Resume - Master Electrician \ Instrument Tech \ PLC Programmer

Misco Jobs

Resume #52828

CONTACT INFORMATION:
View contact information...

I carry a cell phone 24/7 but am currently finishing a project and it is always my policy that I do not have non project related conversations while I am on the clock. I would be happy to call back during lunch or after work. Please leave a message and phone number to return call.

Education;
Brainerd High School Graduate
Instrumentation/ Process Control 2 years St. Cloud AVTI.

Job or project specific education;
Allen Bradley PLC Training at Allen Bradley, Six different one week PLC specific courses.
Allen Bradley Drive Training at Allen Bradley, Two weeks.
Reliance Automax and Automax2 Drive systems Three weeks.
Four year Electrician Apprenticeship in an Industrial Environment.
Two year Millwright apprenticeship in an Industrial Environment.
Welding, Cutting, Rigging ect.

Experience;
Electrician 18 years
Instrument Tech. 7 years
PLC Programming 11 years
Drives AC and DC 15 years

Licenses;
Master Electrician
Journeyman Electrician
Electrical Contractor
2nd class A High pressure Boiler License

Projects of interest;

Installation and tuning of #6 Winder for Potlatch Corp. 1 year project involving 3 PLC 5s and 5 Allen Bradley Force drives. Scope aprox. 7m

Automation of the wet end of #6 Paper Machine for Potlatch corp. 1.5 Year project automating all control systems on the wet end using a DCS system to control 4 Allen Bradley PLC5s and 12 remote racks. Scope aprox.17m

Design and automation of machine fixtures for Acrotech Inc. 1 year project to design and automate machines to eliminate hand labor and reduce injuries in a plastics factory.
Scope aprox. 3m

All electrical and instrument work to facilitate moving a blow molding factory to another state. Worked in Minnesota and South Dakota for a year and moved an entire factory employing aprox. 200 employees. In addition to doing all electrical and instrument work to facilitate moving all the machines and support processes I had to coordinate with management and production to keep sufficient inventory levels while moving. Worked
80 to 95 hours per week for over ten months.

Installation and tuning of #7 Coater Drive systems. Installation, tuning, and networking of 11 Reliance Automax2 drive systems, as well as the replacement of all operator interface.
10 month project. Scope aprox. 9m

I am currently working on the SR Project on the Trans Alaskan Pipeline automating control
Equipment on a pump station so that it can be run remotely from Valdese. I chose to work on the SR Project to gain experience in the petroleum industry and gain more experience in class one division one wiring. This project will be over soon and I am seeking my next project. Scope aprox. 40m

All projects involved using a broad range of skills that I have developed in 22 years in Mills and Factories. I am a proficient PLC programmer and have excellent trouble shooting skills.
I have also done many other projects including packaging and conveying systems, Stretch wrap machines ect. My family is grown up and I have no problem with extensive travel.
I prefer larger projects with per diem and own a motor home. I own all tools and test equipment necessary as well as a laptop with commonly used PLC software on it. I am a turn key tech. and am used to working with limited support.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 7051)

Go to Search Parameters...

Brief Description

Many years of work and academic experinces with the AutoCAD software and some classes in the ESRI -GIS software.

NAME:JOHN GOODDY

Master Electrician \ Instrument Tech \ PLC Programmer

Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.

MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations

Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.

I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level

Static Equipment Mechanical Engineer

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Full hands-on maintenance, Working under extreme conditions

M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission

Linux/Storage Admin

Piping detail design isometric MTO and layout detailng etc

Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation

Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators

Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).

I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.

Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.

Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India

Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.

SENIOR PIPING / MECANICAL DESIGNER

Geotechnical Field Rep

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.

NAval architect

Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),

QA/QC Inspection Engineer

I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.

A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.

Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

Reservoir or Production Engineer

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.

Static equipment like vessel, tank and heat exchanger

BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

See resume body

Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out