Resume - Experienced Oil & Gas Project HSE advisor with QA/QC background. Excellent com...

Misco Jobs

Resume #5067

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE OVERVIEW
Oil & Gas construction project HSE Advisor, with background in QA/QC.

WORK HISTORY
May 2004 to December 2004: HSE Advisor, Saipem S.p.A., Baku, Azerbaijan

HSE Advisor for Saipem’s offshore Transportation & Installation team, working for the Azerbaijan International Operating Company (AIOC) developing the Azeri, Chirag and deep-water portion of Gunashli fields in the Azerbaijan sector of the Caspian Sea (Main operator BP).

June 2003 to March 2004: Sub-Project Safety and Security Advisor, East Area Project

Advisor to Mobil Producing Nigeria project management team based at engineering offices in Kuala Lumpur and at gas compression topsides fabrication site in South Korea.
Project involved design engineering, construction, transportation and installation of multiple jacketed platforms including the 18,000T gas compression topsides by floatover, with offshore structural component construction sites in Aberdeen, Newcastle, Malaysia, South Korea, and in Nigeria.

Work activities included:
- Preparing and presenting HSE seminars on client expectations, organizing and facilitating work site HSE assessment workshops, participation in HAZOP studies and formal Risk Assessments, and the preparation and administration of client site plans and procedures.
- Reviewing offshore structure Emergency Evacuation, Escape, and Rescue design.
- Managing client project team HSE and security concerns, reviewing and overseeing development of contractor and sub-contractor plans and procedures.

2000 to April 2003: Safety Advisor, Chad Development Project
Managing project HSE performance to ExxonMobil Development Corporation project occupational health, safety and environmental specifications; a highly sensitive project position requiring interaction with national and local government representatives in a unique regulatory environment and to the satisfaction of World Bank monitoring groups.
Reporting to the Cameroon Oil Transportation Company (COTCO) and Esso-Tchad HSE Managers.
Advising contractors on developing occupational health & safety programs for project construction activities, preparing progress reports and presentations to outside observers.

Responsible for the development and implementation of community road safety awareness campaigns for remote village populations affected by new road construction and vehicle traffic.

Training and supervising nationals of Cameroon and Chad as Construction Safety monitors, and managing compliance monitoring work at multiple worksites spread over more than 1000km of pipeline construction and associated support bases, including:
- Pipe storage yards, new road and bridge construction in remote countryside
- Blasting operations at rock quarry and road construction sites
- Project road, rail, and airfreight logistics operations in Chad and Cameroon

1998 - 2000: Construction Safety Engineer, SAIPEM (S7000)
Managing offshore construction HSE performance aboard Saipem's flagship offshore construction vessel for a number of high-profile projects and company construction activities.

Monitoring offshore construction activities and advising construction supervisors on related occupational safety matters.

Projects include Sable, Oseberg, Troll, EldFisk, Diana-Hoover, and Petronius, with work offshore eastern Canada, Norwegian, Dutch and UK sectors of the North Sea and U.S. waters in the Gulf of Mexico.

Offshore construction activities include ultra-heavy lift operations, offshore facility commissioning, S7000 conversion to J-Lay, and deep-water (J-Lay) pipeline.

Activities include:
- Developing and administering safety training for a multi-lingual workforce
- Managing COSHH assessment program for offshore construction activities
- Developing safe work procedures system based on field Job Safety Analyses
- Managing real-time POB for S7000 construction activities including support vessels, barges, jackets and platforms under construction
- Managing Risk Assessment closeout actions
- Injury, illness and incident investigation and reporting in line with RIDDOR offshore regulations

Other Relevant prior work experience:

Quality Manager, MMI 1998
Managing Quality Assurance and Quality Control for shop fabrication of pressure-vessels for export under ASME 'S' stamp certification.

Quality Manager, Safety Manager, MBB Power Services 1989-1998

Managing Quality Assurance and Quality Control under ASME 'S', 'A', 'U', & 'PP' and under National Board 'R' stamp certifications.

Extensive work experience in French language contract review and translation, bid preparation, purchasing and procurement, expediting, site supervision and project management relating to steam boiler and pressure-vessel shop fabrication, new field construction and repairs at thermal-electric utilities, pulp & paper mills, refineries, and shipyards in Eastern Canada & Quebec.

Developing and implementing an Occupational Health & Safety program and written procedures in response to diverse and aggressive new provincial regulatory requirements and client specifications during this period.
Providing awareness and practical safety training for construction workers in worksite HSE requirements and procedures.

Canadian Coast Guard Inshore Search & Rescue, 1978,1979 (summers while attending University)

Relevant safety training courses:
- Det Norske Veritas Practical Loss Control Leadership
- Workplace Hazardous Materials Information System (WHMIS) Instructor
- Certified Secumar inflatable lifejacket technician
- St.John Ambulance Emergency First Aid and Cardiopulmonary Resuscitation
- Marine emergency duties and basic offshore survival training at Survival Systems in Halifax, at MIC in Rotterdam and OPT in Baku, including firefighting, helicopter underwater egress training, cold water survival, emergency First Aid, etc.

Other Safety training courses:
- Nova Scotia Construction Safety Association:
- Leadership for Safety Excellence
- Safety Orientation
- Confined Space
- Safety Basic Audit
- Advanced Safety Audit

Other training:
- Metallurgy for the Non-metallurgist
- Quality Assurance Level II
- ISO 9000

Affiliations:
- Canadian Society of Safety Engineers (CSSE)
- American Society for Quality Control (ASQC)

Academic background
- Major in French literature, minor in Russian language at l'Université de Montréal, 1978-81
- Art & Sciences at Dalhousie University in Halifax, 1977-78
- Rotary Club student exchange at l'Athenée Royal de Waterloo, Belgium, 1976-77

RELEVANT PERSONAL INFORMATION:
Fluent in spoken and written English, French and Italian, with working knowledge in other languages including Russian & Spanish.
Project experience in America, Europe, Africa, Central and East Asia, North Sea and Gulf of Mexico; direct working experience with nationals of United States & Canada, UK, Australia, France, Italy, Norway, Netherlands, Australia, Poland, Croatia, Cameroon, Chad, Nigeria, Malaysia, Indonesia, Philippines, Thailand, & Korea.

References Available on Request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3301 to 3350 of 6390)

Go to Search Parameters...

Brief Description

Nearly Eight years of Professional work experience in Project Management / Customer Services, of which Six years in Project Planning and Execution.

Over 8 years in the field of detailed engineering of Piping systems, which comprises preparation of plot plans, equipment layouts, piping layouts

Electrotehnical diploma, Operator computer license, Help programmator Fox-Pro license

Stress Engineer Proficient inNastran,Ansys, Ideas,NISa (Finite Element analysis software),C++,C,Visual Basic, Fortran etc

Working as an Engineer in the Instrument Maintenance Section of Karnaphuli Fertilizer Company (KAFCO), Bangladesh since October 2002 with all kinds of instruments such as transmitters, controllers, PLC, DCS, etc.B.Sc.Engg (Electrical & Electronic Engineering) from Bangladesh University of Engineerin

Effective planning and organizational skills including interacting with people, from upper management through hourly workers at various technical levels.

Multi-skilled, highly motivated and tenacious candidate with extensive skills in advanced drilling techniques, drilling engineering, production technology, well completions and workovers, reservoir engineering, team work and analytical and research competencies, developed through group seminar prese

i am engineer in chemical engineering and i have 6 years experience in crude oil treatement and 01year in gas treatement ,i am supervisor

8 + years experience in Instrumentation and Control, DCS field equipments (Yokogawa DCS & Field instruments). Good Knowledge on DCS, Pressure, Temp, Flow and Level devices, Control valves, analyzers and euipments. Additional Fieldbus Knowledge.

SH&E and Loss Prevention Engineer, provide services to exploration drilling, transportation and other facilities. Acts as advisor to Field Operation Manager on SH&E issues. The services are Site & Facility Audits, Fire Protection, Hazard Identification, Risk Assessment and the implementation of Op

Seeking a quality environment where my knowledge can be shared and enriched. Searching for a better opportunity where I can implement my expertise, programming skills, project management skills and administrative skills.

I am not very sure what a resume summary should say. This resume will tell you that I am a motivated individual willing to get into the engineering field. If you have any questions please let me know.

B.Tech in Mech Engg

B.E(mechanial) with skill of autoCAD and CATIA looking for freshers job

POWER SYSTEM DESIGN

20 years experience in DCS, SCADA, Controls, Commissioning, Design and engineering worldwide

I have BCs of process (Chemical) Engineering with five years expoerince in oil & gas plants design.

Piping field and desginer, project engineer coordinator /hdpe expert

Experienced Oil & Gas Project HSE advisor with QA/QC background. Excellent communication and writing skills, highly capable with languages and graphic presentations. Successeful in onshore & offshore construction projects in America, Europe, Africa and Asia.

To act as engineer of reservoirs, petrophysics or drilling, in oil or gas reservoirs. To generate the biggest added value to the Company contributing with effective and highly profitable solutions.

B.E(Petroleum) 4-year degree program.

workover & completion supervisor and now working as workover & completion superintendent

I am a qualified IMCA ROV Pilot Technician who has undergone training as a ROV Pilot Technician at IDESS Maritime Centre (Subic), Inc.Philippine and the 3 in 1 Electronic/ Hydraulic/ High Voltage Course at Miralco Foundation Institute Philippine.

i have 9 month experience in plc , scada. In company where i am working

I have done my B.E Electronics from a reputable university of pakistan.I have worked on PLC programming,Motor Control,Scada&DCS,Mcroprocessor&Microcontroller.In communication field Digital signal processing & Cisco networking are the field of interest.

Dedicated and disciplined, self motivated, good inter-personal relationship and team player. Ability to plan and realize set objectives, Quick learning skills, highly adaptable and service minded.

In May, I will be a graduate of the #1 ranked Petroleum Program in the nation. My numerous skills and accomplishments will aid me greatly within this exciting industry. In addition, my passion for business/economics has encouraged me to pursue a business foundations degree.

Safety co-ordinator in one of the world reknowned MNC M/s Owens Corning india ltd. Engaged in implementing safety policies, conducting departmental meetings on safety as per the countries regulation. Preparing safety audit report for top management.

I have installed, serviced, maintained, repaired centrifugal and reciprocating compressors, turbines, pumps, blowers and drivers.

Welding / Piping Inspector having more than 12 years experiance in oil & gas Field.

B E Mechanical Having 10 plus years of experience in Manufacturung, Production, Maintenance, Installation & commissioning, Inspection & Testing of CDP Fabricated Parts of Industrial M/c.

Naval Architect with 10 years experience in Inspection, QA/QC,ISO 9000,Project Management,General Administration in Marine,Oil & Gas Industry in the United Arab Emirates.

Simulation, Calculations for PSV, HE, Separator , HYSIS and Design II

CAD: Microstation V 8,Microstation 95 (ver 05.05.01.65), Microstation SE (ver 05.07.00.25),Microstation/J (ver 07.01.01.36), I/RAS B (ver 06.00I/RAS C (ver 08.00),Descartes (ver 6.0)Autocad

I have three year diploma of mechanical technology. Two year apprenticeship in rotating equipment from FFC fertilizer plant pakistan and 06 year experience in petrochemical plant of rotating and static equipments.

Instrument Design System i.e. INTools DCS Specification/Configuration Contracts and Budgetary Management Installation engineering/Commissioning Maintenance engineering, procedures and fault diagnostics

AutoCAD Designer - Architectural/Structural: Specialist for 2D/Advanced 3D Modeling & Rendering w/ AutoCAD 2007, 2D/Advanced surface & 3D Modeling w/ Mechanical Desktop 2005; Planning and Scheduling w/ Primavera Project Planner, User of Windows XP and NT + Microsoft Office applications

Piping supervisor (fibrication,construction,test package reviewing , witness for pressure test with the consultant) i speak two language (english and italian) and i have 27 years of experiences

14 YRS EXPERIENCE IN OIL & GAS FIELD IN INSTUMENTATION.

Seismic adquisition, oil data management, geology, mining management

My name is RAJENDRA T CHAVDA, I am INSTRUMENT TECHNICIAN, I have working exp. in this field more then 7.5 years. before i was working Russia and Abu bhabi (OFF SHORE) and India chem. and petro. chem Being given to understand from reliable sourse that thei

Supervisor, Quality, Process, wastewater

Instrument and Electronics Technician

SCADA Engineer

I am graduated in Petroleum &Gas engineering and have total experience in drilling engg & Drilling technology, such as Drilling engineer, Night Pusher & Night Company man.

13 years experience in the field of QA/QC, inspection, NDT, welding, painting, ISO, mech. equipments etc.

Chemical Engineer, PGDBM, Advanced Process Control Engineer (RMPCT,SMOC/RQE), DCS(Yokogawa CS3000, Yokogawa Centum XL, Honeywell TDC3000), Process Simulation

To take all the assignments as a challenge in order to uplift and maintain the goodwill. Dignity and growth of the concern that providing me knowledge, experience and growth of my career.

Extensively perform integrated study to generate reservoir characterization and geological modelling for field development plan within multidisciplinary team

Performed all troubleshooting, preventive and predictive maintenance on monitoring and control systems for petrochemical production operations. I can test, troubleshoot and correct production related processes through monitoring and control systems, safety standards in accordance ISO 14001.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 [ 67 ] 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out