Resume - A Uk based professional Chemical/ Process Engineer with 20 years experience in v...

Misco Jobs

Resume #5201

CONTACT INFORMATION:
View contact information...

Specialist environmental equipment and plant supplier (SBR's, aeration, composting). Short term contract Process Engineering work and consultancy.

• Contract Manager at Texaco's Pembroke Refinery. Responsible for the man management, process and maintenance of the waste water treatment plant and sludge processing facilities. Responsible for co-ordinating and overseeing the sales of Nalco process chemicals (corrosion inhibitors, de-emulsifiers, por point supressants, flocculants, coadgulants) throughout the refinery (£1.6m /annum).

• Senior Design Consultant for Southern Water Working in a group of consultants on the feasibility for the construction and extension of sewage works to meet the tightening consents on quality of final effluent.

• Wardell Armstorng Consultants Preparation of feasibility study for the construction and operation of a Centralised Anaerobic Digester in Stoke-on-Trent.

• Stam Ltee, Mauritius. Prepared the FEED study for the construction of a landfill leachate treatment facility.

• 2000 - Winner of BIO-WISE Demonstrator Project competition, in conjunction with University of Leeds and Selden Research. Project for the biological treatment of waste water from a chemical manufacturing plant using a Sequencing Batch Reactor.

• Negotiated representative's agreement with a US manufacturer of process equipment. Sole representative in the UK and Europe for unique environmentally related processes and equipment.

• Obtained a grant from the DTI for the development of a novel effluent treatment process. This project was done in conjunction with Staffordshire University.

• British Nuclear Fuels Engineering. Member of the Process Engineering section of the project team working on the Sellafield Drypac Plant. Producing the Process Design for the £410 m plant. This plant is for the treatment of a radioactive sludge composed mainly of magnesium hydroxide. Duration of work was 1 year. Activities included preparation of Process Descriptions, Process Flow Diagrams, Engineering Flow Diagrams, Process Data Sheets, Instrument Process Data Sheets. Equipment sizing and specification. Interfacing with suppliers on development and design work. Conducting design and safety review meetings.

• Knight Piesold, Working as an associate, providing Process Engineering Produced a preliminary process design and cost estimate for the treatment of minewater and subsequent sludge processing facilities for Las Crusas, Spain.

• Knight Piesold, Working as an associate, providing Process Engineering. Technical services for process evaluation for the Active Treatment Design Report – Wheal Jane Minewater Project.

EXPERIENCE PRIOR TO FORMING ZYLO TECHNOLOGY

DORR-OLIVER Co Ltd October 1993-September 1995

Contractor/process equipment supplier. Active in Minerals, Chemicals, Pulp and Paper, Pharmaceuticals, Municipal Effluent and Industrial Effluent Treatment. Projects up to £20M in Fluidised Bed Incineration, Filtration, Thickening, Dissolved Air Flotation.

Business Manager - Environmental Systems October 1993-September 1995

Development and running of the Industrial Effluent Treatment Business. Tendering, negotiating, developing marketing strategy, Project Management.

• Developed a phosphate removal process from wastewater for Eli Lilly Pharmaceuticals, Cork.

• Approached by Dorr-Oliver to take the position.

• Implemented Failure Mode and Effect Analysis as a means to improved project execution.

MONSANTO plc

Batch Fine Chemical Manufacturer June 1992 - October 1993

Senior Project Engineer June 1992 - October 1993

Project Management and Cost Control. Development of Front End Packages, Premise Documents and Detailed Designs. Working in a TQM environment. Preparation of an application to the HMIP for the authorisation of a prescribed process under IPC.

• Successfully installed projects for acetone scrubbing vents and the pastillation of a molten polymer.

• First Project Engineer in Monsanto Europe to fully utilise CPM (Capital Project Management) on Pastillator project.

• Liased with and visited Monsanto joint venture in Korea during the Pastillator project.

AUGHINISH ALUMINA LIMITED (65% Alcan, 35% Billiton)
High temperature Bayer Process Alumina Refinery

Section Engineer June 1990 - June 1992

Responsible for process and maintenance within section. Supervision of two Engineers and a Technician. Processes within section included Counter-Current Decantation and Washing of red mud, red mud disposal, Multistage Evaporation, Effluent Treatment and Crystallisation,.

• Instrumental in implementing ISRS in Section (International Safety Rating System)

• Solved refinery water balance problems by installing new procedures for setting wash water control philosophy.

• Reduced section maintenance budget from £3.5m to £2.5m in two years.

• Deputised for Section Manager (73 employees in Section) Resolved labour dispute.

• Represented Aughinish at Alcan International Conference in Montreal on red mud and presented two papers.

DORR-OLIVER EUROPE March 1984 - June1990

European Industry Manager Designate for Pulp and Paper

Process and marketing support for sales of recausticizing plants (up to £3M), pulp filters and screens

• Youngest ever Dorr-Oliver Industry Manager.

• Award for outstanding performance.

Senior Process Engineer/Process Engineer/Applications Engineer

Laboratory and pilot testing (Thickening, Filtration, Effluent Treatment processes), mechanical design of process equipment, commissioning, specifying of ancillaries in projects.

EDUCATION

9 'O'-levels, 4 'A'-levels Chesterfield Grammar School
B.Sc. Honours in Chemical Engineering, University of Newcastle upon Tyne
Chartered Engineer
Member of the Institution of Chemical Engineers

COURSES INCLUDE

Many in Solid/Liquid Separation and Waste water

Monsanto Management Style
Capital Investment Appraisal
HAZOP
Full training in Total Quality Management
Centrifugation
Numerous papers (UK. Germany USA)

PERSONAL

Date of Birth 28th June, 1961 - Married - Two Children

INTERESTS

Caving - Swimming - Cycling – Jazz

LANGAUGES

French - - Spoken Fair
Written Basic

German Spoken Fair

SPECIFIC PROJECT EXPERIENCE 1984 to DATE

2003 Texaco Ltd, Pembroke, Wales Process Consultant for projects to tackle waste arising from processing DOBA crude. These were a heavy metals removal facility; incubator for nitrifying bacteria and carbonaceous substrate dosing. Additional process and project engineering for the refurbishment of API separators and the installation of a feed tank for the dewatering centrifuge.

2002 Wardell-Armstrong, Newcastle-under-Lyme. Feasibilty study for the construction of a Centralised Anaerobic Digester at the Chatterley Whitfield Mining Museum site in Stoke-on-Trent.

2002 Stam Limited, Mauritius. Front end Process Design for a landfill leachate treatment plant.

2001 Selden Research Ltd, Buxton. Design, supply and installation of a Sequencing Batch Reactor to simultaneously operate with anoxic and aerobic conditions in the same reactor. Following laboratory tests the design and specification of a full scale plant will be undertaken. Laboratory tests will be undertaken by Aqua Enviro at the University of Leeds

1997 to Imerys (formerly English China Clay International) Replacement of gearbox
2000 (centre drive) on 140 ft diameter clay thickeners.

1999 Lundbeck Pharmaceuticals, Teeside. Instigated testwork to evaluate the use of Sequencing Batch Reactors to treat wastewater from a pharmaceutical factory. Testwork carried out at Leeds University on behalf of Zylo Technology.

1998 Camp Bros. (Café) Ltd. Scotland. Instigated testwork to evaluate the use of Sequencing Batch Reactors to treat wastewater from an ice cream factory. Testwork carried out at Leeds University on behalf of Zylo Technology.

1998 to Knight Piesold, Ashford, Kent. Provided consultancy services on process design
2000 for the Wheal Jane Minewater Project.

1997 Knight Piesold, Ashford. Produced a preliminary process design and cost estimate for the treatment of minewater and subsequent sludge processing facilities for Las Crusas, Spain

1997 Lyons Maid Nestle. Conducted laboratory and pilot scale testwork to establish the treatability of wastewater by a Sequencing Batch Reactor

1995 British Nuclear Fuels Engineering Limited, Salford. Sellafield Drypac Plant. Process for screening and sorting radioactive silo contents (sludge and swarf).

1995 Aughinish Alumina, Limerick. Seed hydrate dewatering on large diameter vacuum disc filters. Prepared the Front End Design package and tender documents.

1995 Pfizer Pharmaceuticals, Sandwich. Front end design and tender for jet aerators, pipework, compressors and control equipment for activated sludge plant

1995 Texaco, Pembroke. Dissolved Air Floatation to remove oil from refinery wastewater. Pilot testing and Front End Design preparation

1994 Knight Piesold, at Wheal Jane Mine Cornwall. Initiated testwork to prove residual cadmium levels in treated minewater.

1994 Eli Lilly, Cork. Testwork to define a phosphate removal process from wastewater. Test report used to demonstrate BATNEEC to Irish EPA. Front End Engineering Package prepared for Eli Lilly. Thickener designed and sold.

1993 Monsanto, Wrexham. Project Engineer in plant manufacturing fine chemicals by batch processes.

1991 Aughinish Alumina, Limerick. Process definition for effluent treatment plant. Neutralisation, sedimentation and centrifugation of settled sludge. Hydrocyclone studies for hydrate thickening. Also commissioning of a Horizontal Belt Filter for the dewatering and washing of oxalate crystals.

1989 Laporte Inorganics, Widnes. Part of the commissioning team for two stage lime neutralisation and two-stage sedimentation process with underflow recycling.

1989 Cotton Valley Sewerage Treatment Works, Milton Keynes. On site tests to demonstrate improved underflow on Primary Clarifiers using diaphragm pumps.

1989 Reynolds Metals, Corpus Christi, Texas. Laboratory testwork to size and specify a Horizontal Pan Filter for dewatering and washing Alumina Hydrate.

1988 Acna Chemie, Genoa, Italy. Troubleshooting and modifications for chemical manufacturing process using Rotary Vacuum Filters.

1988 Alicel, France. Commissioning team on recausticisation process for Kraft pulp mill. Lime slaking, causticizing, dregs filtration, green liquor Clarification, lime mud filtration, white liquor filtration.

1988 British Sugar, Peterborough. Development of a novel approach to brown stock washing on proposed straw pulp mill.

1988 Hickson and Welch, Castleford. Laboratory based testwork on effluent coagulation and flocculation and neutralisation. Precipitated sludge then used to perform thickening tests and dewatering by filtration.

1988 Interalumina, Venezuela. Conducted site based testwork to size Horizontal Pan Filters for the deliquoring and washing of seed hydrate.

1988 British Steel, South Wales. Laboratory testwork and commissioning team for two-stage neutralisation of acid water using lime with underflow sludge recycling. Thickened sludge was subsequently pressed.

1987 Interalumina, Venezuela. Conducted site based testwork to prove performance of a Rotary Vacuum Filter in comparison with gravity thickeners.

1986 Tioxide France, Italy, UK and USA. Site based pilot tests to prove operation of the Press Belt Filter for the dewatering of titanium dioxide.

1986 Deanshanger Oxides, Milton Keynes. Testwork for the sizing and specification of a Press Belt Filter and a Horizontal Belt Filter. Commissioned the equipment.

1985 British Coal, South Wales and Yorkshire. Commissioning of two Horizontal Belt Filters for the dewatering of coal fines.

1985 May and Baker, Norwich. Effluent neutralisation tests using milk of lime and subsequent sedimentation testing.

1985 Corleone, Sicily. Pilot ultrafiltration tests for concentrating citrus oil.

1984 Jahncke Fruit Juices, Hamburg. Conducted lab and pilot ultrafiltration testwork to define process. Commissioning of the full–scale process.

PAPERS, PUBLICATIONS AND PRESENTATIONS

"Treatment of Effluent from a Small Industrial Cleaning Manufacturer using SBR Technology"
Presented at Biennieal Conference on Management of Wastewaters
April 2002, The Carlton Highland Hotel, Edinburgh, Scotland

"Sequencing Batch Reactor Technologies – Packaged Systems for Small Communities"
Presented at conference entitled "Sewage Treatment Strategies for Coastal Areas and Small Communities"
December 1999, Edinburgh Conference Centre, Scotland

"Environmental Biotechnology"
Presented at Biowise Seminar run by DETR
April 1999, Nottingham, UK.

"Sequencing Batch Reactors for Small Applications"
Presented at a course entitled "Sequencing Batch Reactors 2"
September 1998, University of Leeds, UK.

"Tightening the Paper Mill Water Circuit Using Wedge Wire Screens"
Paper Industry Technical Association Symposium on the Environment.
April 1995, Maidstone, UK.

"Selection and Scale Up of Continuous Filters - Experimental and Calculation Procedures".
Presented at the Filtration Society 30th Anniversary Symposium.
September 1994, Birmingham, UK.

"Treatment of Mixed Effluent from a High Temperature Bayer Process Alumina Refinery".
To have been presented at a conference -"Waste Water Treatment in the Process Industries".
September 1992, Birmingham, UK. The conference was cancelled.

"Aughinish Alumina Mud Stack and Storm Water Management"
"Red Mud Filtration, Viscosity Reduction and Pumping at Aughinish Alumina"
Both presented at "Mini Symposium on Red Mud Handling".
October 1991, Alcan Headquarters, Quebec, Canada.

"The Development of New Applications for the Vacuum Drum and Press Belt Filter".
Presented at 5th World Filtration Congress
May 1990, Nice, France.

"Vacuum Filters for a Wide Range of Applications in the Bayer Process".
Presented at the TMS Conference.
February 1990, Los Angeles, California, USA.

"New Horizontal Belt Filters for a Wide Range of Applications".
Presented at the Filtech Conference.
September 1989, Karlsruhe, Germany.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 6391)

Go to Search Parameters...

Brief Description

OIL & GAS COMMISSIONING FOR PROCESS PLATFORM / DRILL SHIPS LIKE : MOSVOLD-1/2

With Thirteen years experience for working on different types and application on line gas and liquid analyzers and gas Chromatographs all over India, Saudi Arab, Qatar in most of the industries like Refineries, Offshore sites, Fertilizers, Steel plant, Petrochemical plants etc.

Construction management, supervision and engineering of mechanical and welding works e.g. oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, structural steel, filling stations, town gas and water distribution systems, working on oil- and gas life lines e.g. maint

17 Year expereice in Insrumentation , GE Harris, Realflex & Invensys SCADA Systems, ABB & Invensys DCS systems.

PABX SERVICE ENGINEER

Production Engineer with 12 years of industry experience

BSc in env. MSc in safety eng.

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

A position with strong emphasis on Industrial Automation and electrical engineering and direct exposure to ESD, F & G, Process Control & Automation System Design, Configuration and Implementation. Support responsibilities utilizing strengths in the areas of project management and system architecture

15 YEARS EXPERIENCE IN PROCESS CONTROL INSTRUMENTATION/QUALIFICATION : NCVT ELECTRONICS

I am applying for the job posting in Fory McMurray with Sands Surveys 2000. I am fully qualified and looking forward to hearing from you. Please see my resume for my experience. I am available to start work when you need me to.

Field Engineer

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

DCS Lead Engineer

Experienced Geophysicist

10 years in Geophysicist

B.Tech (Chemical) with 13 years 10 months experience

Having 13 years of exprience in maintenance construction and design field of all types of instruments in oil and gas industry.preference given for offshore / on shore ON/OFF duty jobs.

Instrumentation engineer B.E (Electronics) with experience in Engineering /Design in the field of instrumentation. My experience in the sector of EPCM’s and E&P includes the supervision of different Oil and gas Projects in the upstream and downstream sector, incl: insta; Erection and commissioning

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.

Hands on experience on High Pressure Mobile Hydraulic Systems (Closed Loop & Open Loop Systems), which includes Variable & Fixed Displacement Hydraulic Pumps & Motors, Various types of Hydraulic Valves, Proportional Valves, and Electro Hydraulic Actuators, Hydraulic Cylinders.

Lead offshore structural engineer

Electrical Engineer with wide experience of erection, commissioning, troubleshooting and maintenance

Experienced Professional Mechanical Engineer with 15 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills.

Piping DEsign Engineer with 13 years of experience in the field of refinery, petrochemicals, fertilizers. Experience in layouts, materials, stress analysis. Presently working with KNPC, Shuaiba Refinery, Kuwait

Technical Professional with over 20 years global experience in Petroleum Engineering, Intervention Services, Project management, On-site Supervision, Proposal and Report preparation, Contract preparation and Administration.

A hardworking and highly competent Electrical Engineer

A petroleum geologist proficient in interpreting and integrating well logs, core analysis data, petrology, 2D and 3D seismic, well test and production data to develop prospects and drilling opportunities leading to the economic production of hydrocarbon.

QA design and Quality Control including conduct of coordination and various inspection activities on mechanical packages in UK, Europe, USA, Middle East and Far East. Computer system / procurement activities.

My objective is to start a new career in Indonesia that would allow me to expand on my twelve years of sales, marketing and contract experience in the service sector for the Indonesian Oil, Gas and Geothermal business after retiring from Schlumberger.

Charted Engineering marien & mechanical engineering with PHD in Engineering management,20 Years experience as senior corrosion engineer in mining and petroleum industries. With 15 years in engineering management. Specialist engineer coating and Cp design.

I am a Project Manager/Mechanical Engineer with 33 years experience in both, International & local projects.

2003-2004 Veco Engineering Abu Dhabi 2002-2003 ABB s.r.l. Romania 2001-2002 ABB s.r.o. Czech Republic 2000-2001 T.I.A.b , Romania 1999-2000 Progeco Sistemi Group, Italia 1998-1999 I.P.I.P. , Romania 1980-1998 Upetrom S.A. Romania

Directing and maintaining the QHS&E efforts of the Region, to conform to Company policy, regulatory, and customer’s requirements. Developing Region policies, procedures, and related documentation. Interact with client HSE departments to ensure understanding of HSE Systems.

Ist class Chemical Engineer with vast experience in operation , Project Management , Engineering Management , Commissioning Management in Fertilizer , Petrochemical and refinery field.

Mechanic Engineer

A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.

DCS system engineering design, configuration, installation & commissioning.

Take up Senior Corporate Management Level challenging position with multi-million Heavy industries

Develop and evaluate fire hazard analysis,various types of fire protection/detection and suppression systems, scope development, review of deliverables, identify user interface requirements and project coordination

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out