Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #48874 next resume »»
CONTACT INFORMATION:
View contact information...

Quantity Surveyor / Planner (Mechanical)

EDUCATION
Punjab Board of Technical Education, Lahore, Pakistan
Diploma of Associate Engineer (Mechanical) 1989

COMPUTER KNOWLEDGE
* Microsoft Office
* Primavera Project Planner 3.1 & 4
* M.S Project

MEMBERSHIP
Member Canadian Institute of Quantity Surveyors (CIQS)

LANGUAGE: English, Urdu

YEARS OF EXPERIENCE: 14

FIELDS OF EXPERIENCE
* Preparation of Bills of Quantities and Bills of Materials Piping / Mechanical / Structure from drawings.
* Preparation and compilation of Technical / Commercial Bid documents including Manpower & Equipment deployment schedules, Project schedule, Method Statements and Organization charts etc.
* Sub contracting.
* Invoicing.
* Prepare project Plans on Primavera Project Planner and resource loading.
* Prepare Level-I & Level-II Schedules for Bidding purpose.
* Project Progress monitoring & preparation of daily, weekly & monthly progress reports.

EXPERIENCE PROFILE

UAE
Company: Al Jaber Energy Services
Project: Head Office Mussaffah, Abu Dhabi.

From 22-12-05 Todate
Position: Quantity Surveyor

Responsibilities:
1. Preparation of Bills of Quantities & bills of materials for Bidding.
2. Preparation & raising of inquiries for materials & subcontracting works.
3. Estimations of Manpower, Equipment, Material, Consumables & other Costs for bidding.
4. Preparation and compilation of Technical / Commercial Bid documents including Manpower & Equipment deployment schedules, Project schedules and Organization charts etc.
5. Preparation of Level-II Schedule for Bidding purpose.

Company: Descon Engineering
Project: Worked on Following Projects

* ADDW works (Descon Work Shop) Ruwais, Abu Dhabi
From 21-07-05 To 24-09-05

Position: Quantity Surveyor
Responsibilities:
1. Preparation of Bills of Quantities & bills of materials for Bidding.
2. Preparation & raising of inquiries for materials & subcontracting works.
3. Estimations of Manpower, Equipment, Material, Consumables & other Costs for bidding.
4. Preparation and compilation of Technical / Commercial Bid documents including Manpower & Equipment deployment schedules, Project schedules and Organization charts etc.
5. Preparation of Level-II Schedule for Bidding purpose.

* Unleaded Gasoline / Low Sulphur Gas oil (ULG / LSGO Project, Takreer Oil Refinery, Ruwais, Abu Dhabi).
On Supply with Aljaber Grinaker – LTA
From 25-10-04 To 20-07-05

Client Name: Technip-Coflexip
Scope of Work: Erection of complete plant including Civil, Steel Structural Mechanical, Piping, Electrical & Instrumentation works.

Position: Quantity Surveyor
Responsibilities:
1. Preparation of Extra work Invoices for Piping, Mechanical, Steel Structure and Painting / Insulation.
2. Verification of Invoices submitted by Subcontractor.
3. Progress monitoring of Insulation / Painting works on Piping / Equipment and preparation of Daily & Weekly Progress reports.
4. Coordination with Subcontractor for expedition of Progress.
5. To update the Release status of Piping & Equipment for Insulation / Painting.

* Shut Down works of OGD-1 Train-III Dehydrators and Tube Cleaning of Cooler 37-E-102 (Gasco, Habshan, Abu Dhabi).

From 02-10-04 To 24-10-04
Client Name: Abu Dhabi Gas Industries GASCO (Habshan).
Scope of Work:
- Unloading & Loading of Alumina, Mol.Sieve UI-94, Mol.Sieve and BTM Ceramics in 4Nos Dehydrators.
- Tube Cleaning of Coolers from Bay-1 to Bay-6

Position: Shut Down Planner / Quantity Surveyor
Responsibilities:
1. Preparation of separate Shut Down plans for both jobs, resource loading and S-Curve generation.
2. To update the Plan on daily basis.
3. Preparation of Daily progress Reports.

* Ethane Recovery Maximization Project (Gasco, Habshan, Abu Dhabi).

From 05-2-04 To 01-10-04

Client Name: Fluor Mideast Limited.
Scope of Work: Erection of Air fin coolers, Compressor, Demethanizer and associated Piping, steel structure and E&I works.

Position: Quantity Surveyor / Planner
Responsibilities:
1. To Prepare the Bills of Quantities and Bills of materials of Piping, Steel Structure and Equipment from drawings and enter in to Project Control System (PCS).
2. Preparation of progress Invoices.
3. Verification of Sub Contractor's Invoices.
4. Project Progress Monitoring on PCS.
5. Prepare daily, weekly & monthly Progress Reports.
6. To update the Primavera Plan on weekly basis.

* ADDW works (Descon Work Shop) Ruwais, Abu Dhabi

(Partially served while working on ERM Project, Habshan

Position: Quantity Surveyor Planner
Responsibilities:
6. Preparation of Bills of Quantities & bills of materials for Bidding.
7. Estimations of Manpower, Equipment, Material, Consumables & other Costs for bidding.
8. Preparation and compilation of Technical Bid documents including Manpower & Equipment deployment schedules, Project schedule, Method Statements and Orgaograms etc.

PAKISTAN
In Pakistan I have worked on following Projects.
Company: Descon Engineering Limited.
Project: Sui Gas Compression Project Phase III (Sui Gas Field, Pakistan)

From 29-11-02 To 20-08-03

Client Name: Foster Wheeler Energy Limited, UK.
Scope of Works: Induction of HP Compressor, Knock out Drums and Air Fin Coolers for Up gradation and associated, Piping, Steel Structure and E&I works for all 6 trains.

Position: Quantity Surveyor Planner

Responsibilities:
1. To Prepare the Bills of Quantities and Bills of materials of Piping, Steel Structure and Equipment from drawings and enter in to Descon Project Management System (DPMS).
2. Estimations of Manpower, Equipment, Material, Consumables & other Costs
3. Preparation of progress Invoices.
4. Verification of Sub Contractor's Invoices.
5. Project Progress Monitoring on DPMS.
6. Prepare daily, weekly & monthly Progress Reports.
7. To update the Primavera Plan on Monthly basis.
8. Preparation of Shut down Plans of all Trains on Primavera Project Planner.

Company: Descon Engineering Limited.
Project: Engro Turnaround 2002

Client Name: Engro Chemical Pakistan Limited.
Scope of Works:
- Replacement of 3 Nos. Exchangers in Ammonia and 2 Nos. in urea along-with piping replacement and modification
- Replacement of 2 Nos. lean solution pumps and piping modifications.
- Replacement and modification of trays inside both urea reactors.
- Misc. modification in piping and structures in catacarb section.
- Removal / reinstallation of absorber and striper vents for maintenance.

Position: Planner / Quantity Surveyor
Responsibilities:
1. Preparation of Shut Down Plans on Primavera.
2. To update the Plan on daily basis.
3. Shut down progress monitoring and preparation of Daily progress reports.
4. Preparation of Bills of Quantities.
5. To prepare and submit Invoices to client.
6. To prepare work orders for Sub Contractors and verify the invoices submitted by Sub contractors.

Company: Descon Engineering Limited.
Project: ICI Soda Ash Debottlenecking Project.

From Nov-2000 To Nov-2001

Client: ICI Pakistan Limited.
Scope of work:
- Installation of Finishing Machine, Strong gas Scrubber, Kiln Gas Scrubber and associated piping, structure and E & I works.
- Installation of Ash packing machine, Light ash Conveyor and associated structure and E & I works.
- Installation of pumps in Brine manufacturing area and installation of piping.
- Laying of under ground piping from Brine manufacturing unit to plant area.

Position: Quantity Surveyor / Planner
Responsibilities:
1. To Prepare the Bills of Quantities and Bills of materials of Piping, Steel Structure and Equipment from drawings and enter in to Descon Project Management System (DPMS).
2. Estimations of Manpower, Equipment, Material, Consumables & other Costs
3. Preparation of progress Invoices.
4. To prepare Work orders for Subcontractors.
5. Verification of Sub Contractor's Invoices.
6. Project Progress Monitoring on DPMS.
7. Prepare daily, weekly & monthly Progress Reports.
8. To update the Primavera Plan on Monthly basis.

Company: S.A.R Engineering Limited (work Shop)

From 1996 To 1999

Position: Associate Engineer (Mechanical)
Responsibilities:

1. To study in detail, the Fabrication Drawings and Specifications of Equipments like Heat Exchangers, Condensers, Tanks etc.
2. The Estimation of Costs like material, consumable, manpower and other overheads.
3. Planning & Scheduling the fabrication and machining works.
4. Daily progress monitoring of fabrication works.
5. Cost controlling by controlling manpower and other resources.
6. Quality control Inspections of fabrication works of Equipments.
7. Estimation and arrangement of material for above jobs.

Company: M.E.C Engineering Limited (work Shop)

From 1994 To 1995

Position: Associate Engineer (Mechanical)
Responsibilities:
1. To study in detail, the Fabrication Drawings and Specifications of Equipments like Heat Exchangers, Condensers, Tanks etc.
2. The Estimation of Costs like material, consumable, manpower and other overheads.
3. Planning & Scheduling the fabrication and machining works.
4. Daily progress monitoring of fabrication works.
5. Cost controlling by controlling manpower and other resources.
6. Quality control Inspections of fabrication works of Equipments.
7. Estimation and arrangement of material for above jobs.

Company: Descon Engineering Limited.
Project: Cement Expansion Project

From 1993 To 1994

Client: Associated Cement Wah Cantt.
Scope of work: Erection and Commissioning of new Cement plant including major mechanical and E&I Works.

Position: Quantity Surveyor
Responsibilities:
1. Preparation of bills of Quantities and bills of Materials from drawings.
2. Estimations of Manpower, Equipment, Material, Consumables & other Costs
3. Project Progress monitoring and preparation of Daily, weekly & monthly Progress reports.
4. Document controlling.

Company: A.E.C (Pvt) Limited.
Project: ICI Powergen Project

From 1993 To 1993
Client: ICI Pakistan Limit
Scope of work: Erection of new Furnace oil Generators and associated piping to increase the power generation capacity

Position: Technical Assistant
Responsibilities:
1. Preparation of Bills of Quantities and bills of Materials from drawings.
2. Project progress monitoring.
3. Preparation of As built Isometrics.

Company: Aquater Spa of Italy.
Project: FFC-2 Expansion Project (Fauji Fertilizer Company)

From 1991 To 1992
Client: Fouji Fertilizer Company
Project: FFC-2 Expansion Project.

Scope of work: Construction of new Ammonia & Urea Plants Including all Mechanical, Civil and Electrical works.

Position: Painting / Insulation Assistant.

Responsibilities:
1. Planning of Painting and Insulation works on Piping / Equipment after reviewing the plans of Mechanical completion.
2. Implementation of above plans by Sub contractor.
3. Coordination with Sub contractor for execution of the job.
4. Calculation of Quantities.
5. Verification of Invoices submitted by Sub contractor.

Company: AEC (Pvt) Limited.
Project: FFC-2 Expansion Project (Fauji Fertilizer Company)

From 1991 To 1991
Client: Aquater Spa of Italy (At FFC-2 Expansion Project)
Scope of work:
- Fabrication & Erection of Steel Structure for Main pipe rack & Compressor house.
- Erection of Tanks including Ammonia tank.
- Electrical works.

Position: Technical Assistant
Responsibilities:
5. Preparation of bills of Quantities and bills of Materials from drawings.
6. Project Progress monitoring.
7. Verification of Quantities submitted by Sub Contractor
8. Document controlling.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1751 to 1800 of 7054)Go to Search Parameters...
Brief Description
I finish my contract in South Africa as Safety Advisor on “Polaris” Barge (Acergy) for his dry dock. I obtained my master's degree (Engineering and Chemical safety) in 2003. My career really started In 2005 in the off-shore, on the drillship “Pride Angola” where I sailed for 3 years.
I am an instrumentation and automation engineer with over 5 years experience in oil&gas, refinery and petrochemical fields, covering detail design and site installation/ precommissioning/ commissioning activities.
B-Tech in mech with 7.5 years of experience in plant design arena
Eletrical enginer for 8 yrs experince as chief enginer
Civil Structural Engineer
I have near eight years experience in field of piping design of refinery, oil and gas with position as piping lead engineer & assistant manager, furthermore I am fluent PDS, PDMS, Smart Plant Review, Plant Design Review, AutoCad, Microstation, Microsoft office, etc.
weldin inspection
Having a Diploma in Mech. Engg. with 18 years of Experience in Designer
Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.
I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.
Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring
Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company
15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.
18 years experience in process design of refinery and petrochemical units.
Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.
A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.
I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.
Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre
Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.
More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.
A well rounded drilling personnel with a unique experience in drilling and completion / work over operations
Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.
Quantity Surveyor/Estimator (Mechanical)
All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.
Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction
Primavera , MS Project
A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.
Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.
i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.
I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.
ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.
I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures
Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.
7 years experience in Mechanical maintenance
- Good at English and drilling software.
16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).
GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS
Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.
Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).
An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.
HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date
Oil and gas mechanical technician
I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.
Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.
See resume
Resume for Project engineer position
Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC
Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.
Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility
Sr. Drilling & Completion Consultant
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   [ 36 ]   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com