, Xinjiang
* Completed database establishment and application of well completion and formation damage control

PUBLICATIONS

* "Pore and Throat Network Model and Its Application to the Optimal Selection of Temporary Plugging Particles," SPE 31099,1996
* "Discussion of Well Completion Optimization," Journal of Petroleum Drilling Techniques, June 1997, China.
* "A Study of Particle Plugging Mechanism in Reservoirs," Journal of Drilling and Production Technology, January 1998, China
* "Exploitation of Coalbed Methane in the World: Problem, Cause and Solution," SPE 39998, 1998
* "Some Problems in the Exploration and Exploitation of Low Permeability of Oil and Gas Resources in China," SPE 50923, 1998

AWARDS

* 2 First awards for excellence on 2 State-funded Key projects in 1998 & 1996, CNPC
* 3 First awards for excellence on 3 Oilfield-funded projects in 1998, 1997 & 1996, CNPC
* Third award for excellence on one CNPC-funded Key project, 1996, CNPC
* First award Scholarship for academic excellence from 1984 to 1986 respectively, Southwest Petroleum Institute

COMPUTER SKILLS

Language: Visual Basic, Quick Basic, Fortran and Oracle
System: Unix, DOS, Vax and Windows
Software: BOAST 98, SGM, ECLIPSE, IMEX, Microsoft Office, Surfer, Grapher, 3DFiled

PROFESSIONAL AFFILIATIONS

Society of Petroleum Engineers (SPE)
Chinese Petroleum Society (CPS, China)

REFERENCES

Available upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2201 to 2250 of 7051)Go to Search Parameters...
Brief Description
EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987
15-years Professional Experience in Contract Department (QS), Planning & Scheduling, Construction & Testing, Oil & Gas Fields, Fertilizer & PTA
I have had acquired a sound knowledge of engineering principles with emphasis on designing and exposure of mechanical equipment and piping system installation. In addition, I have excellent knowledge in codes and standards such as asme, astm and api. Expertise includes,To attend and witness any test
B.Sc. Degree, WellView, DIMS, Drilling and Drilling Fluids Programming, strong computer skills in VB and Office
I have 12 years experience on design and manufacturing industries. Moreover I completed 4 design courses (Stress Analysis, Finite Element Analysis, Structural design, Computer Aided Mechanical Design) and 5 manufacturing (Manufacturing of Composites, Mechanical forming and shaping of metals)
Included in this resume are details of my experience on gas pipelines. I have welding inspection qualifications and have experience of NDT techniques which are used in the pipeline industry. I also have experience of construction on gas pipelines while working for Transco.
* Over 4 years of reservoir engineering experience in USA and Canada * 8 years of petroleum engineering/well completion experience in China * Expertise in using BOAST 98, SGM, ECLIPSE and IMEX
Results oriented, highly focused professional offering over 14 years of experience in oil & gas research with strong working knowledge of lease terms and provisions. Proven team leader committed to reaching company objectives
Am a chemical Engineering Graduate with 6 months work experience at Kaduna Refining & Petrochemical Company. A Safety expert & a plant operator. posses good team spirit & can work under pressure.
repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty machines,and other equipment.
EXPERICNE SALES AND PURCHASING
Chemical engineer with storngpetrochemical operational background,strong analytical ability,rich experience of percommisioning,commisioning ans startup of plant,was involved in major debottlenecking of the plant
Major expertise are as follows Stress analysis in CAESAR-II software for static and dynamic load cases (viz. Static, Wind, Modal, Analogue, Safety relief, Slug flow and Seismic Analysis). Engineering of pipe support including spring hangers.
Process Design Engineer. Command on Process Simulations of Refineries and Gas Plants. Good hand on all aspects of basic engineering design from feasibility study, process selection, FEED study to bid evaluation. Excellent interpersonal, team leading and managing skills. Strong team player.
Master Degree in Geobiosphere - Geology, Sedimentology, Numerical Modelling
I'm a team player and very active in searching for work that I can do in order to help the team to meet schedule.I know how to use PDS, Microstation, Smart Plant Review and Autopipe.I'm willing to learn/discover new things that are related in my work and willing to be train if the oppurtunity comes.
Hi, I am Santosh Kumar Addagatla, graduate from Texas A&M University Kingsville with Masters in Chemical Engineering. I have 1 yr professional work expreience and hands on expreience with many modeling softwares and dealing with clinets and vendors. Autherized to work for any Employer.
tecnico en ing. electrica con experiencia en el area petrolera ( refinerias subsidiarias de exxonmobil ) conocimiento en safety bajo las normas de seguridad aplicadas por exxonmobil.experiencia en mantenimiento de sistemas de control y automatizacion de motores electricos ,
Performing NDT in Carbon steel, Stainless steel, Ni-Cr materials as per ASME SEC V. RT in Pressure Vessels and Boiler with heavy wall thickness. Familiar in Radiographic techniques Panoramic, DWDI, DWSI in pipes and SWSI in plates. Liquid Penetration Testing in weld metals, Evaluation and Reco
BE Instrumentation Looking for Automation Job
I have bachelors degree in chemical engineering from a reknown university in Nigeria, Africa. I have a strong working experience background from an oil and gas company in Nigeria where I was trained to be proficient in equipment sizing, use of hysys, FEED, basic and detailed engineering, etc.
Piping engg with 4 yrs knowledge of pdms administrator
I, Naitik Shah , a recent graduate from University of Florida did my Master¡¦s of Science in Industrial & Systems Engineering. I am interested in exploring opportunities with your company in the area of Industrial Engg where I can utilize my Masters education and relevant internship experience.
Joined FOCUS ENERGY LIMITED AS G.T.E in OIL & GAS EXPLORATION Division on their DEEP DRILLING RIG ZJ 70, JC 40 in the Rajasthan area at Jaisalmer.
Energetic, degreed and experienced Safety Professional seeking expat position in E/P field. I am well versed in driving down incident rates and educationg the work force. I am a firm believer in delivering required HSE training, coaching and monitoring results. I believe in accountability of each wo
Since Sep 2006, Well Site Geology and Mudlogging
from last 5 years working as protection engineer in high voltage AC.
Instrument engineer with experience on EPC projects and CMMS activities
Having 5 years of Professional Experience
12 years experience in industrial and general maintenance field.
Drilling Engineer / TourPusher
B.Sc. in Civil Engineering from BUET, Dhaka, Bangladesh having 10 years of experiences as a practicing engineer particularly with consulting and construction works. working experience with national and international consultants.worked in Road,bridge,subsoil investion an glycol gas plant project
Electrical/Instrument Construction-Field Eng, 25yrs+ on/offshore oil & gas project experience.
Structural engineer
Drilling Engineer, 14 years experience in drilling / supervision on Algerian oil & gas fields. Database administration skills.
Qualification: Bachelor of Science geology,(Hons) Computer skill, computer logging unit,, well site engineer drilling and logging, geological samplings, oil and gas evaluation interpretation and correlation of type of logs, daily preparation of reports, stratigraphic correlations
6+ yrs. experienced in Tankage Mech. Fabrication & Construction Engineering
I am a AWS-CWI (Certified Welding Inspector) with ASNT Level-II Certificate (RT, UT, MPT, LPT) and BGAS-CSWIP GRDAE-II. I have 6 experience. Three year experience in offshore project and three year onshore project.welding inspection and Quality control experience in reputed companies like Hyundai
Instrumentation engineer.Have been working with various companies viz ABB,EMERSON etc in Installation, commissioning ,after sales support,Project management etc.Specialised ANALYSER ENGINEER.
Completed my Masters of chemical engineering , i have an expereince of two plus years in process engineering.
MECHANICAL+2YEAR APPRIENTIC SHIP IN ROTARY EQUI PMENT
6 years of experience in Process Plant Automation• System Integration of DCS, PLC, SCADA & other Sub systems.
6+ years experiance
4 years of experience as a Process & Operation Engineer in the oil refinery, food processing and pharmaceutical industries.
An Instrument & Control System Engineer in the Petrochemical Industry with management and hands-on experience driving plant enhancements, maintenance, upgrades in processes and controls, Project Management, and vendor negotiations.
Eleven (11) years of very sound technical proficiency as a Sr. Piping Designer / Piping Designer in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area¡¦s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping stations
Facilities Project Engineer - Oil/Gas
Chemical engineer. 19 years experience in ammonia, syngas, Hydrogen, HyCO Plants
A Bachelor of Science in Electrical Engineering and a Bachelor of Science in Mechanical Engineering graduate, a license Electrical Engineer with over 18 years experience in power plant operations, testing and commissioning of coal fired thermal power plant and nuclear power plant.
Having 15 years of extensive experience for Planning & Scheduling work in Petrochmeical & Oil Industry.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   [ 45 ]   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com