Resume - I am a Chemical Engineer having more than 18 years experience in various Oil P...

Misco Jobs

Resume #530

CONTACT INFORMATION:
View contact information...

DATE OF BIRTH , AGE     :         18-05-1958 , 43 Yrs .

QUALIFICATION          :          Bachelor Degree in Chemical
Engineering,
B.E ( Chem ) , June -1982

PASSPORT NO     :        V 474013 Valid upto 16-10-2005

EXPERIENCE          :        18 Years in Oil , Gas and
Petrochemical
Processing Industries .

COMPANY - POSITION HELD

M/s Adma-Opco , Production Supervisor , Feb, 2000 to Jan 2001 , Abu Dhabi .

M/S Command Petroleum, Prod.in.Charge , Mar 1995 to Feb 2000 , India .

M/S UB Petro Products Ltd, Dy.Manager , Mar 1990 to Mar 1995 , India

M/S Southern Petrochemical Corp, Commissioning .Engr ,1988-1990 , India .

M/S Thirumalai Petro Chemicals, Chemical Engineer , 1987-88 , India .

M/S Tanfac Ltd , Chemical Engineer ,1984-1987 , India .

M/S Grasim Industries Ltd, Chemical Engineer , 1982-1984 , India .

During my career I have the following Commissioning Experiences .

1.    I was involved in the Erection , Pre-Commissioning , Commissioning and Operation of Sulphuric Acid Plants and Oleum Process Plants with Tamil Nadu Flourine and Allied Chemicals , Tamil Nadu , India . I was in charge of Sulphuric Acid Plants and Oleum Plants in the Years 1984-87.

2.    I was engaged in the Commissioning and Operation of Maleic Anhydride Petrochemical Process Plants of Thirumalai Petrochemical Plant in Tamil Nadu , India in the years 1987-88.I worked with them as their Shift in Charge .I had operated Distributed Control System panel and I am well versed in the DCS Panel Operations .

3.    I worked as a Commissioning engineer with Southen Petrochemical Industries Corporation , Madras , India .We were engaged in the Pre-Commissioning , Commissioning and Operation of Gas Sweetening Unit , Gas Dehydration Unit and Gas Dew Point Depression Unit for ONGC Hazira Gas Processing Complex , Surat , India . I was also involved in the Erection , Pre-Commissioning , Commissioning and Operation Of ONGC Second Phase Dew Point Depression Unit .I operated DCS Panel in a effective manner .

4.    I worked as a Dy.Manager with UB Petroproducts , Chennai ,India in the year 1990-95 .I was involved in the Erection , Pre-Commissioning , Commissioning and Operation of the Propylene Oxide , Propylene Glycol Petrochemical Process Plants . I always adhered to the Permit to Work system prevailed and implemented Safety measures in all aspects of the entire Plants Process Operations . I operated DCS Panel and I was well versed in the entire DCS Panel Operations .

5.    I worked as a Production In Charge with a British Petroleum Company
in Chennai , India in the years 1995-2000 .During that period I was in the Pre-Commissioning , Commissioning and Operation of Crude Oil / Gas Processing Plants involving Onshore / Offshore Locations . I commissioned and Operated Gas Dehydration Plant and Gas Dew Point Depression Plants . I was also involved in the Commissioning and Operation Oil seperation Unit and Water Injection Facilities .I always adhered to the Permit to Work System and Implemented Safety measures in the entire Plant Process Operations . I operated DCS Panel .

During my career I have worked in the following Processing Units:

# Offshore / Onshore Oil / Gas Plants Production Operations
# Crude Oil Stabilisation Units & De gassing units
# Gas gathering and Dehydration units
# Gas Sweetening Process Plants
# DCS Control Panel Operations
# Central production facility and Tank Farm
# Propane Refrigeration System
# Handling of Hazardous chemicals
# Various Chemical injection System
# Daily Production calculations
# Shutdown jobs
# Pigging of Crude Oil , Gas & Water Lines
# Operations of Water Injection plants
# Condensate Fractionating Units
# Dew Point Depression Units
# Gas Sweetening Units
# Carbon Di-Sulphide Processing Facilities
# Sulphuric and Oleum Processing Facilities
# Pthalic Anhydride Processing Facilities
# Maleic Anhydride Processing facilities
# Propylene Oxide Manufacturing Plants
# Propylene Glycol Manufacturing Plants
# Atmospheric Distillation Columns
# Vaccum Distillation Columns
# Azeotropic Distillation Columns
# Various Types of Reactors
# Vaccum Crysallizers
# Gas Absorption Units
# Catalyst Convertors
# Sulphur Furnaces
# Handling of Propylene , Ethylene , Chlorine Carbon Di-SulphideSulphuric
Acid , Oleum , Phthalic Anhydride , Maelic Anhydride etc .,
# Incinerator Units
# Different Types of Flare Systems.

    Details of Experiences

I have Worked with M/S ADMA-OPCO as a Production supervisor in their Zakum Central Super Complex Production / processing platform in offshore ,Abudhabi. We engaged in the production/processing of crude oil, condensate and natural gas. We processed 400,000 bbls of crude oil per day We also Processed 250 MMSCF of gas per day. We treated and Injected 800,000 bbls of Water per day to injection wells .

Worked with M/S COMMAND PETROLEUM Ltd , Chennai , India , as
Production In Charge for 5 years .We engaged in the processing of crude oil
and gas from the shores of Bay of Bengal . We processesed 65,000 bbls of
crude oil per day .

We had DCS Control systems for efficient operation of our Onshore
Processing Plants.
We receive crude oil from our Offshore producing platforms . We had 6 no’s
of Oil Producing platforms and Gas Producing platform . Each Platform has
more than Wells with all Safety and Emergency preparedness .
Our Platforms are unmanned and are App. 13 Kms from our Onshore
Processing complex .
We have our Own Telemetry control systems for operating the unmanned
platform’s .

I have operated Gas Treating and Gas Conditioning Plant ( For Dehydration
and Dew point Depression ) of Capacity 2 .5 MMSCUM/Day.
We Dispatch Crude Oil to HPCL Refinery , Vizag and Treated Gas to GAIL
Gas Grid .

I was Involved in On-shore Operations such as Crude Stabilising Plants with
Baker Panel facilities, Chemical Injection Section like pour point
depression, emulsifer,corrosion Inhibitor, Gas Compression and
Conditioning Sections, Propane Refrigeration Section,Glycol Regeneration
(Mono ethylene glycol) Section, Water injection and Gas Lift Sections, Crude
Oil Storage in Floting Roof Tanks and High Pressure Export System .

We had very efficient Pigging operating systems for our Oil and Water Pipe
lines .
We had API Seperator unit for effluent treatment measures and Incinerator for
solid wastes and disposal .
We had very efficient Safety measures with excellent permit to work systems

I was Involved in Operation of Power Generation by two Solar Gas Turbine
Generators (each of 2600KW -Centaur - 40 make ) and Diesel Engine
Generators.

Eqipment’s Handled :Spill Over Weir Type Three Phase Separator (H.P.
and M.P.),Two Phase L.P. Separator Caterpillar Gas Driven(1500KW)
Reciprocating High Pressure Gas Compressors (Double Stage),
Propane Refrigeration Compressor (Screw Type), Gas Chiller,Glycol
Regenerator,     Hot Oil Heater, Flare systems , Floating Roof Crude
StorageTanks , water injection systems of 50,000 bbls per day, which
Includes treatment filters and associated dosing chemicals .


Worked as a Deputy Manager with M/S UB PETRO PRODUCTS LTD ,
MADRAS .In their PROPYLENE OXIDE and PROPYLENE GLYCOL Unit
for 5 yrs.I have very efficiently operated DCS Panel .
Involved in operations of different sections of Propylene oxide and Propylene
glycol     plants . Loading and Unloading of Hazardous chemicals such as
Chlorine, propylene, Propylene Oxide, Ethylene Oxide, waste air
Dechlorination units, Milk of lime Plant.
I was fully involved in production planning , manpower planning ,
Preparing daily and monthly production reports and executing planned and
shut down maintenance jobs .
Equipment’s Handled : Propylene Oxide continuous reactor, propylene
evaporator,     Propylene Recycle compressor (MAPRO) Sliding vane type,
Separators, Absorption and     Adsorption columns, Reboilers,
Multiple and Falling film Evaporators , Heat Exchangers, condensers, Steam
Ejectors, Distillation Columns with Bubble cap and sieve trays, Hydro carbon
storage Bullets, Chlorine storage Bullets, Chlorine Liquefaction units
and Waste water disposal system.

Worked as a Chemical engineer with M/S THIRUMALAI CHEMICALS ,
TAMILNADU . I worked in their PHTHALIC and MALEIC ANHYDRIDE
Complex .
I had operated DCS Control Panel . I was working as shift in charge looking
after entire shift activities .

Involved in operations of catalytic reactors, pre-heaters, evaporaters, gas
coolers, switch condensers, vaccum distillation columns with plate type,
trays, reboilers, Heat exchangers, condensers, Vacuum crystallizes,
Ejectors, Kettle type reboilers, scrubbers, Blowers, Steam driven
blowers, centrifugal and gear pumps, reciprocating pumps, Instrument air
compressors, Air drier units, Hot oil systems, O-Xylene and
Benzene Storage tanks.

Worked as a Commisioning Engineer with M/S SPIC Ltd , Chennai . We
were engaged in the commissioning of ONGC HAZIRA GAS Processing
Complex I have operated DCS panel and actively involved
in pre-commissioning and commissioning of Gas sweetening unit , Gas
dehydration unit, Dew point depression and Condensate fractionating unit .


I was involved in pre commissioning and commissioning of Gas dehydration
unit and Dew point depression units of 5.5 Million cubic meter of sweetened
gas per day .


Worked as a Chemical Engineer with M/S TANFAC LTD , TAMIL NADU .I
worked in their SULPHURIC ACID and OLEUM PLANT.
Had operated absorption columns , catalyst converters , sulphur furnace , air
blowers and distillation columns .


Worked as a Chemical Engineer with M/S GRASIM INDUSTRIES ,
KARNATAKA .
I worked in their CARBON DISULPHIDE and SULPHURIC ACID PLANTS .

I worked as a shift in charge and later was full in charge of Carbon disulphide
plants .
Had operated furnaces, adsorption columns, Ammonia refrigeration units ,
gas holders and distillation columns efficiently .

Job Responsibilites

I was involved in the Daily activites of the Complex such as Meeting the
Production Targets ,in Oil Production ,
Gas Production / Processing and Water Injection with utmost Safety in mind .
Day to day Chemical Consumptions were carried as per the Standards set
by the Management & also as per the Requirments for the Process .

Pigging of Process lines , Water Injection Hearders / Lines , Sub-Sea trunk
lines , Gas lines & Well head lines
To the Processing Complexes were carried out in regular , Stipulated
durations in a efficient and Safe means .

Handled Operators and other Sub-ordinates in a well mannered way &
explaining them the Importance of Safety of the Plant , Personnels &
Equipments. Updating them with the Latest developements and Projects of
the Complex .

Emergency Drills were conducted and Safety meetings among the
Personnels of the Plant were also conducted . Emergency Prepardeness
were always given top priority . Hazards of Chemicals and Process
Fluids were explained to Plant Personnels in time to time for Updating their
Knowledge .

Provide technical and operational support for the day-to-day operations of the
Facility, as required, to ensure operation in accordance with the design intent,
and to maximise value extraction from the field.

Forecast oil production such that sales can be scheduled, and to deliver same
On specification to the customers, as per the agreed contract.

Liaise between the Facility personnel and Petroleum Engineering ensure the
field wells and production Systems operated to ensure optimal recovery of
reserves in accordance with the Field Management Plan and Company
procedures, and the Business Plan.

Liaise between the Facility and Training Coordinator to determine training
requirements. Ensure compliance With the Facility, Safety and Environmental
Management Systems.

Coordinate facility input into the engineering change process. Coordinate
preparation of the Production Operations Temporary Work Instruction.

Recommend, test & implement changes to operating procedures &
production facility to optimize Production .
Improve safety/environmental performance of the Facility. Review and amend
operating procedures and work instructions for technical accuracy and
operability Ensure that any changes to operating parameters are
properly documented.

Develop Plant Trials to optimize selection and use of production chemicals,
whilst ensuring product specifications are met. Develop scopes of work for
studies and plant Modification which are approved and
ensure that the Studies are carried to the highest Quality completely within
budget and schedule.

Provide technical guidance to ensure product specifications and overall
system availability is achieved in the short and longer term.
Arrange for preparation of the Facility section of the Production Operations
weekly and monthly production reports.
Technical review of changes to production operating parameters and
practices to improve effectiveness, efficiency, safety, environmental
performance and reduce risks. Carry out HAZOP as Facility representative.

Training programmes

1.     Production - processing operations by J.M. campbell, USA.
2.     Hazop and Hazid trainings from det norske veritas(DNV), Netherlands.
3.     Crude oil storage tanks storage, maintenance and cleaning , Ibc asia.
4.     Survival in sea course from academy of maritme studies.
5.     Gas turbines and Gas engines operations from Caterpillar, Inc.
6.     “ Permit to Work “ training in Adma- Opco , Abu Dhabi .

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 6432)

Go to Search Parameters...

Brief Description

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

6 years experience in the field of Mechanical, Piping Engineering Design / Drafting. A variety of successful projects for oil & gas, chemical and cement plants. Design, Drafting, CADD, and checking experience that includes supervision, conceptual layout, piping design, pipe supports, fabrication dra

Instrument and metering technician

Mechanical Designer with over 10 years of experience in plant, equipments and structural drafting of oil & Gas industries, Seeking a challenging Respectable and Responsible Assignment in the field of structural Engineering, that encourages continuous learning and Creativity, Provides Exposure to ne

A well rounded drilling personnel with a unique experience in drilling and completion / work over operations

CADD/Draftsman (Multi-Discipline), can well operate AutoCAD R14, 2000, 2002, 2004,2005,2006,2007 Autocad Building System (ABS 2007.1). Computer literate in Microsoft Excel, Word, Power Point & Photo Editor.

Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.

Quantity Surveyor/Estimator (Mechanical)

Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction

Sr. Structural Engineer with 8+ Yr of Experience in the field of oil & gas.

I have 10 year experience on Instrument (5 year in Oil&Gas Industry as Instrument Engineer and 5 year in Sales & Marketing Engineer (process instrument)

- Good at English and drilling software.

16 years of experience in the field of Industrial Chemical Cleaning, Water treatment, Chemical handling, Equipment erection and demolition either Business development or project Implementation. I ca

Prepare plot plan and isometric drawings. Prepare plan drawings by manual drafting and by AutoCad, Microstation and Plant Design System (PDS). Material take-off and back checking. Incorporate changes and revisions on P&ID, communicates and interfaces with other engineering disciplines.

Chief Engineer qualification (any horsepower)

Graduate engineer, very dynamic lookng for drilling career in oil and gas Exploraration.

Having 17 years of professional experience in the field of Instrumentation and having involvement in Project Management, Detailed engineering, Project Execution – EPC, Commissioning, Completion and Hand over of the projects in the field of Oil & Gas – On shore, Petrochemical, Power and Process pla

Extensive experience in electrical mechanical completion, pre-commissioning, commissioning and operation of drilling rigs, FPSO’s, power plants & other projects including oil & gas in Africa, Asia, Australia, Middle East and South America.

•M.Sc. in Geology with specialization in Petroleum Geology and Biostratigraphy. •Working as a Geological Consultant and providing Wellsite Geological Services to the clients within Canada and overseas.

20-years experience in the oil exploration industry (12-years in the field and 8-years in the office). Present position as Project Coordinator for Baker Hughes INTEQ. IWCF Well Control Supervisor Level (Surface BOP) and LRQA Internal QMS Auditor. BSc. Ongoing MSc in Petroleum Engineering.

16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).

I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.

Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.

See resume

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

18 years of experiance in handling L.T and H.T motors in power and steam plant

Sr Drilling Engineer, Night Drilling Supervisor, Contracts Engineer, Trainer, Operations Planner

Project Manager with 9 yrs experience PLC,DCS,SCADA based Industrial Automation and Power Projects

I have 9 years of subtstantial experience in piping design.

EEng, MBA and a partial (ongoing) Master in GISc. 16 years designing, developing and implementing GIS. Strong experience on MapInfo / MapBasic development, and on several MapInfo products and other GIS and computer languages. Also experienced in Project Management, QA and as Technical Instructor

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

• Using STAAD and AUTOCAD for Design and Detailing of Buildings and Civil Engineering Structures. Design and construction of pipeline, building and civil engineering structures, Pipeline integrity assessment and asset management , ISO 9001:2000 Qulaity Management System lead Auditor ,

Sr. Drilling & Completion Consultant

Installation, Wiring, Loop checking, Calibration commissioning of new electrical instrument and project

Petrophysicist (Senior Geoscientist) with almost 7 years experience, Skills: Log Analysis and interpretation (Cased Hole/Open Hole) Integrated core and log data analysis, petrophysical moddeling, reserves evaluation, base knowledge of seismic interpretaion

Firoz Khan, A NACE CP Level 2 , have had a great deal of corrosion / Cathodic Protection experience in Pipelines, Above/Under ground storage tanks, Jetty & Offshore Structure. Have done a lot of CP Surveys also.

I have M.Sc. in Mechanical Engineering and as a Piping Engineer I have 7 years experience both in design and construction phases of oil, gas and petrochemical projects led by International firms like TECHNIP and LINDE.

My career ambition is to be working for a firm that allows me to work with Electrical Power Generation, High Voltage/Low Voltage Power Supply Systems, Sub-stations, Distribution, Transmission Lines, Protection and Metering Scheme Design, Installation, Testing, Modification and Maintenance. Qualific

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out