Resume - Any job related to oil/gas & refinery in anywhere in the middle east.

Misco Jobs

Resume #4918

CONTACT INFORMATION:
View contact information...

Career Objective:

To work with an organization having goal oriented approach and provides grooming opportunities.

Professional Experience:

05 years working experience in Commissioning, Planning, Procurement, Materials and Maintenance.

Pak-Arab Refinery Limited (PARCO) Jan.2000 to Date

PARCO is the largest oil refinery ever established in Pakistan with 100,000 BPD refining capacity. The plan is a process of M/s. UOP & detailed Engineering by JGC.

Working as a Standardization Engineer (Material Control) on CMMS (Computerized Maintenance Management System) software-MAXIMO for the following:

* Check and complete specification of each stock items
* Provide store codes to stock items as per 10 digit MESC (Material and Equipment Standards and Code) code numbers
* Standardization of general stock items to minimize stock inventory by standardizing specification
* Physical inspection of items and equipment for additional information in material catalogue
* Inspection of indented material according to specification and standard (ASME, ASTM, API, etc).
* Technical review of quotations for specifications
* Study of homologue items
* Preparation of necessary approval for procurement of stock items as per company procurement policy
* Indigenization of parts / material in local market and coordinate with various organizations for research and development

Turn Around-2002

First turn around was carried out in October-2002 after an operation of 24 months for 25 days only.

Pre Turn Around Activities:- Being maintenance planner following activities was done:
1) Conceptual Planning
Conceptual preparation started after receiving job lists from different departments.
* Coordination Meetings on fortnightly basis started for assigning the responsibilities.
* Material list of spares prepared for the turn around.
* Preparation scope of work
* Budget and cost estimation done
* Estimated time of arrival for the material and spare calculated.
2) Optimization Planning
* Scope of work optimization
* Resource optimization
* Execution methods optimization

Turn Around Activities:- Turn Around started on 1st October 2002 five days earlier than the schedule, due to Power Failure.
Following major jobs attended during TA-2002 in 27 days only.
* 44 Nos. Tube bundles of water cooled exchangers replaced
* 88 Nos. process heat exchangers cleaning carried out
* Inspection and repairing of crude distillation column (100-V9)
* Inspection and repairing of vacuum distillation column (110-V1)
* catalyst replacement of Naptha Hydro Treating Reactor (200-R1)
* Refractory repair in scot line heater (820-H51/52)
* Maintenance of cooling tower (925-T1)
* Inspection of Boiler F.D. Fan Steam Turbine (940-C1AST)
* Calibration of PSV's
* Modification jobs.
Post Turn Around Activities: After successful TA-2002 completion and smooth start-up of Plant following activities carried out:
* Contractor's De-Mobilization
* Unit house keeping
* Critique Meeting
* Post turn around analysis by different departments
* Vendors report and recommendation
* Returning of un-utilized material

During PARCO Mid-Country Refinery Project

Pre commissioning and commissioning activities which includes:

I. Lay out plan of mechanical and electrical workshops
II. Installation and commissioning of Balancing Machine (CEMB), Heavy duty Lathes Machines, Milling Machines, Grinding Machines, Argon Welding Machines, (provided by GEMCO) Mobile compressor (DENYO) alongwith vendors.
III. Development of system for Maintenance Planning, Preventive Maintenance, Breakdown Maintenance, Shutdown Maintenance, Predictive Maintenance.
IV. Involved in installation and commissioning of 94 nos. Air Fin Coolers, AFC's (FBM-Hudson)
V. Inspection of Furnace refractory work, burners, convection section, ducts and dampers of different units.
VI. Installation & Commissioning of SSU (Sulphur Solidification Unit).

Sheikhoo Sugar Mills. Ltd. Dec 1998- To Dec 1999

Sugar Mills with 400 MT crushing capacity of sugar-can per day.
Worked as a Tr. Shift Engineer in operation and maintenance of following:

* Dual Fuel (Baggas / Furnace Oil) water tube boilers (40 Kg/cm2 – 80 Tons/hr.)
* Boiler feed water centrifugal pumps
* Conveyor belts for baggas and sugar-can
* Steam turbine driven Mills
* 40 Knives steam turbine driven Shredder

Qualification:

B.Sc. Mechanical Engineering from U.E.T. Lahore in 1998 with Honors (Aggregate above 75% marks)

Computer Literacy:

MAXIMO- CMMS (Computerized Maintenance Management System)
Primavera Project Planner (P3), M.S. Project
Microsoft Office, AutoCAD, Fortran.

Trainings:

* Three days workshop on Vibrotechnics and balancing.
Venue: PARCO-Mid Country Refinery Mechanical Workshop
(Site – Mehmood Kot)

* Two weeks training on "Shut Down" of MEK-II unit by M/s. PARCO.
Venue: National Refinery Ltd.
(Karchi)

* Six Weeks practical training on Urea, Ammonia and Nitric Acid units.
Venue: Pak-Arab Fertilizes Limited
(Multan)

Personal Profile:

DOB: 4th November 1974
Religion: Islam
Marital Status: Married

Note: Reference can be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3901 to 3950 of 6445)

Go to Search Parameters...

Brief Description

Static Equipment Design Engineer with good knowledge in the design of Static Equipments like pressure vessels etc. in accordance with ASME Sec VIII Division 1.

B.Tech. (Chemical Engg) NIT/REC India; MBA (Finance) 2~3 yrs experience in Project Management

Marine 1.Engineer Officer Certicate, 8 years experience with mechanical maintenance and as a watchkeeping engineer in the engine control room

Conversant in handling of sophisticated chemical engineering process design simulator, (HYSYS 2006;etc).

Piping using CAESAR II, AutoCAD etc & MS-Office B.Tech Mechanical

Up to (10) years experience in oil and gas industries at onshore and offshore fields for coating of steel structure, vessels, storage tanks, equipment, pipelines, offshore fixed platforms and single buoy mooring.

Planning Engineer, Certificate of degree Dr. of Philosophy

Oil/Gas Refinery Safety Supervisor/Engineer

Over 14 years experience in Quality Assurance / Quality Control (QA/QC) activities with various reputed organizations in different Projects. Familiar with ASME, API, AWS & other international codes and standards. Highly energetic, motivated, dedicated professional with strong communication and team

Hardworking, responsible, career oriented, highly motivated, independent and trustworthy

Experienced and innovative Reliability maintenance engineer with technical leadership in operation and maintenance activities, quality achievement, reliability, efficiency. High level of management skills with outstanding leadership and training /monitoring skills.

Masters degree qualified, Previous experience as a QA/QC Engineer on a gas plant and pipeline laying project, looking to move into upsream operations preferably drilling and completions engineering or facilities engineering

Petroleum Engineer

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

Four years of professional experience with international engineering companies. System-level knowledge of PLCs, HMI Packages, Controls Programming and Electrical Design. Hands-on experience with object-oriented software simulation, design, implementation and verification techniques.

a chemical engineering graduate (B.Sc) and presently doing a masters degree in oil and gas engineering at the Robert Gordon university Aberdeen.

I would like to apply as a Geologist/ Petrophysicist. I am an post graduate from Indian Institute of Technology, Mumbai, in Geoexploration. I have experience of about 2 years in open hole log evaluation, during my employment with Schulmberger Asia Services Ltd.

Assigned to carry out preventive maintenance of 415 Volt electrical and motor control and plant lighting and building lighting. Familiarized with various electrical wiring and switching socket for computer supply. Wiring motor control for single phase and three phases.

Good knowledge in Maintenance of Oil/Gas and Refinery equipments and procedures.

i am working as electrical supervisor in wapda pesco and lokking to go abroad my cv is attached.

Diploma In Mechancial Engineering+NEBOSH Level-3+Post Diploma In Industrial safety Management+Environment, Health and Safety Management Specialist Certification course from NASP of USA/14 years experience in Oil&Gas as HSE Advisor/Engineer/Officer/coordinator/

Instruemntation with Spc.in DCS/PLC/SCADA & metering system

: 25 Years experience inLicensor selection for SRU / DCU/ HCU /FCCU/ DHDT/CRU units

Senior Instrumentation Supervisor / Engineering Planner with SAP R3 experience

Quality, Environmental and Occupational Health & Safety Management Systems specialist, ISO 9001:2000 Lead Auditor, Quality Circles, Six Sigma, Use of Statistical Tools, Training, Auditing etc.

Razan Saleem Naman

Control & Instrumentation Engineer with 17 years of experience in Projects, Manufacturing, Operations, Technical

I am ready for use - I do not like office job only offshore or onshore hardworking zone

BBA Graduate, Diploma In Industrial Electronics, Simatic S5 Plc, Modicon Quantum, WinCC, Viewstar2000' Instrumentation, Capability Of Designing Various Control System, Good Knowledge Of Computer

Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)

Experienced in running a safe, productive, team based work place and the use of maintenance planning and recording computer systems. Have knowledge and understanding in heavy equipment and shop maintenance. Excellent in heavy equipments electronic engine, hydraulic and electrical troubleshooting.

Mechanical Engineer

I just finished bachelor of applied in petroleum engineering degree and seeking an entry level position in petroleum engineering. Your engineer in training position would perfectly prpeare me a carrier in drilling and completion engieering. I am flexible to travel any where in the world.

Civil Engineer with an experience of 15+ years in IT area, managing, supervising, consulting and delivering IT solutions for the Oil and Coal Industry. Knowledge and experience in strategic planning, project management, e-learning, and Process Reengineering. Good HR activities and knowledge

Experienced in plant O & M(power plant/LPG Terminal),execution of expansion/greenfield projects,material procurement,tendering/contracts management as well as statutory compliance

Proficient in the use of specialized engineering software includes AutoCAD2006, Tekla Structures (X-Steel), STAADPro2005, ETABS (CSI software) PCA Software (PCAbeam, PCAcolumn & PCAmat), and Profis (Hilti Anchor Bolt design software). Has basic knowledge in frameworks (PDS).

Experienced Project Management Professional (PMP) looking for a Project Manager position with your professional organization

I have 14 years experience as Electrician in Oil and Gas Company. I am a high motivated person and hard working. Currently I still work with Unocal Indonesia Co. as a technician. I am able to work under pressure and quick adapt with working in team or individual.

Operation Geologist with 5 year experiences.

Experienced in Reservoir Simulation, focussed and goal oriented, Natural Gas Engineer

Qualified Petroleum engineer

I am very competent in my field as a geologist/geoscienentist highly trained at one of the best schools in the world (Imperial College London) also competent with advanced software and computing systems. I have a good background of team work and a sound knowledge of the risks, politics and dynamics

System Engineer, IT Specialist

I am a highly motivated young engineer, flexible and mobile. I am self-confident but able to adapt myself to an interdisciplinary group or an integrating team.

I am specifically looking for automation – Instrumentation related job.

Seeking a position as a Petroleum Reservoir Engineer/Technician

Graduate Mechanical Engineer with five year Experience in Engineering Company

To Work in the Field of Design And Managing the Development Of Electronic Systems in Dcs (Distributed Control System) and Scada Where I Can Enlighten My Knowledge in Instrumentation And Electronic Areas such as Plc Programming And Applications, Slc5/04 (Allen Bradley, Siemens ), Communication Syst

Technical/ Managerial, Computer literate, Proficient in MS Office 2000, and engineering related software.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 [ 79 ] 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out