Resume - PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Enginee...

Misco Jobs

Resume #5277

CONTACT INFORMATION:
View contact information...

OBJECTIVE Generally, to work as a Mechanical Engineer; ultimately to pursue my passion in the field of Metallurgics/Materials, Surface
Technology and specifically in Thermal Spraying.

EDUCATIONAL STATUS Doctorate in Mechanical Engineering
University of Dortmund, Germany

WORK EXPERIENCE

Permanent Employee: Head Research & Devolopment,GTV-mbH,Germany 2002 – current

-responsible for various incoming projects from initial query, organizing and coordinating technical employees, to timely completion
-as head of a process team, employ techniques such as microscopic, x-ray, x-ray diffraction, spectroscopic studies to investigate and conduct experiments on commercial projects for the purpose of improving and developing custom applications and methods in the field of thermal spraying techniques
-conducting various research activities and projects - eg. – Development of a new plasma spraying gun for increased powder deposit efficiencies

Scientific Employee: Department of Surface Technology,
University of Dortmund, Germany 1996 – 2002

-as primary contact for private industry, responsible for various incoming projects from initial query, organized and coordinated technical employees and collegiate assistants, to timely completion – approximate contract range: $100,000–180,000/yr
-as part of a process team, employed techniques such as microscopic, x-ray, x-ray diffraction, spectroscopic studies to investigate and conduct experiments on commercial projects for the purpose of improving and developing new applications and methods - eg. – conducting a failure investigation for a textile company
-between 1996 and 2001, acquired seven Research & Development Projects with a value of approximately $1.4 million in research grants; also resulting in twentyone publications to my name
-mentored collegiate assistants as well as outlined their final research projects and graded them
-previously tasked with preparing offers, proposals for damage investigations and research applications, liaising with clients, incorporating recommendations into reports, acquisition of surveys and proper fulfillment of coating orders
-conducted numerous research activities and compound projects, one being on the
Development of Zirconia-based Thermal Barrier Coatings by High Velocity
Oxygen Fuel Spraying (HVOF) Techniques
-involved in the initial research project and subsequent presentation of a paper on the Development and Manufacture of Ceramic Run-In Coatings for
Twin Screw Compressor Machines at the International Thermal Spray
Conference, Montreal, 2000
-presented research results at the United Thermal Spray Conference in
Indianapolis, USA, 1997
-represented my professor on the Committee for Standards, DIN AA14/AGV7, and the Research Consortium for Welding and Cutting
-taught and graded student research projects and labs for prospective technical college engineers (equivalent to Bachelor of Science) and mechanical engineering students

Collegiate Assistant Department of Surface Technology,
University of Dortmund, Germany 1995 – 1996

-performed experiments on thermal spray devices (HP/HVOF, HVOF, APS)
-maintained and repaired thermal spray devices
-performed metallographical and ceramographical preparations
-performed, under the direction of an engineer, lightmicroscopical and electronmicroscopical investigations of thermally sprayed coatings
-performed material analyses using an Interactive Image Analyser (IBAS)
-determined hardness, bond strength and wear resistance of thermally sprayed coatings
-generated computerized graphics

Collegiate Assistant Department of Packaging and Trade Logistics,
University of Dortmund, Germany 1991 – 1995

-under the direction of a graduate engineer, independently prepared professional training measures and created presentation documents relating to materials selection and testing
-while co-working on various industrial projects, developed and conducted damage simulations – eg. electrical appliances
-evaluated environmental impact and performance of packaging materials

EDUCATION

1996 – 2002 University of Dortmund, Germany
Institute of Materials/Metallurgical Technology

Emphasis on Surface Technology, Especially Thermal Spraying
Scientific Employee,
Current Degree: "Doktor-Ingenieur"

Doctoral Thesis: Contribution to the Development of Thermally
Sprayed Wear Resistant Coatings for Lightmetal
Surfaces

Grade: A (sehr gut)

1986 – 1996 University of Dortmund, Germany

Study of Mechanical Engineering,
Emphasis on Materials/Metallurgical Technology
University Degree: "Diplom-Ingenieur" (MSc)
Diploma Thesis: Development of Wear Resistant, Hardparticle
Reinforced, Zirconia based Thermal Barrier
Coatings by High Velocity Oxygene Fuel Spraying
(HVOF)

Grade: A (sehr gut)

1985 – 1986 Military Service

1981 – 1985 J. G. Fichte High School in Hagen / Germany
Degree: High School Graduation

1975 – 1981 St. Jacobus Secondary School in Breckerfeld / Germany

1971 – 1975 Grade School in Hagen, Rummenohl / Germany

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 6635)

Go to Search Parameters...

Brief Description

Nearly 20 experiences as Enterprise level CAD/CAM/CAE software consultant.

PROJECT, INSTALLATION, COMMISSIONING, MAINTENANCE OF INSTRUMENTATION AND CONTROL SYSTEM

Drilling Fluids Program Supervisor/Well Site Supervisor

Over 21 years of management and hands on experience in a field of Procurement, Fabrication, Installation, Commissioning start up, Operation and maintenance activities. Related to Oil & Gas marine, On & offshore structure, Ship repair and EPC fabrication work, Petrochemical, Utility plant.

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Senior Chemist Supervising the sampling/testing Petroleum Refinery product streams and finished products and issuing Certificates of quality (COQ) for the products

IAM A QUALIFIED CORROSION ENGINEER AND IHAVE BEEN WORKING WITH WAHA OIL COMPANY SINCE JANUARY 1984, THEN WITH GECOL COMPANYTILL DATE,LAST TWO POSISION HELD , I- CORROSION SECTION SUPERVISOR (GIALO FIELD) 2- COORDINATOR OF HIGH COMMITTEE IN PROJECT DEPARTMENT.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

19 Years as “Instrumentation & Controls Engineer- PMT/ EPC Roles in Oil& Gas, Petrochemicals”.

Reservoir engineer / software engineer. 11 years reservoir engineering; 8 years software engineering in other industries. Keywords: reservoir modeling; simulation; upscaling; production forecasting; reserves estimation; well test analysis; Eclipse; VIP. Availability: immediate.

Senior Civil/Structural in Oil/Gas Field

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

I am a senior electrical engineer and project engineer with over 30 years experience largely gained within the Petro-Chemical, Liquid Natural Gas (LNG) and Power industries. Experienced in UK and overseas operations both on and offshore, Start-up, resident and project based engineering roles. A good

pipeline inspection and tyhird party inspection

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

B.sc in petroleum engineering from tulsa university ,oklahoma,U.S.A.,1985. work experience 23 years

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Geologist geophysicist interpretation

Civil Engineering from University of Indonesia (1989), 3 Years experience in engineering consultant company, 13 years in contractor company as project and HSE coordinator at various project (1991 - 2004), 2 Years as Supervisor at Petrochemical project, and 2 years as HSE coord at pipeline project.

Graduate with an Engineering degree having 20+years experience

HSE Engineer/ Senior HSE Engineer/ Deputy HSE Manager/ Permit to work co-ordinator/ Authorized Gas tester/ HSE Trainer/ Sea Survival holder/

Graduated in Mechanical Engineering. Have more than 20 years of Oil field experience. Domain: Drilling Engineering.

Petroleum Measurement Specialist Liquid and Natural Gas. Chemist and Lab Manager in LPG and Natural Gas. Measurement Supervisor for large pipeline company. Interested in challenging position in Measurement Field.

Mud Engineer

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

Geophysicist with more than 15 years international experience in geophysics for major oil and gas companies.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

I am a Process Commissioning Engineer having more than 18 years experience in pre-commissioning, commissioning, startup, operations, trouble shooting, performance testing and hand over of oil and gas facilities, refineries, gas to liquid plant and fertilizer plants. I have hands on experience in the

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,

process engineer

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC

Marine engineer, 1st Class Certificate and Offshore experience.

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

Project engineering as well as civil structural design experience in the oil and gas, industry and civil works design, project management and construction environment

I have 22 years of extensive experience from different Petrochemical plants, Oil & Gas , Power plants.

20 years combined working experience in Project Engineering, Construction, Design, Installation and power hook-up activity, Test and Commissioning of Electrical and Instrumentation Equipment including the Preventive and Corrective Maintenance

Telecom Contractor ,english speaking ,Bell System Trained, college degree in Telecommunications ,20 years plus Outside Plant Technician and AVAYA ACS PBX's seeks contract/fulltime work in Middle East or almost anywhere in the world.

Having strong Process and Operations background, diversified knowledge and experience of Oil Industry for approx. 25 years in Process Engineering, Operation, Projects initiation, Coordination and commissioning, Product and Market Development, Pricing, Techno-Economic evaluation, Client / Customer

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

Experienced with trouble shooting all aspects ships electrical installation and automation, DP Experience

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

painting and insulation supervisor - oil and gas industries

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out