Resume - I have total eleven years experience in Oil & Gas campanies with the five years ...

Misco Jobs

Resume #50817

CONTACT INFORMATION:
View contact information...

Dear Sir,

With due respect, I have to state that I have come to know through reliable sources for the post of MATERIAL CONTROLLER, GG-S-260-57-06 post are required under the kind control of company at gulf countries..

I am offering my candidature for the same post.

I have total eleven years experience in Oil & Gas companies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

My attached CV will tell you regarding my role and responsibilities.

I strongly hope and request your honor to kindly provide me an opportunity for an Interview, So that I shall show my relevant ability and try my best to satisfy you.

If given an opportunity, I shall remain ever grateful to you for your kind Co-operation.

With sincere regards.

(MOHD.PERWAIZ JAMAL)

CURRICULUM VITAE

MOHAMMAD PERWAIZ JAMAL

Subject: Application for the post of ¡* MATERIAL CONTROLLER¡¨ GG-S-260-57-06

Objective

* To join professional reputed company where I can grow and make better use of my potentials
* To enhance and enrich my abilities and knowledge in the service sector.
Profile

A highly motivated and confident individual for whom working under pressure is nothing new, posses a strong flair and grasping ability developed through 3 years of experience in Materials Controller post to be leaded the maintaining and controlling / Supervisory of the Main Warehouse for Plant Wide and 8 years of experience in Materials Inspector. Since I have been in the suit ion, where sense of efficiency is important for taking on challenges I¡¦m aware of the importance of time and have capability for completing tasks in given during. I¡¦m looking forward in areas where frontiers to accomplish challenges.

Employment History

(A) Presently I am working for ESSAR Oil Refinery pipeline project (EPC Project) as a MATERIAL CONTROLLER with Effect from 18th September 2003 to till date Controlling various stores and Lay down area (Piping, Structural, Mechanical, E&I, Welding and Civil) for project materials.

(B) I have worked in DUBAI ALUMINIUM COMPANY LIMITED (DUBAL) as a MATERIAL INSPECTOR in EPC project (Falcon, Kestrel & Eagle project) controlling to stores and lay down area (Piping, Structural, Mechanical, E&I, Welding and Civil) for project materials with effect from 14 April 1998 to 31st January 2003.

(C) I have worked in BOC INDIA LIMITED (British Oxygen Company) Jamshedpur as a ¡* STORE KEEPER¡¨ in Warehouse Department for (EPC Project) receiving, issuing, Inventory to all projects materials (Piping, Structural, Mechanical E&I, Welding and Civil project materials with effect from 23rd May1996 to 7th April 1998.

Page - 1 of 4

MOHD.PERWAIZ JAMAL Page 2

Routine Actives

* In involved follow up PR with procurement, ensure all Receiving & Inspection of incoming materials & Equipments assigned specified location, Storage, Inventory Controlling and monitoring all incoming and out going material & Equipments fully controlling and safe handling of Stores and lay down area.
* Receiving materials - Inspection, Quality and Quantity controller, Durability modeling life cycle, Calibration data and costing etc
* Reporting to Material Manager and absence of Manager reporting to Procurement manager.
* Coordination with Clients, Project Manager, Logistic officer for Port clearance & Stores personnel.
* Leading a team of stores & Yards personnel, Rigging and MEO.

Role & Responsibilities:

* Commitments and leadership with ensuring that all clients requirements related to material handling and storage are fully understood and met at all time.
* Equipping technical assistants to the operational activities related to materials and equipments services.
* Maintaining an overview of all Non - Conformances which have arisen with regards to specific to EPC Project materials and Equipments.
* Plan to offload shipping from the port and placing on yards of bulk quantity of project materials.
* Controlling overseas EPC project Materials and Equipments receiving operation (Shipping, Road, and Air Cargo) at site to ensuring accurate and deficient MRI/GRN or OS&D Reporting is being performed.
* Ensuring the effectively and safe utilization of the storage areas, determining what materials should be stored where are directing the movements of materials around the stores and lay down area.
* Comprehensive knowledge and understood of procurement, Logistic and Warehouse area and its importance to the overall functioning of the construction project.
* Monitoring and identify the materials and Equipments needs in function of project schedule.
* Maintaining accurate records of all power tools and equipments (Condition, Location, Calibration, Insurance, Third - party Inspection and maintenance requirements) by manual and Electronics.
* Controlling the flow of materials and PPE received from clients Or Company suppliers and deliver to project according to company procedures.
* Assembling documents certifying that the proper quantity and quality in ordered have been received.
Page - 2 of 4

MOHD.PERWAIZ JAMAL Page 3

* Preparing reports - daily, Weekly, Monthly, Yearly of consumed and incoming all project materials.
* Coordinating with Clients and project or Construction Manager for technical verification of materials, Stock available in stores and documentation flows.
* Maintain the store level of the items through the use of systems with ABC analysis. VED analysis.
* Planning, Organization, leading and controlling the function on Inventory control parameters.
* Receiving goods and materials into the stores checking the delivery notes (If MSDS required) and physically offloading materials from delivery vehicles into the store receipt station.
* Physically inspect goods and materials received in purchase order to ensure that the right quality and quantity Hs been delivered and there are MRI and (OS&D) to materials reporting supervisor.
* Prepare GRN/MRI and if OS&D essential of received materials in receiving section.
* Receipt materials & Equipments checking, Calibration data, Mill test certificates of origin, Insurance, ASTM/ASME, date of Expiry, MSDS all essentials depending on nature of materials.
* Shift in inspected Material into the warehouse using appropriate fork-lift OR mobile and EOT crane, itself in order safely and securely store in their designated place.
* Periodically verification of the stocks position, also checking by physically at freely time.
* Position the all incoming materials register in log book, Bin car and its maintenance records for inventory.
* Locate and issue stored materials on correct receipt of requisition slips isometric drawing from counter issue on side direct delivered.
* Issuing materials from store against materials requisition slip approved by responsible person and for project materials requisition required with isometric drawing.
* Issuing tools, equipments PPE & consumable etc, to individual on site and satellite operations for maintaining relevant records.
* All materials are stored and on a FIFO & LIFO basic in order to correct inventory system.
* Carry out weekly, monthly and yearly stock taken under the direction of the supervisor OR manager in order to inventory matched physical materials stored in stores and yards.
* Carry out routine checking, inspection, cleaning and minor maintenance of lifting & stacking equipments in order to unplanned operation.
* Interruptions are minimized and a safe working environment is maintained at all time.
* Performing and controlling various related coding inventory control and writing technical materials description through SAP relating system to a materials inventory.
* All the system is ON - LINE - SYSTEM for smooth running the plant.
* To follow Safety procedures and rules regulations of the company during the working period.

Page - 3 of 4

MOHD.PERWAIZ JAMAL Page 4

Educational qualification:

1995 Degree Bachelor of Science in Chemistry Ranchi (India)
1990 Completed Intermediate with science Patna (India)
1988 Completed secondary school Patna (India)

Technical qualification:

1993 Completed Material Management from Indian Institute of Material Management (India).
1996 Completed One year vocational training Course in Mechanical from Shavak Nanavati Technical Institute (SNTI) Jamshedpur, India

Computer Skills:

Very well familiar with all the operating link windows 98, 2000, XP, NT, Linux etc. and packages like MS - Office, MS - DOS, Access, and Tally etc, Sound knowledge about language & programming.
Conversant with the Internet application usage internally and out side.
SAP (AS400) internally networking.

Additional Knowledge:

Very good knowledge about an ISO - 9002, 18001, 14001 Certificate and internal and external auditing, Safety inspection, Safe manual handling, Housekeeping etc.

Languages:

Excellent communication skills in: English, Urdu, and Hindi.

Personal information:

Date of Birth September 18th 1970
Nationality Indian
Religion Islam
Marital status Married
Contact No. In India 00919934184670/9835583618
Driving License All types of Fork-Lift (Up to 10 Ton Capacity).

Passport Details
Passport No. F - 4714740 Date of issue: 16 - 09 - 2005
Date of expiry 15 - 09 - 2015
Place of issue: Ranchi (INDIA)

Page - 4 of 4

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6520)

Go to Search Parameters...

Brief Description

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

An Electrical Engineering and MBA degree holder with more than 16 years of experience in Maintenance, Operations and commissioning of Electrical facilities in Oil & Gas industries

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

PIPEMILLS,PLATE MILLS, EXPEDITOR, VENDOR INSPECTOR, TECHNICAL WRITER ON PIPE SPECIFICATIONS QA/QC CO-ORDINATOR,

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out