Resume - Chemical process engineer with 18 yr's of Up- and downstream Oil & Gas experienc...

Misco Jobs

Resume #49473

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
Problem-solving, Practical, pragmatic personal approach lease enter brief description of your skills and qualifications.

POSITION Principal Process Engineer / Project engineer

EDUCATION AND COURSES
University of Delft Msc chemical engineering
SIL classification course 1st part, ABB
PBNA - "Safety 1 & 2" certificate
Fire fighting and Survival at Sea

LANGUAGES READING WRITING SPEAKING
English Proficient Proficient Proficient
German Fair Fair Fair
Dutch Proficient Proficient Proficient

SYNOPSIS
Several years of experience in conceptual, basic and detailed process design in the field of on- and offshore Oil & Gas installations and pipelines, refinery, petrochemicals.

* Thoroughly knowledge of flow sheet modelling (PROII, Hysim,) feasibility and optimisation studies with regard to energy, networks, safety and risk analysis.
* Hydraulic analysis with Pipesim and Pipephase
* Consulting clients on process and operations issues as a study manager for feasibility and environmental issues
* Contribution in HAZOP and SIL classification studies

Herewith I refer to the attached list for more details regarding my experience in numerous duties and projects.

PERIOD COMPANY / POSITION DUTIES OR PROJECTS

EXPERIENCE
1998 KH-Engineering b.v./ Pr. Process Nerefco Refinery Europoort
– Present Engineer/ Project Engineer Project: Side entry mixers for the tank pharm
Duties: Process design data and equipment specifications for the side entry mixers
Project: Corrosion inhibitor injection skids for equipment and piping in the CDU – and VDU area
Duties: Provide Process package for the construction of chemical injection skids to provide a TAN higher than 0.3.
Project: FCCU Regenerator and reactor unit modification project.
Duties: Intermediar between proprietor and mechanical department
Project: Design and Construction of a Caustic neutralization skid for Refinery Sour water streams
Duties: Process design package from start through construction phase

MOL Danube Refinery Hungary
Project: Detailed design of a new NExTAME plant including etherification reactors and fractionation unit.
Duties: ProII simulations and preparation of process
Datasheets, PFD's and P&ID's.
Project: Detailed design of the Prime G+ unit, deep hydrodesulfurization of a FCC gasoline.
Duties: ProII simulations and preparation of process datasheets, PFD's and P&ID's. control valve and relief valve datasheets

Shell Pernis & Moerdijk Netherlands
Projects: Revamps and engineering troubleshooting facility studies from scouting through basic and detailed engineering till construction phase on the complex.
Duties: Acting as process - and project engineer
Project: Project management services for a
Regenerative catalytic oxidizer unit.
Duties: Acting as process - and project engineer, liaison with vendors, from vendor evaluation and finally selection, Liquid Gas separator check with Shell VSP package
Project: Debottlenecking of a Propene/Propane Splitter.
Duties: Process design and contribution to IPF and
Hazop study.

1990-1998 ABB / Ld. Process Engineer SAGA PETROLEUM Oil & Gas Operator Norway
Project: Optimization studywork for a crude oil separation train and gaslift compression system.
Duties: Process design for basic engineering package setup PFD's and P&ID's for all systems, including blowdown calculations, heatexchanger specifications and vendor checks with HTFS.

Unocal North Sea Offshore
Projects: Modifications for several units on- and offshore facilities (i.e. Methanol recovery, glycol recovery, condensate injection, water injection, gas injection for power generation, Water condensate separation and water treatment).
Duties: Performing process simulations & calculations used as basic data for the Oil & Gas hydraulic Pipeline transport studies. Firewater network analysis with pipenet according NFPA.

SHELL Netherlands
Project: Preparation of a budget estimate for a capacity upgrade within a petrochemical unit of the shell refinery.
Project: proposal phase of a biomass integrated Gasification combined cycle power plant. Major equipment involved gasifier, tarcracker, gasturbine LM2500 GE, STEG unit (Steam generation unit for electricity production) and a wooddryer
Duties: Basic process design work, mass- & heat balance preparation with Gatecycle

On - and Offshore basic and detailed design
The following operators were involved:
Placid oil, Wintershall, Nam AWG; L2-FA-1; L5-FA-1;
Den Helder; Coevorden; Botlek; Elf Petroland
Compression Garijp, Shell Gabon, Bluewater FPSO
Amerada Hess, Amoco P-15D, Unocal, Ultramar J/6A

1987-1989 JOHN BROWN ENGINEERS & Total (TRN), Vlissingen.
CONSTRUCTORS BV / Process Engineer Project: Hydraulic study for an existing refinery
Duties: Development of common relief scenarios, identifying hydraulic constraints/limitations.
NESTE OY
Project: LDPE polymer project
Duties: Heat and mass balances, preparation of utility
P&ID's, line sizing
Shell Gabon
Project: Gas dehydration condensation prediction in pipelines.
Duties: Performing hydraulic analysis with pipephase and pipesim
Project: Flare revamp oil storage tanks
Duties: In - and Outbreathing requirements for according API 2000.
Project: Gathering station debottlenecking study
Duties: Capacity upgrade check of the existing installation
Project Gasturbine exhaust plume emission study.
Duties: Performing Shell Fred dispersion calculations
Project: LPG extraction and gas utilisation study
Duties: Performing R.O.I. analysis
Project: Methanol Extraction and Regeneration system study.
Duties: Process calculations according GPSA
Project: Gas turbine selection study for compressors and water injection pumps
Duties: Performing the process calculations based on the LHV of the gas and vendor data

EDUCATION & CERTIFICATION:
Technical University of Delft department of Chemical Engineering in the Netherlands

ADDITIONAL INFORMATION:
Reference - UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 7054)

Go to Search Parameters...

Brief Description

25 years expereinced project manager / construction manager, project cost control, pipeline and facilities, expereinced in pipeline inspection, facility inspection, non destructive techniques, ASME and CSA. Expereinced in Gas and Oil, responsibility groups of 70 or more inspectors / construction

diploma in chemical technology

I am diploma in Chemical Engineering. I have more than 25 years of experience as a process field and panel operator.

Currently I am Mechanical Technician in the oilfields in Sudan also have many years of experience as maintenance supervisor.

PDMS Structural Designer Offshore Experience

CFS-CV

I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I was involved in several projects on making of hull structure drawings, workshop drawings, lines faring for different types of maritime vessels built in shipyards: cargo vessels, supply vessels, RO-RO, container vessels,

Free! 20 years experience in Control Systems design and drafting. Industries include: Refining, Petrochemicals, Pharmaceuticals, and Brewery. Working knowledge of AutoCad MicroStation, Microsoft Excel & Access, PDS modeling, SmartPlant P&ID, SmartPlant Instrumentation (INtools) and SmartPlant 3D.

Hungarian chief rig mechanic with 30 years experience

Twenty-Nine (29) years of experience, working under various international companies in Middle East, Europe and in South East Asia countries.

A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.

Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.

development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.

PLAN SUPERINTENDENT,PLANT MANAGER.SHUTDOWN MANAGER,MAINTENANCESUPRINTENDENT.TECHNICAL CONSULTANT.COMMISSIONG ENGINEER

Diploma In Civil Structural Engineering, Designer, Detail Engineering, FEED,Oil and Gas, EPC, PDMS, PDMS DRAFT, ACAD, Microstation, Review Reality, Terramodel, Windows (MS word, MS Excel & MS PowerPoint) on Windows NT & 2000 Novell environment

Casing Vibration monitoring and spectrum analysis of Rotating equipment by using data collector & analyzer (SKF Microlog CMVA60) and data manager (SKF PRISM4 1.35 / SKF Machine Analyst 2.2)

Process Engineer with 19 years experience on which 12 years of Project Engineering, and Commissioning in international team environment.

Lead the Project in Oil and Gas in different companies namely CB &I, Ajman, Maersk Oil Qatar, Kvaerner Powergas Mumbai, Tecnimont ICB Mumbai etc.

ASNT NDT LEVEL-III +CSWP+ISO LA+RSO

OSHA 30 - WCS Well Control School

Sr. Electrical Designer with AutoCAD background & some Microstation experience.

A result oriented professional with 11 years experience of quality control, Quality inspection Management,NDT-inspection and CAWI-certificate holder

10 years experience in Design, Operation & Commissioning in Well head facilities, Gas gathering and processing, Gas Compression, Gas Dehydration, Gas Sweetening NGL Production, Crude/Condensate Stabilization, Produced Water Systems Water Injection unit ,Hydrotreaters, Hydrogen Generation Units .

In my 31 years of I&E Design experience I have attained many skills. These include • MicroStation V8 • AutoCAD R2007 • SmartPlant Instr V7 • Intools • Intools • Safety Instrumented Sytems

Piping design autocad microstation ceasarII

Working as Sr.Instrument technician with OXY Qatar. Involved with Maintanenace and commissioning on offshore.

Senior Completions engineer with excellent welltesting skills.

Geoscience consultant for integrated studies, seismic interpretation, reservoir characterization, reservoir geophysics, and interpretive seismic processing.

QHSE + E manager worldwide

Experienced E&P Geologist cum Manager with M.Sc. (Geology) and MBA degrees with over 25 years integrated experience from discovery of new prospect to delineation and evelopment.

Drilling Fluid Engineer having 17 years experience

Thermal Designer Boiler Heaters

I have undertaken the Several Category of Scope & Quantity Verification for Cost Control, Invoice Claim and Change Order Claim to Client. And also, I have undertaken the several Type of Contract ; Fixed Price, Cost Reimbursable and Unit Price.

EDUCATION: B.S., Geology, The Pennsylvania State University, 1985. Experience in exploration, and geophysical well log.

Instrument Engineer with over fifteen years of experience in the Engineering, Construction & Commissioning of Instrumentation and Control Systems for Oil, Gas and Petrochemicals industries. Extensive knowledge and experience in the installation, commissioning, maintenance and trouble shooting of Ins

More than 16 years experience on electrical field

EXPERIENCES IN DESIGN, CONSTRUCTION,REVIEW,QC,PRECOMM AND COMM, COMPLETION ENGINEER

Multi tasking experienced Geologist(MSC.)/ P.Engineer(PhD), looking for positions in geology/ reservoir engineering (even on entry level). I am fluent in many languages, willing to relocate Worldwide, available immediately. Presently living in Canada.

Chemical process engineer with 18 yr's of Up- and downstream Oil & Gas experience

Lead Rotating Equipment Engineer / Lead Packaged Equipment Engineer / Condition Monitoring Senior Specialist

Chief Inspector for Pengrowth Corporation. 17+ years of experience in inspection in NDE, Plant enviroment and field. Certifications include CGSB UT II, MT II, API-510, Studying for National Board exam in December.

valve Inspector,Maintenance Supervisor.Advisor, SME

Experienced Refractory Project Manager / Construction Manager / Consutant

Autocad, Autoplant, Navigator, Navis Explorer, Autoplant Administrator, GTX Rastercad, LFM Modeller/Server, All aspects of Pipe support design, Piping Design Section Leader, Piping codes and standards, MS Access and all windows based software, skilled in all aspects of Piping design & layout.

Twenty-Plus years experience in the design, development, commissioning and maintenance of Process, Batch and Material Handling Control Systems. Experienced in a variety of industries including Petro-Chem, Food, Power Generation, Offshore Production and Land based Drilling.

Boiler Service Manager

Technician in mechanical engineering

With 15 years piping design and construction experience for onshore/offshore facilities, skidded process systems and topsides for clients such as Shell, Petrobras, MODEC, Petronas, BP, Saudi Aramco, Petrokemya, ExxonMobil, Mutineer & Exeter, CNOOC and Qatar Petroleum.

Rotating Equipment Engineeer with 15 yeras of Experience in Oil & Gas Sector

This is Esmaeil Rezaei from Iran and I have 37 Years old. I was graduated form Shiraz University with M.S. degree in chemical engineering. I have 12 years experience in petrochemical company in Shiraz city.

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out