Resume - I have worked in the drilling by more of one year and Develop my career as well ...

Misco Jobs

Resume #5025

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Develop my career as well planner engineer and Support in Surface Logging Systems, constantly learning and updating my knowledge. I also like teamwork because it's the proper way to reach the best results and our mayor objectives. I believe in knowledge, I think that the human being is always open to learn and grow in mind. That's why I always try to learn something from all my daily activities. I want to have the opportunity to work with you to demonstrate to my capacity of professional delivery and the greatness of a motivation outlined towards the success, within the principles of responsibility and honesty. Finally I want to show my availability to move to where it is required, field or another city always following the standards of industrial security and environment care. I try to protect and take care of the earth and nature because I love it; it's our home and our most precious legacy. I appreciate its attention and I hope consider to me for the coming processes of selection.

EDUCATION
America University, Bogotá, Colombia
Enero 1999 to December 2004, graduation day: 12th March 2004.
Petroleum Engineering

Experience
Employer: BAKER HUHGES INTEQ
Position: Well Planner Engineer
Place and Date: Bogota, August/2004 - Actually

Well Planner in Colombia wells, with handling in Advantage systems, Director, BHAsys and Compass-Landmark, special software for this activity.

Activities:
- Prepare pre-liminary directional profile for drilling feasibility.
- Planning and Design of BP directional well profiles, based on offset wells and according to client's requirements.
- Prepare proposal of detailed directional program for the Drilling Operations Team.
- Check well directional behavior on a daily basis. Provide additional support to the Operations Team on Directional drilling issues if required.
- Ensure that all lessons learned are captured, recorded and fed back into the well planning processes.
- Review and input into End of Well Reports-Directional Section.
- Ensure that directional programs and carried out in compliance with Client. HSE Standards and Policies.
- Daily basis to current wells and coming wells. (Update Surveys-Plots- Projections in Directional Software).
- Provide BHA Analysis simulations (Rock Index Calculations in Offset Wells), Torque & Drag (Generate Charts with the Actual Torque and Theorical Values), Hydraulics.
- Prepare BHA Performance by Run.
- Preparation of End of Well Reports within time stipulated by contracts and based on Well Planning & Engineering Competencies.
- Review Operating Conditions in the current wells.

Employer: BAKER HUHGES INTEQ
Position: Office Client Tech-Support
Place and Date: Bogota, August/2004 – Actually

Tech-Support, in the Surface Logging Systems. with handling in Advantage and RigLing Systems, in the Tangara Project with HOCOL S.A. and TOTAL.

Activities:
- Actualization of the information collected by the Mud Logging unit. (Lithologyc Reports as Formation Evaluation Log, others as, Drilling Data evaluation Log, Hole Condition Log, hydraulics, among others).
- Check the monitoring of the real time operation, during the drilling of the well through the software.
- Ensure that all lessons learned are captured, recorded and fed back into the well planning processes.
- Review and input into End of Well Reports-Geology Section.
- Ensure that programs and carried out in compliance with Client. HSE Standards and Policies.
- Daily basis to current wells and coming wells. (Update Plots- Reports in the office client).
- Review Operating Conditions in the current wells.
- Participating in the daily meetings of the client for report of the activity.

Employer: ECOPETROL S.A
Position: Student in practices
Place and Date: Bogota, November 2002 - June 2003

Evaluation of the bottom hole assemblies used in the directional wells in Cusiana and Cupiagua fields in BPO Colombia, with the propose of making and institutional memory that allows besides to document the techniques learned in these fields, wells drilled by Baker Hughes Inteq, to contemplate it's applicability in projects of Ecopetrol or associated.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4601 to 4650 of 6396)

Go to Search Parameters...

Brief Description

I have worked in the drilling by more of one year and Develop my career as well planner engineer and Support in Surface Logging Systems in Baker Hughes Inteq Colombia.

Work in a Petroleum company

Telecommunications, programming, computers, networking, control systems, data communications

I have recently completed my masters in Petroleum Engineering. I have one year experience as a Mechanical Engineer. I have the expertise of cutting edge technology available in the field today. I would be quite willing to relocate internationally, if required.

Given In Resume Body.

Objetivo: aplicar en el área producción, perforación, estudio de yacimientos o petrofísica como Ingeniero de Petróleo.

Young enthusiastic Engineer (B.Tech Hons.;IIT - Kharagpur ) just graduating with 120+ days of field experience in drilling , safety and scheduling. Good computer skills and a diverse course content in college.

Application for the post of Quality Assurance/Control Welding Inspector

B. Tech. Chemical Engineer Diploma in Petrochemical technology 1 year Experience in Reliance Petroleum Ltd.

Extensive engineering career featuring over 17 year’s experience. Proven ability to deliver innovative solutions that serve corporate objects, Project Planning, Project Engineering (Instrumentation), Implementation, Construction, Commissioning, startup and process monitoring Petroleum/O&G projects.

Experience in Collection and processing of Ground Control Points data using Geodetic quality GPS receivers and LGO(Leica Geo Office & TGO (Trimble Geomatics Office)

Procuring of Electrical & Instrumentation and Mechanical Materials/Equipment (Oil & Gas Projects)

PLC,SCADA,HMI,Electrical Technologist

Diploma in electrical & electronics engineering/7 Years Experience in Shipyard/Oil Industries as a Instrument Technician (Pressure/Electrical/Temperature/Flow/Gas Analyser/Hydraulic/Pneumatic Instruments)

electrical engineer with 7 yrs experience

Electrical Engineer with exp in consultancy jobs, turnkey jobs, HT/LT works, HVAC works, Bill checking, estimation, preparration of BOQ, electrification, layouts etc

Failure Analysis, corrosion, MS Office, Visio, Corel

Having exposure in erection, commissioning, operation and maintenance of Utilities & Power Plants like Gas turbines Power Plant ,Wartsila Diesel Power Plants, High pressure steam Boilers , Steam Turbines, Preatment Plants of Raw Water and Chlorination system , Clarifloculators , DM Water Plants,

Sound experience of using various Document control systems and extensive knowledge of computer packages including Word, Excel, WordPerfect, Access, Microsoft Office 2000, Outlook, Power Point, Adobe Acrobat, and Convero.

experience for 20yrs in electronic instrumentation, telecommunication , fire and gas, and electronics

QC senior supervisor engineer - QC senior construction engineer.

Having 9 Years experience in Piping Designing in Off shore & On shore, Rig piping

X-Steel Detailer/Engineer/PDMS Engineer/Detailer

3 years experience in shipbuilding as a piping design engineer. familiar with pipe routing, material estimation, drawing review, production co-ordination and documentation.

Mine Geotechnical Engineer

Business Development, Marketing, General Management - Project and Product ( Chemical Engineer + PG Diplima in Export Marketing)

I have over 25 years experience in QA/QC on petrochem, power and commerical projects. I have a BS in Mechanical Engineering and hold current AWS/CWI, API 510 & 570 and CSWIP/BGAS 3/2 Coatings certifications.

Mechanical Engineer having total 3+ yrs Experience. Out of which 2+ yrs is in Subsea Project Engineering & Oil Field Equipment design and 1+ yr experience in Elevator Design.

Working hard with little supervision either autonomously or as part of a team and learning new products and innovations without need of extensive training are some of my strengths. As an employee and a constructive element, my abilities allow me to successfully execute attractive jobs and opportunit

I’ve total 13 year experience Civil/Structural Field, more than one and half year by using software like PDS and remain in detailing the fabrication drawing by using SDS/2, AUTOCAD and MICROSTATION.I have basic knowledge of PDMS. I have good knowledge of steel and steel connection

My experience includes Design of Piping layout, Equipment Layout. Preparing and checking of Isometrics, Preparation of bill of materials, Project review with client using SPR and NAVISWORKS, Equipment & Piping Modeling in PDS.

Extensive experience in Health, Safety and Environment both in the onshore and offshore projects. Over 15 years practical experience as a field staff and Project Execution Management. Oversee a host of Platform Revamps and Retrofit works, flow lines construction, hot taps and dredging operations.

Offshore mechanical technician/fitter

I'm a Naval Architecture Engineering who compatible in calculating and designing water structure including stability, ballasting, and strength.

Project Controls Manager - cost control, scheduling and estimating

I am very good in petroleum technology & I did my projectwork in petrochemicals.

I am enthusiastic about the chemical treatment in various applications as for corrosion inhibition, protection & mitigation programs, for oil/ water treatment and enhancing oil processing, and for material selections and external corrosion protection by various techniques

HSE MANAGER WITH M.sc environmental sciences and CMIOSH

Instrument Technician / Qc

Mining Engineer and having an MBA with 10 years of industry experience, both underground and opencast, along with financial industry exposure for 5 years

Ingenieur in the Industrial Chemical

Thermo-Energy Engineer

I am presently a PhD student looking for Industry Coop. and Intership

Higher National Diploma (HND) in Electrical\Electronic Engineering (Power Systems Option)

OBJECTIVE: Petroleum engineer seeking a challenging position in a well-known petroleum company.

BSME with EIT certification and 5 months experience at Cargill Fertilizer, Inc.

During the past 7 years I have worked for Foster Wheeler Energy LTD and Fluor Daniel LTD. Including a period of 2 years on assignment overseas in Oman, Thailand and the Philippines. Working both in design offices and on construction sites.

Systems Analyst & IS Security , ERP-SAP BASIS 4.X Administrator

Mechanical Engineering and MBA degree with over 5 years experience in the oil industry with Schlumberger as Field Engineer in Mexico and Venezuela, and as Training Engineer in the USA.

I would like to join a future-oriented company abroad which is developing and carrying out projects in earth science. I'm interested in entry-level job positions (especially in oil-mining-water explorations and well loggings) concerning geophysics or related fields

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 [ 93 ] 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out