Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #50403 next resume »»
CONTACT INFORMATION:
View contact information...

PERSONAL DATA

Name: Firman Hardiyansyah
Date of Birth: June 15, 1962
Nationality: Indonesia
Marital Status: Married

EMPLOYMENT & EXPERIENCE

1. Period: 1st December 2005 till present
Company: Petronas Carigali SDN BHN - Malaysia
Department: Surface Facilities Engineering (DFE/4)
Position Held: Senior Process Engineer
Responsibilities:

a. Simulate process facilities and pipeline hydraulic calculation b. Develop and review PEFS / UEFS (P&ID and PFD)
c. Perform and evaluate HAZOP and IPF
d. Develop and review conceptual design and detail engineering e. Select and specify process equipment f. Develop project scope of work g. Prepares project specifications, requests and evaluates quotations for services and equipment h. Support commissioning and start up team

2. Period: August 2003 till November 2005
Company: Brunei Shell Petroleum – Brunei Darussalam
Department: WOP / 311 (West Operation Support)
Position Held: Senior Process Engineer
Responsibilities:

a. Develop operating envelope for process equipment b. Day to day operation monitoring c. Develop PEFS / UEFS (P&ID and PFD)
d. Simulate process facilities and pipeline hydraulic calculation e. Optimise and trouble shooting process facilities f. Select and specify process equipment g. Perform and evaluate HAZOP
h. Prepares project specifications, requests and evaluates quotations for services and equipment

Experience:
a. Developed offshore Fairley area pipeline network model by Pipesim and Petex.
b. Developed the operating envelop and limit diagram for process facilities at offshore west area platforms (around 20 platforms)
c. Offshore Ampa area flare system review d. Offshore Fairley area pipeline slugging review e. Offshore Fairley area back pressure review f. Flowline erosion limit review g. Performed Five PtL (Producing to the limit) workshops

3. Period: May 2002 till August 2003
Company: Sarawak Shell Berhad – Malaysia
Department: EPK – IMPF (Facilities Engineering)
Position Held: Principal Process Engineer
Responsibilities:

a. Develop operating envelope for process equipment b. Develop and review conceptual design and detail engineering c. Simulate process facilities d. Develop PEFS / UEFS (P&ID and PFD)
e. Select and specify process equipment f. Perform and evaluate HAZOP and IPF
g. Optimise and trouble shooting process facilities h. Monitor the performance of unit operation i. Prepares project specifications, requests and evaluates quotations for services and equipment j. Supervises allocated projects, including testing, performance evaluation and commissioning to ensure compliance with approved specifications and contracts / agreements conditions

Experience:
a. Performed the capacity test for "M3 offshore complex" platform as team leader b. Developed the operating envelope and limit diagram of M3 offshore complex platform c. Performed Instrumented Protective Function (IPF) classification of M3 offshore platform d. Performed technical evaluation for tilted plate coalescer (liquid-liquid separator)
e. Performed dehydration glycol (TEG) losses study f. Developed LP gas recovery conceptual design

4. Period: September 2000 till April 2002
Company: PT Istana Karang Laut (Engineering & Construction Company)
Jakarta – Indonesia
Department: Engineering
Position Held: Design Engineering Manager (Lead Process Engineer)
Responsibilities:
a. Responsible for ensuring that all contractual, code requirements and statutory regulation including those concerned with quality are reflected in the preparation of design and engineering documents b. Reviewing and approving PFD, P&ID, heat and mass balance, safe chart (HAZOP) and data sheets c. Reviewing and approving calculation notes / reports d. Reviewing and approving basic design, detail design engineering and plot plan drawing e. Reviewing and approving operation and maintenance manual f. Directs and supervises the day to day activities of the following discipline of the design engineering department such as: structure engineers, mechanical engineers, process engineers, electrical engineers, instrument engineers, piping engineer g. Technically evaluate all supplier (vendor), specification and drawings h. Updated documentations, design software, codes and standards

Experience:
1. Design and fabrication one (1) package CO2 removal (DEA) 40 MMscfd for Unocal Indonesia.
2. Design and fabrication crude oil facilities plant (capacity 26,000 BLPD) for Kufpec Indonesia at Seram Island
3. Design and fabrication one (1) package dehydration (TEG) 200 MMscfd for Unocal Thailand

5. Period: Feb. 2000 till September 2000
Company: Unocal Indonesia Co.(oil and gas division) – Balikpapan
East Kalimantan - Indonesia
Department: Production
Position Held: Northern Offshore Superintendent
Responsibilities:
Basic function: under the guidance of North Area Production Manager, directs and administrates the Attaka field (offshore) total resources to provide for safe, efficient and economical producing, processing and transferring of crude oil and gas to Santan Terminal (onshore)

Principal accountabilities:
a. Directs and supervises the day to day activities of the following sections of Attaka field: oil and gas production (production well platforms, production/process platform, oil and gas treatment plant, compressor platform), production supports (maintenance), wireline operation, safety and environmental protection b. Responsible for ensuring that the field's expenditure including capital one, is maintained within the limits of the approved budget, which prepares annually together with the establishment's proposals and requests adjustments as required, during the budgetary year c. Has overall control of any emergency at offshore, such as fire or explosion, rupture of pipeline, vessel or tank, oil spill, serious personnel injury d. Be responsible for the development, implementation and follow up of loss control program and ensures that the established goals are met e. Enforce observance of all company's rules / regulations, safety procedures and good housekeeping practices

6. Period: July 1997 to Feb. 2000
Company: Unocal Indonesia Co.(oil and gas division) – Balikpapan
East Kalimantan - Indonesia
Department: Production
Position Held: Santan Terminal Superintendent (Onshore)
Responsibilities:
Basic function: under the guidance of North Area Production Manager, directs and administrates the Santan Terminal's total resources to provide for safe, efficient and economical processing, storage, measurement and loading on to tankers of crude oil and LPG, as well as the distribution of gases to other onshore users

Principal accountabilities:
a. Directs and supervises the day to day activities of the following sections of the Terminal: plant operation (oil production facility plant, liquid extraction plant (LPG), compressor station, metering oil / gas station, and water treatment plant), marine operation (loading crude oil, condensate and LPG to the tanker), production supports (maintenance)
b. Responsible for ensuring that terminal's expenditure including capital one, is maintained within the limits of the approved budget, which prepares annually together with the establishment's proposals and requests adjustments as required, during the budgetary year c. Has overall control of any emergency at the Terminal, such as fire or explosion, rupture of pipeline, vessel or tank, serious personnel injury, crash landing of an aircraft or a ship in distress d. Be responsible for the development, implementation and follow up of loss control program and ensures that the established goals are met.
e. Enforce observance of all company's rules / regulations, safety procedures and good housekeeping practices.

7. Period: March 1990 till July 1997
Company: Unocal Indonesia Co.(oil and gas division) – Balikpapan
East Kalimantan - Indonesia
Department: Production Engineering
Position Held: Senior Process Engineer
Responsibilities:

a. Develop PFD, P&ID, heat and mass balance b. Simulate process facilities and pipeline hydraulic calculation c. Develop conceptual and detailed design d. Develop safe charts (cause and effect)
e. Identify and evaluate process hazard (Hazop)
f. Classify hazardous area g. Take corrective action if there are deviations in process valuable h. Prepares process calculation for equipment (heat exchanger, pressure vessel, pump, compressor, line size / pressure drop, etc)
i. Prepares and review plot plan (layout) drawing j. Provides technical advice and feasibility studies for modifications to production facilities k. Prepares project specifications, requests and evaluates quotations for services and equipment l. Commissioning and start up supervision

Experience:

a. Design, installation and commissioning two units gas dehydration (1 unit at offshore / 150 MMSCFD) and (1 unit at onshore / 25 MMSCFD)
b. Installation, commissioning waste water treatment (onshore / 100,000 BWPD)
c. Retrofit and commissioning one train crude oil process facilities (onshore / 50,000 BLPD)
d. Design, installation and commissioning 2 units vapor recovery (1 unit at offshore / 3.5 MMSCFD) and (1 unit at onshore / 1.5 MMSCFD)
e. Design, installation and commissioning 2 units "Solar" gas turbine - compressor (1 unit at offshore / 60 MMSCFD) and (1 unit at onshore / 160 MMSCFD)
f. Design, installation 2 units fin fan gas cooler (offshore / 12 MMBTU/HR)
g. Design, installation 10 units gas scrubber (8 units at offshore / 20 MMSCFD) and (2 units at onshore / 60 MMSCFD)
h. Design, installation and commissioning direct fire crude oil heater (onshore / 23 MMBTU/HR)
i. Design subsea line (offshore) and onshore line j. Design process facilities for 2 Platforms (60,000 BLPD & 70 MMSCFD)
k. Design and restaging 8 units crude oil shipping pump (offshore / 125,000 BLPD)
l. Design 3 units tanker loading pumps (onshore / 450,000 BPD)
m. Crude oil and gas lines network study (offshore and onshore)
n. Gas processing plant expansion study (onshore / 180 MMSCFD)
o. Prepares project proposals to management p. Project progress presentation at Pertamina (State Oil Company)

8. Period: January 1987 - March 1990
Company: PT. Krakatau Steel (government Co.) Cilegon
West Java - Indonesia
Department: Utilities (air separation plant)
Position Held: Process Engineer
Responsibilities:
a. Monitoring day to day plant operation b. Take corrective action if there are deviations in process valuable c. Trouble shooting process facilities d. Optimize process facilities e. Production control for O2, N2 and Argon liquid / gas Product

Experience:
1. Team leader for turn around air separation plant
2. Design, installation and commissioning refrigeration unit
3. Design, installation and commissioning argon liquid tank
4. Air separation plant expansion study
FORMAL EDUCATION

1981 – 1986: Graduated in chemical engineering (gas and petrochemical) University of Indonesia (UI) Jakarta – Indonesia

INFORMAL EDUCATION & MEMBER

1. Technical, economics and management courses
2. Member of engineering / production team audit for Unocal Thailand
3. Member of Indonesian Petroleum Association (# 3994).

SOFTWARE EXPERINCE

Hysys (Hyprotech), Petex (Integrated piping network, Mbal, Prosper and Gap), OLGA, PipeSim, pressure vessel design, control valve design, PSV design, metering / orifice calculation, "Solar" gas turbine – compressor, pump, storage tank design (COADE)

INTERNATIONAL CODE

API Spec. 5L, API Spec. 6D, API RP 14C, API RP 14J, API 500, API 520, API 521, API 650, ASME B31.3, ASME B31.8, ASME VIII Div. 1, NACE MR0175, NFPA, AGA report 3, TEMA, Shell DEP's.

REFERENCE
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 801 to 850 of 7051)Go to Search Parameters...
Brief Description
Business Analyst Technical Writer Project Manager Programme Director
Take advantage of 30 years corporate experience. I can train your junior staff to become very proficient with Paradigm's GEOLOG 6 software. My specialty is reservoir characterization, with emphasis on probabilistic log interpretation using GEOLOG's Multimin program. Worldwide contracts considered.
Electrical, Control Systems and Instrumentation Engineer: great international experience designing, installing, testing, calibrating, starting up, commissioning, maintaining and repairing industrial electrical, instrumentation and control systems, in the natural gas and others industries.
Senior Engineer with Masters in Business Administration and possessing over twenty-two years of experience in Electrical/Instrument Maintenance and Project works in refining and petrochemical industries.
SAS and COBOL Programmer with DB2 and SQL experience
OBJECTIVE Seeking a challenging position at senior management level in R&D and Manufacturing / Technical Services / Applications Development / Technology Strategy Planning./Project Implementation
Offering MBA Leadership, insightful, analytical, and creative engineering leader successful in conceptualizing and implementing cost-effective solutions and leveraging key advantages in complex environments. Resourceful team builder and project manager adept at building and leading teams.
Over 20 years of Oil and Gas experience using/supporting technical applications for oil companies & vendors (Landmark, Geoquest, and Paradigm). The past 8 years, my focus is on project management, building/leading application support team, workflows, database, data management and GIS solutions.
PDMS Desgn,Draft, Isodraft and Catalogue Creation and MDS supports
ELCTRICAL ENGINEERE
Level 4 scheduling in oil&gas with Primavera
Electrical & Instrumentation Inspector - Broad experience in E&I installation in Fabrication of Offshore Production Platform, FPSO, D.P Cable Laying Vessel and Oil & Gas Refinery Plant. (Knowledgeable in industry standard recommended practice: NEC 500, IEC/NEC 505, API RP14C, 14F.
Instrument engineer
To Carried out overhauling, repairing preventive, corrective breakdown, and shutdown mechanical maintenance, trouble shooting, condition monitoring, alignments, hydro testing, of rotating & static equipments, like pumps, compressors, fin fans blowers, heat exchangers, column, and using all type of
My strengths are my ability to take charge and work well within a team environment and in my experience in developing algorithms from concept phase to commercial implementation
Read blue prints, electrical scymatics, troubleshooting and repairing electronic devices for the industrial sector and wireless communications equipment.
Information Management, Data Management and CAD Systems Management
Over than 9 year experience joint in Oil & Gas industrial. Specialize on inspection, testing and documentation for fabrication, installation structure and piping work for offshore Jacket structure and pile make up, process & living quarters offshore platform, FPSO piping process and floating system,
I have experience in all phases of both electrical and petroulem experience.
Nimr'C' Full field water injection project.
10+ years of combined professional experience utilizing geophysical interpretation, seismic processing, single stack and simultaneous deterministic inversion, 3D geo-cellular modeling, software consulting, training, and development skills. Working knowledge of 3D interpretation techniques, etc.
SDE with very good experience in very demanding working environment; person self-motivated, performance driven, team player, with good IT skills. Experience in FSU and Eastern Europe. Bilingual Spanish– English, with basic conversational knowledge of Russian.
Mechanical Engineer & a result oriented professional with qualitative experience of over 13 years in Cost Estimation, Planning & scheduling and Cost Control in the EPCM & EPIC projects of Offshore and Onshore Oil & Gas, Port & LNG Terminal and Petrochemical plants in Nigeria, India and Middle East
Wellsite Geologist
High school and some collge . worked offshore jack up rig and onshore rigs in oman , Dubai , Abu Dhabi, Kuwait and recently work in Saudi Arab
Sr. Petroleum Management Engineer with extensive diverse experience in Light to Heavy Oil, Oil Shale, Tar Sands, Reservoir, Completions, Production, Drilling, Well Completions/Simulations and Facilities Engineering, and in Offshore, Deepwater, SURF (Subsea, Umbilical, Risers, Flowlines), Terminals,
Free! Nearly 30 years of significant, progressive experience directing teams to successful completion in onshore and offshore drilling.
Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project
Started carrier with Operations and later switched over to projects. For the last 17 years employed as a safety professional mainly in the Petroleum/ Petrochemical field. Expert in carrying out Safety audits/ HAZOP studies and QRA.
Over 28 years professional experience IT and SAP SECURITY
Geoscience expertise from progressively increasing career responsibilities. Management expertise from progressively increasing career responsibilities. Please see resume for details.
Masters in automotive engineering
Senior Hydrogeologist
Production Geologist 25+ years experience. Expertise in Field Development, mature field integration, locating additional infill drilling targets.
Over 25 Years of Extensive Oil Industry Experience in Contracts Administration, Purchasing and Materials Controls. Presently working for the last two years as a CONTRACTS ENGINEER with RasGas LNG Company, Qatar. Seeking advancement and higher opportunities.
Over twenty years experience in oil and gas construction industries
Senior Reservoir Engineer
Total 24 years in various capacities in Oil refinery, Gas processing including Gas Cracker&Petrochemicals with Technical services & commissioning background that covers Process Design, Equipment rating, Troubleshooting, Plant change orders management, Capacity enhancement.
SUMMARY Professional Production Geo-Scientist with 24+ years experience in Geological and Geophysical interpretations. Technical expertise in Oil & Gas Field Development & Exploration, with the use of well logs, core descriptions, sequence stratigraphic & seismic stratigraphic concepts.
B.Sc. in Chemical Engineering (Gas and Petrochemical); 19 years experience in process facilities (more than 17 years in oil and gas industry). The summary of major duty is design, optimization, installation and operation of process equipment.
Overall 20 years experience in Design, Engineering, Project Coordination, Project management, Maintenance of Instrumentation, Analyzers & Control Systems of Major/DBN Hydrocarbon(Olefins) and Polymer(PVC/VCM) projects. Upgrades of DCS, PLC, SCADA, GC, Process Gas & Liquid Analyzers, CEMS A
32 years of work experience and present position senior most lead inst. engineer
Petroleum Engineer, twenty-two years experience, strong analytical Reservoir Engineering on implementing exploitation strategies for petroleum and gas reservoirs, and secondary recoveries techniques. Reservoir description and simulation. Reserves Assessment. Performance production evaluation. Econom
17+ yrs. experience in petroleum engineering from onshore/deepwater offshore (large) oil & (multi TCF) gas fields. Delivering reservoir/production engineering solutions for maximizing asset value by boosting production, well potential & technical integrity and improving overall business performance.
Responsible for generating all detailed design drawing & ensure that all designs are in accordance to Company specifications and conforms to local and international drawing Codes and Standards. Gathering information thru site surveying as per job modification stated in the client scope of works.
Total experience of 12 years (7 years PDS Administration, 2 Year AutoPLANT Administration, & 3 Years as Piping Design Engineer)
An experienced result oriented Corrosion/Material Specialist with a professional background comprising 10 years of research, technical and supervisory experience in corrosion, materials, mechanical, chemical and metallurgical engineering especially on corrosion prevention and control in the oil an
DCS, SCADA, INSTRUMENTATION
Senior Structural Engineer with 12 years experience in offshore structural engineering. Able to lead, forecast and allocate structural engineering resources and possesses conceptual to detailed design experiences in brown and green field projects.
Mechanic specialist
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   [ 17 ]   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com