CONTACT INFORMATION:
View contact information...
With over 8 years of extensive experience in detailed piping design of oil & gas, petrochemical, refinery, onshore plants. Has the ability to do piping layout/design which include pipe support design, MTO check, generation/checking of isometric drawings (isogen)for fabrication which are based on P & ID/UHD/PFD, Plot Plan, and other Information Drawings in accordance with piping standards & codes. Familiar with ASME B31.3/B31.1 codes. Proficient in the use of PDS (Plant Design System) Intergraph Software for 3D modeling of piping, equipment, operating stage, ladders, stairs & structures and for extraction of isometric/Piping Plan drawings. Well-versed in the operation of both Microstation & Autocad software used in 2D applications. Familiar with SmartPlant P&ID Software, Design Review/Smart Plant Viewer used in Model Review. With over 4 years of overseas work experience particularly Japan & Singapore.
Work Experience:
Present Company: SUT Sakra Pte Ltd(SembCorp Utilities & Terminals)
Position: Piping Designer
Inclusive Date: Feb 18, 2003 – present
Project Name: SembCorp Utilities Service Corridor 3D(PDS) As-Built
Project Location: Jurong Island, Singapore
Duties/Responsibilities
* Responsible for the Piping site and structure as-built survey of the utilities service corridor
* Perform Piping PDS partition development(piping,structural modeling)
* Generate/extract isometric drawings & general arrangement drawings
* Edit/annotate PDS SmartPlant P&ID and AutoCad 2D structure dwgs.
Previous Company: Fluor Daniel Inc., Philippines
Position: Senior Piping Designer
Inclusive Date: April 01, 2002 – January 31, 2003
Project Name: CITGO Lake Charles Conversion Optimization Project
Project Location: Louisiana, USA
Duties/Responsibilities
* Perform detailed piping layout/design of process & utility lines taking into consideration its operability, maintainability, accessibility, cost-effectiveness & other project specifications.
* Pipe support design & selection.
* Perform Piping PDS partition development(pipe/equipment modeling)
* Prepare sketch of Non-standard/special supports
* Communicate & interface with other disciplines such as Civil &
Structural, Control Systems, Electrical, & Mechanical Group during the Detailed engineering/design development phase of the project.
Squad checking of equipment, Structural and miscellaneous steels.
* Self checking of isometric drawings against Master P & ID considering the integrity of the design base on project requirements, material specification, good design philosophy and practice.
Previous Company: C&E CORPORATION
( Joint Venture of Chiyoda Corp. of Japan & EEI Corp.)
Position: Piping Designer
Inclusive Date: September 1995 – March 31, 2002
Duties/Responsibilities
Detailed piping design of process & utility lines for petrochemical,refinery, oil & gas plants which include piping layout, pipe support design, material check, isometric drawing extraction/annotation, vendor check of equipment, generation/annotation of General Arrangement Drawing. Performed PDS piping modeling around pumps, exchangers, furnaces, vessels, towers, AFC's, heaters & other miscellaneous equipment such as filters, silencers & ejectors. Prepare, review & revise Piping HydroTest Packages, documentation of Mechanically Completed TestPackages & handover to Turnover group. Review model for clash check using SmartPlant./Model Review software.
OVERSEAS ASSIGNMENTS
A. CHIYODA CORPORATION
Yokohama,Japan
November 1996 ~ February 1999
April 2001 ~ October 2001
PROJECT PARTICIPATION
1. KERTH AROMATICS PROJECT (PSR PROJECT)
Kerth Terengganu, Malaysia
- Isometric Revision and Annotation using Microstation ( UNIX )
- General Arrangement drawing extraction and annotation.
2. SAUDI CHEVRON PETROCHEMICALS (SCP PROJECT)
Madinat Al-Jubail Al-Sinaiyah
- -Pipe routing using PDS Intergraph based on plot plan, P&ID/UHD and with accordance to piping standards and codes.
- 3d modeling of structure and equipment using PDS Intergraph.
- Isometric and general arrangement drawing extraction using PDS Preparation.
- layout and 3d modeling of small bore piping using PDS.
3. EASTERN PETROCHEMICAL COMPANY (SSP PROJECT)
- Pipe modeling using PDS (Intergraph)
- Prepare information drawing of loading data for pipe rack and sleeper and nozzle orientation using 2D CAD.
- Drawing modification using Microstation.
- GA drawing extraction and annotation using PDS and Microstation.
4. TEIJIN POLYCARBONATE SINGAPORE (TPS-4 PROJECT, April ~ Oct. 2001)
- Selection of standard pipe supports & its locations using Design Review Software.
- 3D modeling of piping, equipment, structure, instrument/electrical cable.
B. KOCJV (KELLOG OVERSEAS CORP. & CHIYODA CORPJOINT VENTURE)
SINGAPORE OLEFINS PROJECT (Jurong Island, Singapore)
April 2000 ~ August 2000
1. SINGAPORE OLEFINS PROJECT (SOP PROJECT)
- Preparation, review and revision of Piping TEST PACKAGES to be used in
HYDROTEST.
- Documentation of the MECHANICALLY COMPLETED Test Packages & handover to the Turnover Group.
DOMESTIC ASSIGNMENT
a. KERTH AROMATICS PROJECT (PSR MOCK -UP PROJECT)
Kerth Terengganu, Malaysia
- Prepare piping layout and isometric sketches.
- Prepare material take off of special materials and piping components
- 3D cad modeling of equipment and piping using Autoplant.
- Extraction/annotation of GA drawings using Autoplant.
b. SAUDI ARABIA YANBU (SAY PROJECT)
Yanbu, Saudi Arabia
- Piping modeling ( 3D CAD ) using AutoPlant software.
- Revise pipe route, equipment nozzle orientation.
- Layout and 3D modeling of small bore piping using Autoplant.
c. Oman Liquefied Gas (OLG PROJECT)
Qalhat, Sultanate of Oman
- Revision of pipe routing based on isometric drawing using PDS Intergraph
- Extraction of isometric and GA drawings using PDS Intergraph.
d. Ras Laffan Gas (RGX PROJECT, TRAIN 3) _Dec. 2001 ~ March 2002
- 3D modeling/revision of piping
- extraction of isometric drawings
- design/routing of small bore piping
COMPUTER LITERACY:
Proficient in: PDS (Plant Design System) Intergraph
Piping, Isogen, Equipment, Drawing Manager
Interference, & Frameworks Modules
Microstation 95/SE/J
Design Review/Smart Plant Viewer
SmartPlant P&ID
Autocad Rel. 14/2000
Autoplant 97
Knowledge in: Microsoft Excel/Word/Powerpoint
TRAINING / SEMINARS ATTENDED
a. SmartPlant P&ID- March 2003
Cintech III - Intergraph Singapore b. P & ID, EE Raceway 2D Applications, March 2000
C&E Training Room – Pasig City, Philippines c. Piping Flexibility Analysis, Feb. 2000
C&E Training Room – Pasig City, Philippines d. PDS Intergraph and Microstation 95, March 1997
Chiyoda Corporation – Yokohama, Japan e. Piping Design and Engineering, September 1995
EEI Corporation Training Center – Quezon City, Philippines f. Autocad R13 Update Training, July 1996
C&E Corporation – Pasig City, Philippines g. Professionalism at Work, May 1996
C&E Training Room – Pasig City, Philippines h. Piping Checkers Training, Nov. 11~22, 2002
FluorDaniel Inc., Phils.
EDUCATIONAL ATTAINMENT:
Bachelor of Science in Mechanical Engineering Mapua Institute of Technology
Gov't Exam Passed: Mechanical Engineer's Licensure Examination
April 1995
I hereby certify that the above information is true and correct to the best of my knowledge and belief.
View contact information... |