Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #48764
next resume »»
CONTACT INFORMATION:
View contact information...
EDUCATIONAL QUALIFICATIONS
Professional
: NACE Certified Coating Inspector Level 3 (#9662)
February 2005 National Association of Corrosion Engineering Texas USA
: AWS Certified Associated Welding Inspector (ACWI) (#08110924)
October 2008 American Welding Society – USA.
: SSPC Certified Protective Coating Inspector (#26747)
December2008 Society for Protective Coatings USA
: ACA Certified Corrosion Technologist (#264)
June2008 Australasian Corrosion Association – Australia.
: NACE Basic Corrosion
June2007 National Association of Corrosion Engineering Texas USA
: ASNT Level II in RT, UT, PT, MT
September 2004 American Society for Non Destructive Testing
Academic
: B.Sc (Chem)
July 1988, University Of Pune- India
: Diploma In Business Management
April 1991, University Of Pune- India
: Masters In Management Sciences (MMS) in MIS
May 1993, University Of Pune - India.
Technical
: Diploma In Mechanical Engineering
August 1992, Board Of Technical Examination Bombay- India.
: Diploma In Surface Coating Technology
November 1984, Board Of Technical Examination Bombay - India.
Computer
: Advance Diploma In Computer Software & System Analysis
November 1999, Board Of Technical Examination Bombay- India.
Extra Curricular: "Gold Medal" In Wrestling Competition Held At Goa
Activities December 1983.
Captain Of Wadia College Volley Ball Team
1983 To 1985.
Completed Nation Level Mountaineering Course At Manali
August 1987.
Award for Volunteer for South East Asian games Doha Qatar
December 2005
Industrial Trainings: H2S & BA Training: NGL – Qatar Petroleum – Mesaieed,
Safety: Qatar Gas – Ras Laffan, Qatar Petroleum – Dukhan
Defensive Driving – Qatar Gas – Ras Laffan
Scaffolding Supervision Safety - Veloci International Doha Qatar
Confine Space Entry – Safety Training
PTW: Permit to Work (PTW) - NGL – Qatar Petroleum – Mesaieed
Qatar Gas – Ras Laffan
EXPERIENCE
Total Experience (24 Years)
(Freelancing ) From 1998……………………
Last Assignment: CHIWAN SEMBAWANG ENGG. CO. LTD. SHENZHEN CHINA.
(From Jan2007 – July 2008) Coating Consultant / Coordinator.
AOKA MIZU FPSO PROJECT (M-206)
Fabrication of Buoy and Turret of the Aoka Mizu Fpso Tms.
Main Contractor: Blue Water Energy Services B.V.
WOODSIDE ANGEL PROJECT (J–198)
Polychloroprene riser Project
Client: Shell Global Solution International B.V.
WOODSIDE ANGEL PROJECT (J–198A)
Sub Sea Structure
Client: Shell Global Solution International B.V.
FABRICATION OF SOFT YOKE MOORING PROJECT (M-196)
Main Contractor: Blue Water Energy Services B.V.
Client: Conocophillips China Inc., China National Offshore Oil Corp.
JACKET CONSTRUCTION FOR WENCHANG (J-195 / J-190)
Client: COOEC China Offshore Oil Engg. Co. Ltd.
FABRICATION OF JACKET, BRIDGES & FLARE TOWERS FOR USGIF Project (J-212)
Client: ADMA (Abu Dhabi Marine Operating Co.)
Consultant: Worely Parsons ; Main Contractor: Hyundai Heavy Industries Ltd.
JACKET CONSTRUCTION MONTARA DEVELOPMENT PROJECT FOR COOGEE (J-213)
Client: Coogee Resources Co.
Consultant: Worely Parsons
WOODSIDE PLUTO PROJECT (J–226)
Jacket Structure for Offshore riser Platform for LNG
Lead / Direct the team of inspectors to get work done as per Quality Manuals / ITP, Co-ordinate with clients & third party inspectors, Solve the Quality Problems, Make feasibility study to use alternative material, process to reduce cost and enhance quality.
Previous Assignment: VELOSI CERTIFICATION SERVICES LLC ABU DHABI UAE
April 06 – Dec 06 Inspection Engineer / Coating Inspector.
Working on the following Project as Third Party Inspection Engineer / Coating Inspector
Inter Refinery Pipeline Project: Client TAKREER (Abu Dhabi oil refining co.) EPC Contractor: DODSAL PTE LTD
Working for inspection Heat shrink sleeves / Casing, Insulation, FBE coating, 3 P layer Coating, Field weld joint Coatings. Special Inspection technique used is Thermo graphic inspection method. Monitoring & inspecting the process of PU insulation on the on the coated pipes.
Previous Assignment: BUREAU VERITAS INSPECTION LLC QATAR
(Three Months) Coating Inspector.
Worked as a Third Party inspector on Off Shore Project (PS-2) For maintenance painting contract Client: QATAR PETRLOUM Contractor: INECO LLC
Platform maintenance, well head jackets.
Previous Assignment: KEMCO COATING & SCAFFOLDING CO. WLL QATAR
(Two Years) Sr. Project Engineer
Working on the following Project as Project / Inspection Engineer / Coordinator
Qatar Petroleum Refinery (QP- NODCO) - Scaffolding / Painting inspection
NGL - Scaffolding / Painting inspection
Rasgas (On Shore / Off Shore) - Scaffolding / Painting inspection
Qatar Gas – Scaffolding / Painting inspection
Qatar Petroleum (Dukhan) – Scaffolding / Painting inspection
Doha Municipal Work – Painting of various Swage water treatment Tanks
Qasco - Scaffolding / Painting inspection
Qapco - Painting of various treatment Tanks
Qatar Steel – Plant Painting / Scaffolding work
Qatar Petroleum - (Jetty, Berth) Maintenance Painting / Scaffolding inspection
Qatar Shipping Co. (Q-Ship) – Painting of various Ship, Off Shore Rigs, Sub Sea pipe lines
Responsibilities
Estimation of the project, Resources Planning, Execution of the project, Resolve Technical Problems, Inspection, Co –Ordination with clients, Sub Contracting, Marketing etc.
Previous Assignment: Reliance Petrochemical Plant Hazira Gujrat India
(6 Years)
Work includes Survey of the Coating Condition in the various plants, electronic storage proof (Photograph), intensity of failure, failure analysis, remedies, cost analysis, time/manpower calculations etc. By enhancing the life of coating reduction in the cost of maintains coating. Training to the Sr./ Jr. Managers /Engineers, Review of the specifications, collecting & recording the various data related Coating / Corrosion. Analysis & interpretation of the data
Previous Assignment: Al Dhanube LLC Dubai UAE
(3 Months)
Consultancy for setting of wood coating UV cured coating to door panels continuous production line.
Employment
From July 1997: INTERCARE LTD. SHARJAH (U A E)
Apr 1998 worked as Operational head
Worked for Protective & Decorative coating in onsite & shop Coating Process. Shop Coating Process: Powder Coating, Fusion Bonding Epoxy Coating & Liquid Coating Process.
Site Coating: Various petrochemical equipment coating works, Bridge Painting works, Renovation of Sharjah Conational Hotel
From Dec 1996: INTERMETAL LTD. SHARJAH (U A E)
Apr 1997 Worked As Plant In charge.
Worked on Powder Coating plant for decorative purpose. Various types of furniture coating & Painting work. Zinc & chrome Plating.
From Dec 1989: INTERVALVE (I) LTD. PUNE (INDIA)
Dec 1996. Sr. Engineer
Responsibilities include Coating, assembly, testing, packaging of Butterfly valve, Check valve & various types of valves used in Oil & Gas refineries, Process industries.
From May 1985: SHIRKE STRUCTURALS LTD. PUNE (INDIA)
Dec 1989 Worked As Jr. Engineer
Working on Powder Coating plant for decorative purpose. On window & door frames.
From Apr 1984: BAJAJ AUTO LTD. PUNE (INDIA)
Oct 1984 Worked As Trainee Asst. Engineer In Paint Shop
Working on liquid Coating plant for 2 wheelers
From Jan 1983: JEMCO PAINTS. PUNE (INDIA)
Jun 1983 Worked As Trainee supervisor
Worked in Paint manufacturing unit trainee Supervisor.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 51 to 100 of 7039)
Go to Search Parameters...
Brief Description
Degreed electrical engineer with many years of experience in instrument engineering for oil production and refining, government facilities, water and wastewater facilities and nuclear sites.
CORROSION SPECIALIST & CHEMISTRY LECTURER
Operations engineer for oil and gas, shallow wells: drilling and workovers, projects evaluations.
Summary21years practical working experience in engineering design including in offshore and onshore and oil project.I worked at refrigerator, trawler,tanker,scientific and container ships.My professional experience has given me an in-depth knowledge of the El.Engineering in Marine/Petroleum branch
Oil Gas and Chemicals
Pipe Stress Analysis planning and detail studies, static analysis of piping systems, including: refractory pipe, jacketed pipe, High / Medium Temperature and Cryogenic piping connected to pumps, compressors, turbines, fire heaters, storage tanks & pressure vessels; underground pipeline.
Highly Experienced Crane and Lifting Engineer
Controls Engineer
Licensed Professional Engineer, performance oriented, with 25 years of extensive broad-based experience in multidisciplinary projects in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering, Procurement and Construction
Over 35 years of diversified experience as an instrumentation and control system /electrical power distribution engineer for petrochemical plants, refineries, synthetic rubber, carbon black plant and oil and gas fired power plants. Provided engineering expertise in the areas of project admin.
Free!
I have over 35 years experience as an Instrument and Electrical Engineer in the Refining and Petrochemical Industries. I graduated in 1973 from the University of Louisville with a Master of Engineering with Specialization in Chemical Engineering degree.
Senior Cost Estimator with 20 years of progressive hands-on experience in petrochemical, oil and gas, and consulting engineering industries. Experienced in IPM Aspen Tech; Q-Estimate, Aspen Tech Kbase - ICARUS-2000, Exxon Estimating System, LULO Software - Venezuelan Commercial Cost Software, and SI
I am communicative, hard working. I easily integrate in new working and social environments as I have excellent communication skills and I am very open minded and flexible, I am responsible, ambitious and a real team player. I totally agreed and follow the HSE policy.
20 years experience with over 15 years of experience in design, engineering, and project management in the petroleum, and petrochemical industry. Successfully worked in different roles in oil industry in his 20 yrs career – engineering, project, and operation.
Professional Mechanical Engineer, Gas Pipeline Engineer, Metering Station Engineer, Project planning and Control Engineer, Project Engineer, Drilling Engineer, Project Manager
Principal Structural/Project Engineer with 16 years exp. in Oil & Gas Structures and Heavy Civils/Bridges. Worked in America, UK/Europe and Africa. Very diligent and precise but practical in appraoch. With a MSc in Engineering and PhD in Business providing excellent management and leadership skills.
Well site geologist or geologist operation
I have 20+ years of experience finding hydrocarbons in basins across the world; mainly through acquiring, processing and interpreting 2D and 3D seismic data and working together with geologists, engineers and landmen to put together economic drillable leads.
I wish to apply for the Full time post of Geologist, presently I am working as a Assistant Professor in Geology department of Poona College of Art’s, Science and Commerce, Camp, Pune ,Maharashtra affiliated to University of Pune, past 21 years at graduate level. During teaching Structu
I am 29 years experienced in HSE arena. It is Included in Oil and Gas, Petrochemical, Lamp Manufacturing and Gas Turbine Repair Shops.
Mechanical engineer with experience of the complete construction process of petrochemical plant from basic design to testing, commissioning, start up and final hand over. Having also a detailed knowledge and sound experience in the maintenance of petrochemical plants.
20 years experience in major integrated national oil company of India. Experience in production operations, process development, enhnaced oil recovery projects and research work related various operations of the company.
Instrument and Controls Engineer
Over 18 years total experience in design engineering, process systems, field engineering, project engineering. This includes design and specifications, chemical process analysis for Process Technology units, strong skilled in water treatment process. Proficient in the use of: AutoCAD, Microsoft Wind
Metallurgical Engineer, Metallurgsit
Economic and Reserve analysis, acquisitions, reservoir engineering in California heavy oil and Appalachian Basin natural gas
Process Engineer with 20 years of experience in EPC and operating companies
PROJECT ELECTRICAL ENGINEER
Structural Engineer • PROFILE • Demonstrated design experience in structural steel and concrete - Energy/Power and Oil/Gas industry. • Diverse heavy construction experience in buildings, pre-casting, bridges, highways, dams, estimation and bidding for construction projects. EDUCATION MS. Structur
Sr. Project Engineer/ Project Manager
3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies.
More than 10 years of experience coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore/onshore and subsea industries.
Petroleum engineer with over 23 years of oil and gas industry experience, including over 14 years of drilling fluids engineering in Romania, Middle East (offshore and onshore), Canada offshore (Terra Nova project) and onshore (Western Canada), Alaska, India and 9 years with Romanian drilling
Experienced oil & gas geoscientist in exploration, production and business development
I am a seasoned, experienced geophysicist/geoscientist & explorationist, and am updated with the latest technology, with in-depth experience in geophysics, as well as geology. I seek a suitable position in oil & gas G & G.
Free Lancer Nace Certified Coating Inspector, SSPC Certified Protective Coating Inspector, AWS Certified Welding Inspector, ACA Certified Corrosion Technologist 24 years of exp. in Coating field. Third party experience in Petro Chemical Industry for last 12 years
Instrumentation and electrical , DCS , PLC
HYSYS/PROII/NGL/LPG/LNG/SYN GAS - CONCEPTUAL, FEED AND DETAIL - REFINERY, NATURAL GAS, CRYOGENIC PROCESS, SOUR GAS REMOVAL, ADVANCED PROCESS CONTROL (APC), GASFICATION (BtL, CtL and GtL). DISTILLATION AND REACTOR. HYSYS/PROII/ Distillation/Separation Sequence/Pinch Analysis.
22 years experience in maintenance , compressor , generator , pump , drilling equipment , machine shop service , manufacture , inspection service , production , wire line , fishing tools , welding work , commissioning.
Condition Monitoring, Reliability Engineer
Pipeline, Piping & Mechanical Equipement design and construction support
Worked in exploration, production and academia
Pressure vessel design engineer, Proficient with: SolidWorks, Inventor, Pro/E, AutoCAD, Algor, ANSYS, COSMOS, Matlab, Compress Codeware, Intuitive ERP; Proficient with ASME Code VIII, Div. 1 & ASME Code VIII Div. 2, B31.3; kill at using the knowledge in WRC107 & WRC279
Highly skills reservoir engineer with 18 years E&P experience and a Masters in Petroleum engineering Degree. Experience includes reservoir simulation, water flood design and management, EOR techniques, Heavy oil development, reserves evaluation, well test design and analysis & reservoir management
19 years experience in the Oil Industry with both service company & operators in UK, Oman, Australia, Brunei, Saudi, and Malaysia. Experience in Field Development Geology and geocellular modeling.
Position: Senior Instrument Engineer / Qualification: Master of Science (Electronics) - Queen’s University of Belfast
Professional Engineer with 19+ years of experience in engineering and project management, including design, sizing, and specification writing of various static and rotating equipments.
A seasoned completion/well intervention/well test professional with 18 years of experience with expertise in sand control, intelli.
the position of Chemist and subsequently to put my contribution for the growth and development of the company by utilizing my best efficiency and skills and to achieve my further career advancement opportunity.
Experienced Principal/Senior Control Systems Engineer who can contribute significantly to your company.
First
1
[ 2 ]
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com