Resume - Petroleum engineer with 28 years experience. Primarily field exploitation but in...

Misco Jobs

Resume #4926

CONTACT INFORMATION:
View contact information...

Swift Energy, New Plymouth, New Zealand July 2002 - Present
Consulting Reservoir/Production Engineer
Hired by Swift Energy to evaluate their New Zealand properties and make recommendations as to how production and reserves might be optimized.

*Prepared depletion plan for the TAWN production area. Recommended rapid acceleration in compression plans and a reconfiguration of the existing gathering system to allow the introduction of gas lift to all oil well completions.

*Prepared depletion plan for RIMU production area. Proposed fracture stimulation on one well and a successful plunger lift application on another. Assisted in reserves reassessment and suspension of several unnecessary facility projects.

*Assisted in strategic planning for all producing properties.

*Monitored well performance and recommended procedures to optimize production and increase recovery.

BP (ARCO), Jakarta, Indonesia July 1998 – April 2002
Reservoir Engineering Specialist
Seconded to VICO Indonesia as a production/reservoir engineer working for the Nilam Asset Team. At the time the Nilam field was producing over 650 mmcfd from 192 wells and over 900 reservoirs.

*Responsible for preparing all workover/recompletion programs and AFE's.

*Identified zones that were missed during routine G&G correlation/mapping processes. As a result 2 wells that were proposed for abandonment were successfully recompleted (these wells have made over 2 bcf gas, current production is over 6 mmcfd).

*Identified and prepared programs for numerous through tubing recompletion opportunities.

*Assisted in efforts to develop a better petrophysics model.

*Coordinated effort to reconcile well/reservoir performance to geologic interpretations. Ensured consistency between Landmark Openworks data (geology) and Schlumberger FINDER data (production).

*Worked closely with Geoquest and VICO asset team members to resolve data base integrity issues (clean up), established data relationships and guided the data migration effort.

*Recommended the first 7" monobore completion in Nilam. Staged reservoir blowdowns from this well have increased recovery and helped improve field deliverability.

*Introduced Landmark Stratworks as an engineering tool to optimize wellbore utilization.

*Anticipated overload on MP pipeline system. Recommended the installation of another pipeline and additional manifolding. This project was put on a fast track and completed in record time.

UNION TEXAS PETROLEUM, Jakarta, Indonesia Sept. 1993 – July 1998
Sr. Reservoir Engineer
Seconded to VICO Indonesia as a reservoir engineer for the Badak Field. At the time this field was making over 850 mmcfd from 181 wells and over 370 reservoirs.

*Identified weaknesses in VICO's existing database and helped set the course for an upgrade to Geoquest's FINDER data base model.

*Upon arrival VICO had 2 workover rigs in the field. Quickly got up to speed preparing programs. In the process changed the company's approach to workover candidate selection focusing on underutilized, high potential wells instead of idle, low potential wells.

*Discovered significant flaws in VICO's production allocation methodology. Oversaw necessary program modifications.

*Created an excel spreadsheet to quickly model performance and calculate the minimum rate for continuous liquids removal. This information was used to designate the appropriate pressure system and production priority for every completion.

*Introduced a campaign for extensive use of cased hole RFT's. This data has greatly enhanced VICO's ability to manage 1300+ reservoirs.

*Identified rigless opportunities and worked with national engineers on program preparation and implementation.

UNION TEXAS PETROLEUM, Houston, TX Dec 1991 – Sep. 1993
Sr. Staff Reservoir Engineer
Corporate reservoir engineer for Pakistan and various non-operated properties. Performed basic field studies, compiled corporate reserves and budget updates.

UNION TEXAS PAKISTAN, Karachi, Pakistan Jan. 1988 – Dec. 1991
Manager Facilities Engineering
Responsible for establishing a strategy for the development of new fields within the Badin Concession area. Evaluated development options, prepared AFE's and interfaced with partners and the government to get projects approved.

*Developed a model (in Excel) to calculate Badin Concession gas deliverability as a function of time and delivery pressure. Model included 12 fields and accounted for gathering system, reservoir, completion and facility performance.

*Conducted a study, which resulted in the upgrading of a facility (from 30 mmcfd to 60 mmcfd).

*Introduced the concept of a satellite field development, in lieu of individual field facilities. Put 5 fields on production (at a savings of +/- $20 mm).

*Brought to management's attention the fact that productivity was constrained by domestic market demand. Assisted in developing a strategy for Pakistan's first oil exports.

UNION TEXAS (SOUTHEAST ASIA), Houston, Texas May 1986 –Jan. 1988
Manager Tiaka Task Force
Coordinated the activities of a task force which was created to determine the commerciality of a discovery off the coast of Sulawesi, Indonesia.

*Oversaw drilling and testing of a delineation well.

*Guided reservoir modeling efforts.

*Established development assumptions and ran project economics.

*Prepared documentation requesting a moratorium on commerciality.

UNION TEXAS PETROLEUM, Houston, Texas Oct. 1984 – May 1986
Drilling Engineering Supervisor
Engineering supervisor for a newly formed Offshore Division. During this period UTP had long-term contracts on a semi-submersible (SEDCO 601), a jackup (KEYES 303) and a land rig.

*Prepared and oversaw preparation of AFE's, drilling programs, workover and completion programs, drilling optimization and engineering studies, cost reduction studies etc.

*Ensured all company and government regulations were being followed. Filed necessary permits with MMS and other regulatory agencies.

UNION TEXAS PETROLEUM, Lafayette, Louisiana Feb. 1981–Oct 1984
Sr. Petroleum Engineer
Performed reservoir, production and drilling engineering functions within assigned areas. Calculated reserves, monitored field performance and prepared procedures for all drilling/completion operations.

*Recommended, designed and participated in execution of a packerless completion design for deep (17,000-20,000 ft) high pressure (up to 13,500 psi FTP) wells in South Louisiana. Designed and oversaw the installation of 2 small production facilities.

TRANSCO EXPLORATION CO., Houston, Texas June 1979–Feb. 1981
Sr. Production Engineer

*Monitored well performance. Prepared workover/completion procedures. Gravel packed numerous offshore wells requiring 13.0-14.0 ppg calcium bromide.

*Served on an information systems planning task force assigned to identify and evaluate the effectiveness of existing business information systems and helped lay ground work for the establishment of a new data sharing system.

UNION OIL OF CALIFORNIA, Houma, Louisiana Sept. 1975–June 1979
Offshore Area Production Engineer
Started out as a trainee working 7/7 in the field, spent 6 months on drilling rigs (onshore and inland waters) and +/- 1 year on offshore production platforms supervising snubbing/coiled tubing operations.

*Prepared AFE's, cost estimates and procedures for well workovers/completions in assigned areas.

*Responsible for bringing all offshore platforms into compliance with the revised OCS Order 8 and API RP14C (platform safety systems).

EDUCATION
Colorado School of Mines, Golden, Colorado
B.S., Petroleum Engineering, 1975

Industry Courses
Modern Completion Practices - Halliburton (2 weeks)
Well Completions/Workovers - Rike (1 week)
Gas Lift Theory/Nodal Analysis (1 week)
Advanced Reservoir Engineering - Wattenburger & Assoc. (1 week, 2/83)
Surface Production Operations & Equipment - Rike (2 weeks, 5/89)
Drilling Operations - Triton Engineering (1 week)
Introduction to Reservoir Simulation - IHRDC (1 week, 6/92)
Pressure Transient Analysis - Dr. Lee (1 week, 8/88)
MMS Basic Well Control - NL Industries (1 week, 1/85)
Human Resource Management - UTP (1 week)
Project Evaluations - UTP (1 week)
Pressure Transient Analysis - Smith, Cobb & Assoc. (1 week, 5/93)
Learning StratWorks - Landmark (1 week, 4/98)

COMPUTER SKILLS
Computer literate with practical experience in Microsoft Word, Excel, Powerpoint and Access. Proficient internet skills. Basic knowledge of Landmark Stratworks. Have used several nodal analysis packages (WEM, SNAP)

Nationality; American
Date of Birth; 13-June-1952

References will be provided on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 6397)

Go to Search Parameters...

Brief Description

DCS system engineering design, configuration, installation & commissioning.

Take up Senior Corporate Management Level challenging position with multi-million Heavy industries

Develop and evaluate fire hazard analysis,various types of fire protection/detection and suppression systems, scope development, review of deliverables, identify user interface requirements and project coordination

Polyester, Nylon,extrusion,plant management, manufacturing, sales

Experienced, proficient and highly qualified Senior QA Engineer/Manager, able to provide 30 years of QA and QC experience in a wide range of disciplines within the oil and gas sector. Would consider a long term posting (if possible) in the UAE, Malaysia, Thailand, Singapore, Japan or Vietnam.

Dear Sir, I am looking for a job.Thanks for your email,

Over 30 years in oil and gas pipeline inspection. Welding and NDE CSWIP 3.2 CSWIP RT UT MT + ATTO

Petroleum engineer with 28 years experience. Primarily field exploitation but includes drilling, production, reservoir and facilities. Overseas for 14 years working on properties in Pakistan, Indonesia and New Zealand. Able to work under conditions with little support staff or management supervision

I have a Bachelors degree in Chemical Eng with over 20 years experience in Safety, Chemical Plant Operations and Process Engineering in multi national chemical companies like EXXON, Ciba-Geigy, & Shell. Presently working as Senior Process Safety Engineer with a leading company in Saudi Arabia

M. Tech (Electrical Engineering) Over 17 years experience in Design, construction and commissioning in Oil & Gas, Petrochemilcal and Power plant

32+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Drilling Engineer . I worked as a well site-drilling engineer, drilling supervisor, operations drilling engineer, drilling superintendent and promoted to drilling engineer specialist, after receiving PhD in Operations Management

Mechanical Engineer (degree) having over 24 years experience in Planning and Maintenance in large petrochemicals, oil/gas facilities. Specialized in Maintenance Planning and CMMS (Maximo).

I am a qualified Electrical engineer with a vast exposure of more than 21 years in the field of Detailed Engineering ,Operation /Maintenance,Erection/commissioning,Testing etc in search of a suitable job in UAE,Qatar,Oman

Sr. Piping/Hvac Designer with over 25 years of experience with a solid 3D modeling experience mainly in AutoCad. Currently studying Cadworx at home using a tutorial from Cadworx.

Mechanical/Petroleum Engineer with 20+ years of experience in artificial lift applications encompassing ESP and PCP (mainly Progressive Cavity Pumps). Development of programs to select PC Pumps and automation/controlling of PC Pump Systems based on surface data such as axial load and/or torque.

Principal Process/Facilities Engineer and Project Engineer/Manager Bachelor's Degree Chemical Engineering University of Oklahoma 1976 and MBA Studies Registered Professional Engineer American Institute of Chemical Engineers Gas Processors Association

Control, Safety Systems and Instrumentation Design / Maintenance / Operations Engineer

EXPERIENCE:Experienced in the design of the following systems: Fiscal Oil and Gas Metering,Offshore / Onshore,Fire & Gas/ESD,DCS, SCADA ,Telecommunication,Compressor Anti-Surge,Subsea Controls,Thruster Controls,Ballast Controls,Dynamic Positioning Systems,Hydroacoustics,Winch Controls.

oil exp. crude/ refinery all aspects field and office

Operator controlroom

Pipeline Engineers, Project Engineers, Project Managers

Fifteen Years working experience on various tankers, out of which eleven years of working experience as 2nd Engineer with Shell Shipping.

I have 13 years experiance in QA/QC inspection field , i working as Piping & Structural Inspector in various projects

13 years exp electrical engineer in T&D of Power sector

Skilled drilling engineer with more than 12 years experience for offshore drilling operation - Immediate available

Instrumentation and control Engineer with following Skills: Honeywell TDC 3000,ABB AC800x,Allen Bradely Panel View,Siemens S5 & S7,Various Field Devices

a very energetic, dynamic and analytical minded person. work with less supervision, written and spoken english are very good. i am trustworthy and dependable person and possess interpersonal relationship ability. have good working relationship with colleagues and superdinates. can handle stress

Free! Drilling Engineer, 10 years experience, hpht experience, Casing design, advanced well design, drilling fluids, directional drilling, drilling software,

I have 17 years of experience and presently working with Saudi International Petrochemical Co (Sipchem). I have got specialized Skills in maintenance planning and scheduling work process control, CMMS SAP R/3 PM module, Primavera P3 / MS project, RCM, Development and implementation of maintenance

Seeking A Challenging Overseas Position in a professional org MSProj & Premevira

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

A highly experienced and versatile project management and professional engineer with over 15 years of engineering and project management experience in the Oil and Gas industries. Extensive experience in various types of oil and gas projects.

Working with Multinational Oil Company HALLIBURTON WORLD WIDE LTD, in Pakistan as a Senior Service Leader.

B. Tech in Metallurgical Engg, 27 years experience in Corrosion & Inspection function in refineries

Senior Piping Designer with experience through both contract and direct work assignments, with major emphasis in the areas of Specialty Chemicals, Pharmaceuticals, Petrochemicals, Sulfur Recovery, Heavy Industry, Gas Turbine & Power Generation.

B.sc Petroleum Engineering, Model 204, SAS, Oracle, Oil and Gas Database Conversion, Production Engineering, Reservoir Engineering, Supported Petroleum Engineering application (Pipeflow, Pipesim)

Senior Petroleum Engineer with long experience in Oil & Gas Industry

Experienced LNG & Petrochemical plant commissioning and maintenance activities in Electrical field. Petrochemical and Utility plants instrumentation experience is an additional experience

14 years of project experience including as Sr. pipeline engineer and piping engineer as well have experience as senior pipeline designer and piping designer including 4 years of experience in supervising a team of designers and draftsmen. Design and drafting experience in various field.

Instrumentation Engineer, Detailed Engineering for offshore, FPSO, oil/gas,steel plants

Mech Engr with 22 yrs exp in power plant projects, working with Thermax Babcock & Wilcox Ltd.

Expert in Industrial Gas & oil separation plants (GOSP), Gas Terminals and Stations.

MANAGEMENT Able to make sound prompt decisions encompasing a diversity of areas: From design and implementation through to resources and progress strategies.

Experience in reliabilty centered maintenance and Mechanical Integrity. Extensive experience with Project engineering.

I introduce myself, i am an Electrical Engineer worked in IRAN under Hyundai Engineerung & construction co. for South pars Field Developement Phase 4 & 5 and before Phase 2 & 3 also.

Mechanical engineer Having Experience in Installation,Inspection and commissioning Rotating equipment and various static and package equipments.Having total 10 years of project experience including 5+ years of experience in Oil & Gas projects

Application for the position as QA/QC personal in Oil/Gas/Petrochemical industries

Experiences: Oil / Gas Field Facilities, Pipeline and Production Plant Operations, Commissioning and start up

Professional Drilling Consultant

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out