Resume - PROJECT/DESIGN ENGINEER FOR FIRE PROTECTION SYSTEM

Misco Jobs

Resume #50362

CONTACT INFORMATION:
View contact information...

Nationality: Egyptian
Date Of Birth: 22 /5/1979- Alexndria
Marital Status: single
Have UAE & Egyptian Driving License

2004-Up to Now, Emirates Fire Fighting Equip. Factory (FIREX) Sharjah-UAE system. Jordan-Al Rabia

Design & Estimation Engineering Dept.
Position: Technical & Designing Manger for fire system
Reporting to: General Manager
ƒÞ Design of fire fighting & Sprinkler systems (Wet system, Dry system, foam system, preaction system).
ƒÞ Testing & Commissioning of Fire Fighting System.
ƒÞ Prepare Quotations of Fire Fighting, Fire Alarm & Sprinkler System.
ƒÞ Estimation of Fire Fighting, Fire Alarm & Sprinkler System
ƒÞ Design of Deluge system (preaction system, water foam system).
ƒÞ Design of Aircrafts Hanger using deluge system (Foam-Water system).
ƒÞ Design of Cooling Spray system for Transformers.
ƒÞ Design of Sprinkler & Fire Fighting system for Fuel & Oil Tanks in petroleum companies.
ƒÞ Design of fire suppression system like FM200 system, CO2 system, KitchenHood system, Automatic Dry Powder system.
ƒÞ Maintenance of Fire pump (Electric & diesel), Reset of Dry valve.
ƒÞ Make Hydraulic Calculation of Fire Fighting & sprinkler system.
ƒÞ Make a periodic maintenance of fire fighting equipment.(Alarm check valve,fire pump,dry check valve,Tamper switch,flow switch,¡Ketc.
ƒÞ Design of Conventional & Addressable Fire Alarm system
ƒÞ Design of Voice evacuation system
ƒÞ Attend the technical meeting with contractor or consultant.
ƒÞ Specifiying our products in the list of the consultant.

2002-2004, Global Est. For Electromechanical & Fire fighting system-Jordan- Al Rabia

ƒÞ Design Of fire fighting & Sprinkler systems (Wet system, Dry system, foam system, preaction system).
ƒÞ Design of FM200 system, CO2 system, KitchenHood system, Automatic Dry Powder system.
ƒÞ. Prepare Quotations of Fire Fighting, Fire Alarm & Sprinkler System
ƒÞ Design Of Deluge system (preaction system, water foam system).
ƒÞ Design of Sprinkler system for Transformers.
ƒÞ Design of Sprinkler & Fire Fighting system for Fuel Tanks in petroleum companies.
ƒÞ Design of FM200system, CO2 system, KitchenHood system, Automatic Dry Powder system.
ƒÞ Design of Conventional & Addressable Fire Alarm system.

EDUCATION
23/09/1997 - 1/01/2002 B.Sc. Mechanical Engineering(Power), Jordan University, (Good) grade, finish the studying within (4.5 years from 5).

1996-1997 Salah Al Deen Secondary School
ƒÞ Tawjihi-Science Branch.- Al Ashrafia - Jordan

LANGUAGE & COMPUTER
* Arabic language, as Native Language.
* English language, Writing, Reading,Coversation.
* Excel, Win Word, Autocad, Fortran, Visual basic.

INTERESTS
Sports like Football, Running.Reading, and Internet.

Some Designs & Projects Done by me:

G+2P+40 Jumeirah lake tarrece with Atkins Consultant.
5B+G+35 Time place tower with NEB Consutant.
FEWA Electricity Substation.
5B+G+36 Global Tower With Atkins Consultant
G+7P+37 Beach Tower With Horizon Eng. Consulatnt.
G+2B+15 Diamond Towers with Conin Consulatnt.
3B+G+M+Poduim+15 RITZ HILTON Hotel With Hyder Consultant.
MOBILE:(+971 50) 8684543 *
E-MAIL- SHARQAWI61@YAHOO.COM

SUMMARY OF QUALIFICATIONS:
------------
Bs.MECHNAICAL ENGINEERING,UNIVERSITY OF JORDAN

WORK EXPERIENCE:
------------
6 YEARS AS TECHNICAL MANAGER FOR FIRE PROTECTION SYSTEM AND DESIGNING ALL TYPE OF FIRE SYSTEM

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 6391)

Go to Search Parameters...

Brief Description

I have 5+ Years Experience in Electrical Field with Multi Discipline Experience in Instrumentation Including Construction, Quality Control, Power Systems, Operations and Maintenance. I have Work Experience in Power Plant, Oil & Gas Industry and Rig Platform & Process Platform in OFFSHORE

Metallurgist/Material Engineer Background, Maintenace & Reliability Experience

Electrical Designer 12-1/2 Years of Exper. Layouts Cable trays/trench, Grounding, Power, Lightings, Tele Communication, Fire & Gas detectors, Multi Cable Transit (MCT) & related supports details. Single Line & Interconnection wiring block diagrams. Power / Instruments, Fire & Gas Cable Schedule etc.

I/E Designer, 28 years experience in the petrochemical industry along the Gulf Coast and in the oil industry in Alaska. Worked onsite at client facilities and in-house. Extensive use of Autocad and MS Office. Experienced in working with other disciplines, clients, vendors & construction. Will travel

PROJECT/DESIGN ENGINEER FOR FIRE PROTECTION SYSTEM

Proven oil and gas manager

Experienced Exploration Geologist with over fours years’ field experience.

Mechanical Engineer, with 11yrs exp, Specialized as Coating/painting engineer implementation of different types of coating techniques, practices, Corrosion control Operations, scheduling and monitoring. Been a Coating Inspector & QC Inspector & NACE Corrosion Inspector - Level 1

BACKGROUND SUMMARY Over 10 years of experience in Piping, Structural, Mechanical, and Civil with experience in 3D modeling, CADWORX and drafting and designing refinery foundations.

DRILLING ENGINEER / TRAINEE ASSISTANT DRILLER, EXPERIENCE - 3 YEARS IN OIL FIELD AS DRILLING ENGINEER

Three years experience as an engineering tech, 10 years experience with data manipulation.

Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.

I have over twenty-five (25) years of experience in the petroleum (upstream - field), quality assurance, program / project management, purchasing / supplier quality, engineering, safety, manufacturing, supervisory (hourly / salary and union / non-union), and management capacities.

qualified to CSWIP 3.1 and AWS CWI, Knowledge of welding Inspection, piping and mechanical inspection.

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Extensive experience and education in mechanical engineering and projects management

PDS Piping designer Engineer

PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities

Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

Construction Mgr.- Piping Eng.

Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist

Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.

v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.

aws cawi

Diploma in Electronics & Comm., Diploma in Electrical Tech., ROV Pilot/Tech

4+ years of experience in civil & structural design and analysis of Offshore structures, Pre-Engineered Buildings, Conventional Buildings, Commercial and Residential concrete structures.

Prepare piping material specifications with the help of MARIAN software. Perform various calculations as per ASME 31.3 for pipe thickness, Miter Bend, Reinforcement Pad. Generation of Essar Commodity code philosophy and assignment of commodity codes to piping commodity.

Instrument technician with 10 years experiance (3.5 years knpc kuwait)

NACE Certified Cathodic Protection Technologist (Level III) - Corrosion Technician

Familliar with CAESARII

Service Engineer / Instrumentaion tech application calibration commisioning

PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.

work in instrumentation,automation,PLC in industrial environments

Process engineer with 5 year experience working in the refining and oil & gas industry. My most recent (and current) position has provided me with overseas experience for an oil producer American company.

Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )

Rotating Equipment Engineer

Rotating Equipment Engineer with 5 years experience in Refinery and Oil and Gas jobs

Working knowledge of Allen Bradley PLC-s, turbine, generator and auxiliary equipment including their interfaces to the control system, Foundation Fieldbus network

Piping Design

Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.

Senior technician instrument

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Well-experienced instrument senior technician seeking a motivating position related to Construction, Commissioning and Maintenance applicable to industrial and OIL&GAS installations.

Offering Extensive Experience in Industrial Electrical/Instrument Equipment

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer

28 years experience in drilling fluids onshore and offshore across 4 continents. Fully experienced in both field engineering and office supervisory/management posts. IWCF Combined Surface/Subsea Supervisor well control certificate.

Working experience in Chemical plants with private sector and foreign organizations. Worked at ¡§Honeywell DCS TDC 3000¡¨ controlled Urea & Ammonia plants, FFC and ¡§Foxboro DCS¡¨ controlled Urea plant, Indonesia.

I know I would be the correct candidate because; I have never met a challenge that I could not solve, resolve, or find a solution to in an accurate and timely manner. I am a quality engineer with over 15 years experience in the automotive field alone.

13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out