Resume - I am a fully qualified and experienced Health, Safety and Environmental professi...

Misco Jobs

Resume #5106

CONTACT INFORMATION:
View contact information...

Nationality: British
Aberdeen
Full UK drivers' license

A senior HSE professional with 14 years upstream Oil and Gas industry experiece working for major operators with experience in the UKCS, Mainland Europe, Kazakhstan, Russia/FSU, and the Far East

Key Skills

Creation, development & implementation of HSEQ management systems to internationally recognized standards - ISO 9000, ISO14000, OSHAS 18001, IMO-ISM Code, ISPS Maritime Security Code, Shell EP-95000, UK HS(G)65 etc.

An accomplished HSE Auditor and Audit team leader experienced in conducting compliance and risk based audits to international and operator standards both on and offshore.

Experience of major, ($ 1 billion plus) multinational projects where success is dependent on the effective selection & management of multiple EPCC/EPIC contractors & local sub contractors. Experienced in the mentoring, training and coaching of contractor companies to develop HSE documentation and Safe Systems of Work that meet the expectations of major international operators. Skilled in leading and conducting contractor and supplier qualification, selection and pre start up QHSE audits internationally.

Chairmanship of numerous contractor HSE assurance events including formal risk & hazard identification (HAZID, HAZOP & HIRA) workshops, emergency response exercises, risk registers and assessments, HSE Case & HSE Plan reviews.

A trained Accident Investigator, experienced in leading and participating in HIPO Incident & accident investigations including "Root Cause" analysis, regulatory reporting and remedial action planning.

An experienced safety trainer & Du Pont "S.T.O.P" system instructor. Practiced in the implementation and management of various "Behavioral Based" safety systems to address the unsafe actions of people and induce culture change, BP Golden Rules, Job Safety Analysis, Task Based Risk Assessment, T.O.F.S, S.A.F.E, Tool Box Risk Identification Cards, Shell Just Culture etc. Also was involved with the UKOOA Step Change in Safety initiative and OCA safety culture "tool kit" development.

Experienced in the creation, development, delivery and auditing of Permit to Work systems and associated control procedures, both paper and electronic, across complex multi site operations

Proficient in establishing HSE awareness, training and mentoring programs for locally hired staff and contractors.

Professional Memberships

Member of the International Institute of Risk and Safety Management (IIRSM)
Member of the Royal Society for the Prevention of Accidents (RoSPA)
Member of the American Society of Safety Engineers (ASSE)
Member of the International Association of Safety Professionals (IASP)
Member of the Society of Petroleum Engineers (SPE)
Member of the Institute of Occupational Safety and Health Offshore Specialist Group (IOSH)
Institute of Occupational Safety and Health (IOSH) Technical Safety Practitioner (TECH SP)
Associate Member of the Institute of Environmental Management & Assessment (IEMA)
Member of the UKOOA "Step Change" Safety Professionals Advisory Network (SPAN)

Professional QHSE Qualifications & Training

* BSC Diploma in Safety Management (Dip SM)
* BSC Specialist Diploma in Environmental Management (Dip EM)
* NEBOSH Certificate in Occupational Safety and Health (IOSH)
* Certificate in Construction Safety and CDM regulations
* Scottish Offshore Training Association Safety Certificate
* British Safety Council Certificate – Communicating the Safety Message
* British Safety Council Certificate – Occupational Health
* British Safety Council Certificate – Total Loss Control & Risk Management
* IQA ISO 9000 series management systems auditing course (QA Auditor)
* ISO 14001 Environmental Audit Training (IEMA Internal EMS Auditor)
* Managing Contractor HSE (Shell EP95-110)
* UK Department of Trade and Industry (DTI) Radiological Protection Safety Course
* European Union Ionizing Radiations Safeguards Training course. "EURATOM"
* ROSPA Manual Handling Assessors & Instructors Training Course
* Du-Pont "STOP for Supervision" S.T.O.P system leader & Course Instructor
* BP Advanced Safety Auditors Course
* International Marine Safety Management (ISM) code & IMO COSWP training
* International Ships & Ports Security code ( ISPS) Training
* Hazardous Substances (COSHH/Hazmat) Assessor Training
* Shaping Accident Free Environments S.A.F.E BBS system trainer
* Flammable & Toxic Gas Detection / Confined Space Entry Course (Authorized Gas Tester)
* UKOOA Safety (SMS) Interfacing training (UK Offshore Contractors Association Course)
* Scaffolding Safety Inspection certificate
* SCOTVEC NVQ Computing Course
* Planned Maintenance Management Systems PMS course
* HAVS -"Hand Arm Vibration Syndrome" assessors training course (UKOOA)
* Major Emergency Response and Media Management training (Big Project media group)
* BP "Getting HSE Right" & "GOLDEN RULES" training
* BP " Root Cause Analysis" Accident investigation training
* TRIPOD Beta ( EP95- 0321) Accident analysis training
* SOLAS (Safety of Life at Sea) Training Courses

Oil Industry Training & Certification
* MNTB Major Accident response - Command and Control training
* RGIT Offshore Safety Induction & Emergency Training (BOSIET)
* RGIT Helicopter Underwater Escape Training (HUET) + AIRPOCKET
* MNTB Advanced Fire Fighting and First Aid
* MNTB Certificate of Proficiency in Survival Craft (CPSC)
* IT literate and familiar with most PC software packages & EDMS systems.

2003 – 2007 ENI (AGIP Oil) Exploration and Production

Corporate HS&E Advisor

AGIP KCO is the operator of the North Caspian development project, which with a capital investment of $32 Billion and peak workforce of over 25,000 is one of the largest in the world. The projects also presented unique HSE challenges due to extremely harsh weather conditions and high pressure, sour gas wells.

The role of Corporate HSE encompassed the whole scope of AGIP KCO operations in the Caspian region, this included both offshore exploration and production across multiple fields (Drilling Rigs, process, storage and accommodation barges, marine vessels, artificial Islands) and onshore plant construction, commissioning and operating projects – (process plant, LPG plant, H2S extraction plant, pipelines, tank farms, rail loading terminal, marine & logistics base)

* Leading and participating in HSE Audits & assurance visits across AGIP operations both on and offshore in the Republic of Kazakhstan, as well as at project design offices in London and Milan and contractor locations around the world. (Europe, FSU, Huston, Dubai & Malaysia) Also conducting pre mobilisation & pre start up HSE inspections on Marine vessels, Drilling Rigs and Barges contracted to work for AGIP in the Caspian Region. Development and presentation of HSE Audit reports and remedial action recommendations to AGIP and Contractors Senior Management, agreement and prioritisation of corrective action strategies, monitoring to ensure effective close out by line management and contractors.

* Provided corporate advice and assistance to AGIP Kazakhstan country operations management and offshore asset teams on a wide range of HSE matters for different project phases from initial concept design, through FEED, construction and commissioning to operations. (Risk assessment, Contractor HSE management and training, STOP system implementation, Hazardous materials and radiographic safety, Marine operations, SIMOPS, Permit to Work, Job Safety analysis, Emergency Response planning, Lifting operations etc)

* Providing HSE Leadership to project and asset management teams, ensuring their awareness of Corporate company policies, systems, procedures and standards also assisting them in the correct implementation of the Corporate HSE-MS for their areas of responsibility.

* Supporting project & asset teams in conducting specific HSE assurance activities (HAZOP & HAZID, Development of Project HSE Plans, Development of Major Hazard Management Plans, Risk Registers, Emergency Response Philosophies, Escape and Evacuation Plans)

* Ensuring in conjunction with Operations Director and his project managers that the "Contractor HSE Activities Program" was effectively implemented by all project contractors - HSE Interface Document, HSE plans, safe systems of work and incident reporting procedures were developed by contractor companies in accordance with AGIP requirements. Review and compliance monitoring of EPC/EPCC contractors HSE critical documentation including design, construction and operations Safety cases, Hazard & Risk registers and emergency response plans. Where concerns were identified, working with the contractors and local HSE teams to develop appropriate HSE remedial action plans and training programs. Major project contractors included Bechtel, Saipem, Halliburton KBR, Petrofac, Aker McNulty, Kaeverner, ABB, Parsons, KCA Deutag and many others usually with Russian or Kazakh partners and multiple smaller local and regional sub contractors.

* Representing AGIP on HSE matters with key Stakeholders including: Republic of Kazakhstan government officials, regulatory bodies and venture partners (Shell, Exxon, Total Fina Elf)

Jan 2003 – Jan 2004

Project Health, Safety and Environmental Manager for the Engineering, Construction and Commissioning of the $ 1.3 Billion REGANOSA LNG facility and Marine terminal in Spain. This was the Senior Project Safety role, based in Spain, with a large multinational contractor workforce of over 2000 from Europe, Africa and South America.

* Line management responsibility for HSE Officers, Contractors Safety Officers, Environmental specialists, Document Control, site QC/QA coordinators, emergency response & firefighting teams, first aiders and local site security personnel. HS&E Coordination for all site activities between the Company, Main EPCC / EPIC Contractors & local Sub-contractors (Transportation, Marine, Engineering, Civil Construction etc). Monitoring of HE&E key Performance Indicators, both leading and lagging, for project site contractors.

* Ensuring effective application and implementation of the company's HSE-MS procedures (Permits to work, Risk Assessments, COSHH, Welding, Heavy Lifts, Scaffolding, Radiography, Confined Space Entry, Emergency Planning) for all contractors on site

* Accident, Incident, non-compliance and pollution reporting focal point, responsible for conducting investigations, recommending and ensuring the implementation of remedial actions, notifications to project partners (ENI-AGIP, Repsol, Union Fernosa, TGE), regional enforcement authorities and the Ministry of Health at Work as appropriate.

* Development and Implementation of the project HSE Plan and project specific HSE & Security procedures - PPE, Task Risk Assessment, Work equipment, Site traffic management, Site Access, Noise & environmental pollution, emissions to air & sea etc.

* Appointed "Safety Coordinator" for compliance with RD 1627/1997 (92/57/ CCE) (Construction Design & Management Regulations in the UK.) Development and review of Construction Phase Safety Plans and documentation required under this legislation.

* Emergency Response leader for the development of site "Internal and External" Emergency Plans as required under "Seveso 2 Safety Case" (96/82/EC) Regulations – project focal point for liaison with the Local Authority, Fire brigades, Police, Civil Guard, Ministry of works, Port Authority, Coast Guard and Navy.

* Co-ordination and monitoring of 3rd party consultancy company safety deliverables, Fire and Gas detection system studies, environmental Impact assessment, Ship maneuvering and maritime safety studies, engineering design safety reviews, QRS´s and HAZOP´s.

* Training, mentoring and succession planning for hand over of HSE related activities to local staff at contract completion.

Professional Experience 2000- 2003 Head of Safety (Offshore & Sub Sea)

Level (3) and the Interoute group. Holland, EU and International

Head of Safety (Offshore & Sub Sea) for an $8 Billion pan European Subsea network construction, commissioning and operating project. Custodian and focal point for the Project Safety Management System, the project Safety plans (marine & subsea) and specific construction safety (CDM) compliance plans. Reporting to the Vice President of Operations.

* Provision of advice, guidance and support to management on EU, UK & UKCS Safety legislation, HSE / IMCA codes of practice, international standards and offshore/marine industry best practice. Supervisory responsibility for project Safety Officers and Safety department personnel also financial responsibility for project Safety budget.

* Development and management of HSE plans, Audit Schedules, safety KPI's and Safety Interface documents for project principal contractors - WS Atkins, Global maritime & Flour.

* Tender evaluation, HSE assessments and Safety gap analysis for other prospective offshore project contractors. This ranged form full HSE MS & CDM plan reviews for cable landing station construction through Safety Method Statement and Risk assessment reviews for specialist electrical, instrumentation and engineering companies to COSHH & PPE compliance reviews for industrial services contractors.

* Development and implementation of project safety procedures, these documents were prepared in accordance with the requirements of the European Framework directive 89/391 on Safety and Health at work and subsequent Individual directives: Workplaces, Chemical Safety, Noise exposures, risk assessment, electricity, construction (CDM), Work Equipment etc. Where variations were required by national legislation an appendix was added to the project procedure explaining the particular additional requirement in that EU member country.

* Review by Inspection and audit of project and contractors sites and facilities, including Cable landing Station construction sites and marine vessels to ensure safe systems of work were in place and in compliance with company standards as well as applicable national and European Community legislation - First Aid provisions, Emergency Response plans and fire fighting systems, Permit to Work (PTW) systems including confined space entry and lock out mechanical & electrical Isolations, SIMOPS, Radiation/Microwave safety, High Voltage Electrical safety, Marine operations and Laser safety.

* Risk assessment, development and implementation of safe operating procedures for work in areas covered by automated fire detection and suppression systems (HV switch facilities, transition suites, cable landing stations.)

* Responsibility for ensuring all incidents and accidents were reported to the company and where appropriate to the consortium partners and appropriate regulatory authorities. Assisting Project & Country management in conducting a full investigation into any reported incidents and monitoring the implementation of agreed corrective actions by feeding them in to the terms of reference for future audits or site inspections. Issuing of "safety alerts" across the project to share the lessons learnt from the investigation.

Based from the Netherlands / London with extensive international travel around Europe as well as trips to contractor facilities in the Far East and corporate head office in North America.
Professional Experience 1998- 2000 QHSE Engineer

OIS - BP Exploration UKCS

Quality, Health, Safety and Environmental Advisor for OIS's North Sea Oil & Gas operations for BP Exploration - Greater forties, Miller, Bruce, Andrew and Harding Platforms also later for Talisman Energy when they took over from BP the operation of the Beatrice, Buchan & Clyde Platforms. Working in an integrated BP / contractor organization structure.

* Provided advice and guidance on all QHSE matters for OIS International Inspection's North Sea Oil and Gas business with BP. Represented OIS at the offshore contractors association and UKOOA Step change in Safety Cross industry forum meetings.

* Responsible for ensuring, by inspection and audit, both on and offshore, that the company and Clients safe operating procedures and systems of work were being effectively implemented and that they met operational and legislative requirements.

* Developed new HS&E procedures, guidelines & work instructions as required by changes in Legislation or the requirements of our BP. Implementation of the requirements of the Lifting Operations and lifting Equipment Regulations 1998 (LOLER) & the Provision and Use of Work Equipment Regulations 1998. (PUWER) across company North sea operations.

* Due to the nature of the company's activities on BP installations (integrity management, NDT, Cathodic protection, Rope access etc.) there was a particular emphasis on ensuring compliance with the new Ionizing Radiations Regulations 1999 (IRR99) these require employers to keep exposure to ionizing radiations as low as reasonably practicable (ALARP). Also with EU Council Directive 96/29/ EURATOM (May 96) which lays down specific safety standards for the protection of the health of workers against the dangers arising from ionizing radiation. Development and update of company procedures and employee training and awareness programs to ensure compliance with this new Legislation.

* In partnership with BP, I assisted with the introduction of the Du- Pont Behavioral based Safety Training Observation Program (STOP) across the North Sea Oil & Gas Business. I also participated in Joint Emergency response exercises with BP and Talisman Energy.

* Conducted Joint accident/incident investigations with BP using the "Root Cause Analysis technique" and ensured that the necessary corrective actions were effectively implemented.

* Presented company & asset HS&E performance information and HSE plans at BP Business unit Safety forums, Diagonal Slice Safety seminars and UKOOA Step Change meetings.

* Participated in 3rd party certification audits for the company with BVQI and the British Safety Council also conducted Audits and Inspections of Subcontractors and vendors as required by our ISO 9000 Quality system and First Point Assessment.(F-PAL)

* Delivered in house training on the company and clients Safety Management System procedures: including BP "Getting HSE Right" & Golden Rules, Risk Assessment, Accident Reporting, Permits to work, Radiation Safety, Manual Handling etc. to the workforce both on and offshore. Promoted and facilitated the implementation of UKOOOA Step change "Personal Safety contracts" for line management.

* Deputized for the HSE Manager in his absence. Based in Aberdeen Scotland with regular visits to offshore installations and occasional visits to other Oil & Gas regions, in the Middle East and Asia on behalf of the HSEQ Manager.

Professional Experience 1995-1998 QHSE Advisor

Atlantic Power and Gas Independent North Sea Oil Company

APG operated numerous offshore floating production, storage, and offloading (FPSO) facilities in the North Sea, including the Ramform Banff and the Britannia on behalf of Conoco, the Northern Producer on behalf of Texaco and the Gryphon on behalf of Kerr McGee.

I was employed to provide Health, Safety, Quality and Environmental support across the company's Oil & Gas operations. My function was to ensure we met the requirements of our safety management system, that of our clients and the Safety legislation applicable to the UKCS.

Merchant Navy Officer 1992-1995

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 6396)

Go to Search Parameters...

Brief Description

Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.

Shut-down supervisor, project manager, safety manager,i&e control technician, refinery,

I AM A HIGHLY QUALIFIED PIPE FITTER AND GAS ENGINEER EXPERIANCED IN LPG AND NATURAL GAS, I AM COMPITANT IN WORKING ON SCREWED STEEL PIPEWORK AND HAVE WORKED IN THE PLUMBING AND GAS INDUSTERY FOR OVER 25 YEARS.

Instrument technician

22 years experience and I am presently working as an Electrical Supervisor in Kuwait National Petroleum Company

15+ years experience, mechanical engineering background, AutoCAD, ProCAD, Microstation, Micro Office

Well versed at the interpretation of Piping and Instrument Diagrams, Signal Flow Diagrams, Rung Diagrams, Panel Drawings, Loop Sheets.

I am practical person and have occurrence procurement base.

· Dynamic sales professional with over eighteen years of experience promoting industrial equipment and service to various Process Industry

Mechanical Engineer with 11 + Years of experience in Materials and Asset Management

Currently set to graduate from University of Houston in December 2008 with a Masters Degree in Petroleum Engineering. I am a full time employee also at El Paso, working in the Reserves Mangagement group as a Sr. Production Engineering Analyst.

Professional in Upgrading and new built Rigs for Offshore and Onshore

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

Please find enclosed my resume to be considered in a position as an Electrical, instrument and control engineer (design, cost estimator, operation and / or maintenance) within your company.

I want drilling supervisor/Rig superintendent job

About twenty (20) years of diverse working experience in various fields, out of which Ten years in the Oil & Gas sector of Middle East. Worked for Projects for Agip KCO, ADCO, Dolphin, Aramco, Sceco Etc.

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Production Completion Engineer

I am Vasu Jajala working in Shell Nig.Ltd. As a Construction Instrument Supervisor. I have 16 years plus of practical experience in the field of Process/Machine Control Instrument of Offshore & Onshore, Petrochemical, Petroleum refinery, Oil/Gas and QATAR LNG industries.

A proactive and analytical Mechanical Engineer with over 12 years experience of Working in a Multinational and Multi cultural work environment in fabrication operations, welding processes, project management, quality / process enhancement ,maintenance with highly regarded organizations.

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

Sr. Piping Designer - CadWorx/AutoPlant

I have experience in design of ALS (pcp, rod pump, esp, plunger lift) and their software (S-rod, PC-Pump, Prosper) completion systems, pipe lines, production plant, Sofwares like DSS, Open Wells, Sahara, M-Bal, Prosper, Visio, Merak Peep. I have too experience as coordinator in tool contracts.

2D, 3D (Land/TZ/Marine) both on-site QC and full Data processing and Operation Design

Electrical Engineer with 14 years of hands-on experience in the various fields of engineering assignments, such as; project management & supervision, construction & maintenance, quality control & inspection, testing & commissioning works, most of which were undertaken in the venue of oil & gas,

Piping PDS PDMS

Job Skills:Good verbal and written communication skills Physically fit to do the work required, have no a fear of heights or confined spacesA positive attitude, high tolerance for job pressure and long hours, including to be on call 24 hours a day, 7 days a week and on weekends and/or holiday if nee

PDS PDMS Plant Layout Piping Material Specification

Reservoir Engineer with over ten years experience in reservoir modeling, simulation, history matching, well testing, material balance, decline and nodal analyses for carbonate/clastic oil and gas reservoir development.

Area of Expertise: Familiar with trouble shooting and prevention of occurrence of breakdowns by interpretation of operational data, through analytical approach. Having expertise on engines, auxiliaries And Heavy Engineering Machinery(Auto workshop),Commissioning experience in Jack up and deep drill

Worked with electrical substation, transformers, circuit breaker, relays and other equipments

I am Sr Pipe stress engineer and currently working at Ranhill Worleyparsons at malaysia

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Commissioner Supervisor of Hydro Power Plants.

Seconded to Reservoir Characterisation Department for specific modelling projects including static Uncertainty Analysis & Field Development Asset Teams. Full Field static modelling using multiple techologies. Entire geocellular modelling workflow including lithology & depositional facies.

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out