Resume - 21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, plannin...

Misco Jobs

Resume #49752

CONTACT INFORMATION:
View contact information...

EDUCATION: IIT, Roorkee, India (Formerly known as University of Roorkee, India)

Bachelor of Engineering (Industrial Engineering)) 1984
Certified QPMP, Project Manager D level, Switzerland 2003
Emphases in Mechanical/Production Engg., Business Forecast Models, Program/Project Management, Industrial Economics, MIS, Ergonomics, System Management and Risk management structuring.

ADMINISTRATIVE STAFF COLLEGE, Hyderabad, India (Crash Course) 1999
Senior Managers Development Program, "Project Management & Public sector economics"

NITIE, Mumbai (Crash Course) 1991
Develop Sourcing Strategies & Decision support models for "Projects Procurement".

EXPERIENCE: (Total 21 Years)

Throughout my career since 1985 I had been involved in LSTK projects bidding & execution business and contributed significantly in following major areas.

1. Procurement & Contract administration
2. Cost estimation and benchmarking of Proposals.
3. Project management& Cost Control
4 Technology driven business development (Collaborations &MOU signing)
5. Contract formulation (Consortium partnership & Joint Ventures)
6. Strategic Planning and Risk management (Commercial feasibility and Control of Financial parameters/Value drivers of business)

National and International companies with whom I worked and associated in finalization of joint ventures and consortium Partnership:

a) Primarily worked with
i) Since 1997 with Larsen & Toubro Limited, India, EPC Division (Refinery and Petro chemicals) Present Employer
ii) Haldor Topsoe, Denmark (Under manpower delegation from NFL) (1993-1997)
iii) National Fertilizers Limited (1985 – 1993)

b) Associated with major Global Player in partenering /technology for Project bidding/business development:
- Lurgi, Germany (MG-3, Petronas job)
- Toyo, Japan (IOCL-Naphtha Cracker)
- Snam Progetti, Italy (Indo-Oman, Indo-Iran & KRIBCHO Fertilizer project)
- Haldor Topsoe, Denmark (NFL/IFFCO-Ammonia plant, India)
- ABB, Lumus Process and LHT both for IOCL-PNCP job India
- Samsung, Korea (Joint bidding C2C3-ONGC, India)
- Daelim, Korea (EIRP _IOCL India)

c) MAJOR PROJECTS HANDLED/INVOLVED (Procurement, Proposals & Prject Mgt.)

- MG3-Petronas Malaysia (CDU/VDU/L OIL plant)
- Naphtha Cracker Unit
- Disel Hydrotreater Unit
- 1350 TPD Ammonia Plant
- Hydrogen Plant
- 2 * 15 MW Captive Power Plant
- Hydrocracker Unit, BPCL-India-L&T
- Sulphur Recovery Unit (KNPC-Kuwait/BPCL-India- L&T
- Delayed Cocker Unit-IOCL,India-L&T
- PTA, PX1, PX2, - IOCL, India-L&T
- Indo-Iran Qesham Fertilizer Plant
- Ammonia /Urea Plants ( HTAS/Snam Progetti)

d) SUMMARY OF MAJOR JOB RESPONSIBILITIES & DUTIES:
- Single Point responsible for Project Procurement upto delivery at site. (ERP Pkge-SAP used for all project procurement activities)
- Global sourcing & E-Procurement
- Work out Long term understanding with suppliers and contractors.
- Ensure procurement within cost and time and of specified quality.
- Analyze Market trends and bench mark costs
- Identify possible tie ups, explore alternatives &prepare Business Strategies
- Back to Back understanding with Major vendors of Reactors/Compressors/ Fired Heaters and Pumps etc
- Finalize Consortium partnership/ Joint ventures MOUs
- Cost Estimation and work out Pricing strategy.
- Develop Risk & Liability sharing models
- Techno commercial closures
- Arrive on agreement with partners for overall execution plans
- Finalize contract agreements
- Execute/Administer contracts e) Procurement Specific Experience::

* Major Projects handled as Procurement Manager wherein I was responsible to negotiate within transfer price, finalize orders and ensure timely delivery.

Current Responsibility:
- MG-3 Malaysia ( CDU/VDU) /L.OIL plant currently being executed by L&T and Lurgi in Consortium at Petronas, Malaysia
- IOCL- Panipat, India Naphtha Cracker in consortium with M/s Toyo, Japan

During last five years:
- IOCL- DHDT (2 *1.8 mmtpa) project in India
- KNPC-Sulpur projects in Kuwait
- PTA Project at IOCL-India

Prior to Year 2000:
- Ammonia Plant (1350 TPD gas based plants)
- Urea Plant
- Captive Power plants
- DHDS projects
- Sulphur Projects
- Hydrogen plants/Reformers

* Major Items & Vendors (Dealt with for Critical orders)

- Reactors (JSW, Kobe, ATB, NP, Hitachi, L&T etc)
- Reciprocating Compressors (NP, Kobe, Thomason, MES etc)
- Centrifugal Compressors (Ebara, Dresser, NP, Kobe, Borsig, ManTurbo, Siemens etc)
- Turbines (Steam/Gas etc) Elliot, Shim Nippon, MHI, BHEL, Siemens etc
- Pumps (Flowserve, IDP, KSB, Sulzer, Rurr, NP, Ebara etc)
- PTA dryers, crystalizers, and other eqpts.
- Boilers (BWE, MHI, MES, BHEL, Borsig etc)
- HP Heat Exchangers (JSW, IMB, NP, Alstom, L&T, Lugi, Koch etc)
- Fired Heaters (KTI, Fosterwheeler, Petrochem etc)
- Columns/Presser Vessels (Korea, Japan, Malaysia, India)
- Electrical, Instrument, Control systems etc (Global sourcing)
- Other eqpt/systems /Piping etc - Globally

MAJOR AREAS OF INTEREST- Project Procurement & Contract Administration
- Business development/Proposals
- Project Management

POSITIONS LOOKING FOR:
- Head of Deptts.

SALARY EXPECTATIONS: Min 70000 USD per Annum plus free Car, House, Medical etc.

REFERENCES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4301 to 4350 of 6402)

Go to Search Parameters...

Brief Description

PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER

16 years exp. in Design/Drafting, Softwares AutoCad 2004, Microstation J/V8, IRASB, AutoCad Overlay, HVAC system layouts Duct layouts, Equip,Layouts, Utility/Fire prot.sys layouts,Steel Structural detail drgs, Familiar in Int.stands.Exp.in High Rise, Industrial/Commercial Bldgs, Housing, Airports

Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification

CERTIFIED WELDING INSPECTOR, ASNT LEVEL II IN UT,PT, MPT, WORKED IN SAUDI ARABIA, QATAR IN CONSTRUCTION AND SHUTDOWN PROJECTS - OIL AND GAS.

Chemical Engineer with experience in production with a reputed Petrochemical industry as Engineer (Production). Responsible for operation and maintenance of Production section which includes a Hydrogen plant using Catalytic steam reforming process and an Auto-oxidation plant for peroxide.

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

Commissioning, Testing and Maintenance of Generators, static excitation system , Protective Relays, 220kv Switchyard, Power Transformers, 6.6kv Switch Gear 415v Switchgear, 415VMCC

A B.Eng. degree, 2nd class honours (upper division) in Civil Engineering. He has worked with several copamies since his graduation and has acquired experience in his field of study. He is a good team player, honest, hard working and timely.

I'v the pleasure to present my c.v to all your respected well known organizations

An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s

Seismic Data Processing (Up to PSTM, using Promaxtm &Vistatm),Quality control of Seismic Data Acquisition (using Promaxtm & Vistatm).

Interested in knowing available oppurtunities awaiting.

Licensed Land Surveyor 27 years experience

Ten years working experience in the oil and gas industry, dispensing the role of QA / QC Inspector for Piping, Pipelines, Pressure Vessels, Steel Structures and Welding from fabrication and installation to pre-commissioning of oil production facilities, oil refineries, natural gas plants etc.

Principal/Lead Mechanical Engineer; Specialist consultant for rotating equipment; FEED, DBM and detail engineering in EPC; Pumps, Compressors and Turbines. Oil & Gas, Petrochemical, Municipal, Energy, Offshore / Marine

21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india.

Software analyst, Engineer (Piping Design)

I have beenb graduated from electrical and electronic enginnering and then joining Schlumberger as cementing field engineer for three years promoted three times

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Chemical engineer, skilled in water treatment

Analytical, Satisfied by customer servicing and their satisfaction, team member.

Postgraduate in Ocean Engineering looking for postion in offshore and coastal engineering organisation

Mechanical Superintendent.

Seeking a position of responsibilities, Dynamic Challenges and opportunities for Professional Advancement in rapidly growing Competition in the field of Chemical Engineer.

B.sc Mechanical engineer having 3 years experience in multinational petrochemical company as a process engineer since 01 sept 2000 till date

6 years experience as a CAD Drafter/Designer in Electrical & Civil Engineering, specializing in AutoCAD and Microstation. Also have a second Associates Degree in Computer Information Management Systems.

I have completed my degree in BEng Hons in Mechanical Engineering and working in Dadabhoy Cement industries Limited. I am looking for jobs in Oil & Gas sector

C.V.

INSTRUMENTATION ENGINEER, having completed B.E in Instrumentation and Electronics, and Diploma in Instrumentation Technology, with overall experience of 3years, looking for a challenging and rewarding career.

I am Mechanical Engineer with first class career record. I have more than 5 years working experience in large power plant operation and maintenance. I have Boiler proficiency certificate issued by state government of India.

project management.contract management,business management.

4th Class Power Engineering Certificate and 3rd Class Power Engineening Part A1-A2

Seeking Employment in Oil and Gas Industry

BACHELOR OF ENGINEERING in ELECTRICAL AND ELECTRONICS ENGINEERING, EXPERIENCED IN SUBSTATION AUTOMATION AND OPERATION SYSTEM

By profession I am Mechanical Engineer. Presently working as a HSE ADVISOR with an Australian Organisation BHP BILLITON PETROLEUM PTY LTD at ZAMZAMA GAS PLANT Pakistan. I have done various HSE Courses including NEBOSH Certification from UK.

Total of 5years experience in Quality control, Welding, Heat treatment & NDT field a QC in EPC sector

Project enginer with 5 yrs experiece

Self-motivated young competent Mechanical Engineer with nine years experience with Oil companies and leading construction and contracting firms. Have proficiency in independent project execution. Possessing a Diploma in Mechanical Engineering. Able to independently plan, and execute Projects related

Microstation CADD Civil Engineer Utilities Specialist and GIS

A Mechanical Engineer with Masters Degree in Quality Assurance Technology (M.tech).IRCA certified QMS Lead Auditor; ISO 9001:2000, ASNT Level II in RI,MT & PT NDT techniques. Around 20 years professional experience in Manufacturing, Planning and QA/QC disciplines.

Mechanical Engineering Technician, MS Project, Premavera, Auto-CAD, SAP, Microstation, Planning , Maintenance

Skilled in AutoCAD, Microstation, Survey Data Tech

Planning, Scheduling, Primavera, Artemis, Cost, Project Controls, Metrics, Construction Manager, Site Manager

Construction & maintenace of installations, equipment and systems in hazardous areas (explosive gas atmosph.); Maintenance of el. equipment, installations in petrochemical industry.& el. Equip., systems in El.Power Plant ; Training el.personnel for preventive & predictive el. maintenace programs

PDS/piping engineer

A dynamic and energetic B.S. in Petroleum Engineering, experienced in drilling and well completions, with a solid technical background and excellent communications and organizational skills. Able to interact effectively at all company levels, from field personnel to top management.

8 Years working experience as a `Piping Draughtsman / PDMS Designer’.

I Know SmartPlant P&ID Software, 2D Auto Plant, Microstation, Acad Rel14-2004

My job basically involves mainly the operation of Microstation and PDS since I am in-charge of the 3D modeling in most projects. Also I'm involve in making civil drawings and plans using either Microstation or AutoCAD. I'm also knowledgeable in the operation Smartplant Review for checking 3D models.

Certified as PCN ultrasonic testing level II in Plate,pipe,nozzle and node(3.1,3.2,3.8,3.9), PCN Welding inspection 3.1 and ICORR Painting Inspector Level I

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 [ 87 ] 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out