Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #53166 next resume »»
CONTACT INFORMATION:
View contact information...

Objective: Well Site Geologist
QUALIFICATIONS
„X 6 years of experience in wellsite geology
„X One year of core description, core logging, core porosity, permeability, and fluid saturation analysis, core sampling
„X Over 10 years experience in geological and geophysical research
„X Proven abilities in integrating geological, geophysical, and petrophysical studies for reservoir description, hydrocarbon detection and potential play/target evaluation
„X Efficient in Striplog, SDL_9000 Mud Logging, Accumap, Geovsita, GeoFrame, Word, Excel, and PowerPoint,

PROFESSIONAL EXPERIENCE
2005-2006 Well site Geologist
„« Carried out geological logging
„« Pick up core point, described the cutting, core, oil sands, coal, run CBM gas desorption, analyzed T-V curve and evaluated production potential
Completed the followings:
Skyrock Wellsite Ltd, Calgary
Bonavista Whitecourt 03-16-60-12W5, Bonavista Hz Garrington 7-14-33-3W5M
Bonavista Garrington 15-14-33-03W5M
Serpa Petroleum Ltd, Calgary
Oil sands core projects in Fort McMurray area
CBM Solution Ltd, Calgary
ECA FORSTER 15--18-42-16W4, THUNDER BYEMR 7-19-34-18W4, PROSPEX BRANT 1-32-17-26W4, ECA DAVEY 13-29-33-28W4, Chamaelo Exp Penhold 7-36-35-27W4, Eca Penhold 7-25-36-27W4, Chamaelo 104 winborn 13-24-33-26W4, ACL NGL Twibn 4-18-32-25W4, ECA ECOG Vulcan 6-25-15-26W4, ECA ECOG Hussar 8-20-27-21W4, ECA 102 Bashaw 102/6-23-41-23W4, ECA TWIN 3-13-30-25W4, CNRL Buffalo Lake 3-12-40-21W4, Ember Thunder Fenn BV 4-22-36-19W4, Talisman Wetwin 15-10-45-24W4, Husky Milo 9-28-18-23W4,
2004 Geologist
Geology, AGAT Laboratories
* Described core lithology, and analyzed the core petrogphycical properties
2003 Geologist
Capstone Energy Ltd
„« Evaluated Viking Sands reservoir
„« Determined potential target zones and areas
1998~ 2003 Geophysicist
China Research Institute of Petroleum Exploration and Development Corporation, Beijing, China
Oil and Gas Distribution of Qian Mi Qian Buried Hill
* Interpreted seismic sections to evaluate structures of Qian Mi Qiao Ordovician carbonate buried hill in Huang Hua Depression, Tian Jin, China
* Found a new trap, 49.9km2, petroleum area is 19.6 km2, the natural gas reserve is 145¡Ñ108 m3, and the condensate is 374.4¡Ñ104t
* Designed 5 wells' locations by the structure and seismic attribute analysis, and reservoir evaluation in Qian Mi Qiao Buried Hill Area.
1990~ 1998 Geologist
Geology Research Institute, Da Gang Oil Field, China
Oil and Gas Distribution of Huang Hua depression, Tian Jin, China
* Collected the stress information and analyzed the stress of the two flanks of the boundary normal faults
* Discovered two structural style models: graben-horst and half graben-horst, including graben-type listric normal faults and blocks, growth faults and rollovers at each side of depression
* Concluded the oil and gas distribution regulation types determined by the tectonic styles, and proposed 5 exploration wells.
Analysis of Abnormal pressure of Qi Kou Depression
* Collected seismic velocity, acoustic log data, drilling engineer parameters to analyze abnormal pore pressure
* Built a model and an equation to calculate formation pressure in mudstone and shale
* Compiled the software to predict pore pressure while the well is being drilled

1996 ¡V 1997 Geologist (well site)
APACHE (an oil company of the United States), Bohai Bay, China
„« Forecasted pore pressure with drilling engineering parameters
„« Analyzed drilled gas and evaluated hydrocarbon components
„« Appraised reservoirs with geology mud logging data

1987 ¡V 1990 Geologist (well site)
Da Gang Geology Mud Logging Company, China
„« Completed 12 wells penetrating target zones
„« Made accurate core point pick
„« Described cuttings, cores, analyzed fluorescence and gas detection oil shows
„« Analyzed porosity and permeability of carbonate and sandstone cores
EDUCATION
Research Institute of Petroleum Exploration and Development, Beijing, China
Master's Degree (Geology of Exploration and Development)
Jianghan Petroleum Institute, China
Bachelor's Degree (Geology of Exploration and Development)
ADDITIONAL TRAINING
Software, GeoFrame, in Geoquest, Schlumberger, Houston, Texas, USA 1999

View contact information...
«« previous resume next resume »»
Search Results (Resumes 201 to 250 of 6396)Go to Search Parameters...
Brief Description
Senior Civil/Structural in Oil/Gas Field
Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.
pipeline inspection and tyhird party inspection
Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.
Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.
Mechanical and gas (natural) handing skills, repair of "Novopegneon” and “ General Electric” equipment, solid Knowledge of automatic Gas turbine equipment.
Instrument / Controlsystems Engineer
Extensive knowledge in control system design for industrial applications specially with ABB and YOKOGAWA DCS systems ,software design and software programming with C, C++,Visual C# and Visual Basic .
Geologist geophysicist interpretation
Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.
Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress
PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.
SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE
Almost 18yrs experience in oil & gas company (CAD/INtools Administrator
A highly focused, enthusiastic and innovative Petrophysicist, with almost 18 years practical work experience in the Oil & Gas industry, both with a major service provider (Schlumberger) and major Oil & Gas producing companies (Qatar Petroleum, Zadco, Rasgas, Shell). Determined and results oriented.
Seventeen years of combined experience of Operation and Technical support to maintenance unit as reliability engineer in safety dominated Nuclear Power Plant. Where safety is the utmost goal beside operation of the plant and production. Extensive experience in reliability centered maintenance
I am a Process Commissioning Engineer having more than 18 years experience in pre-commissioning, commissioning, startup, operations, trouble shooting, performance testing and hand over of oil and gas facilities, refineries, gas to liquid plant and fertilizer plants. I have hands on experience in the
Chief Metallurgist
Multi-Disciplined NDT Technician/Inspector with Rope Access. UT Level 2, MP Level 2, PT Level 2, IRATA Rope Access Level 1. Int Offshore Survival Certification.
Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems
Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken
I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,
process engineer
I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC
Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience
A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis
More than 28 years of experience in oil industry
22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities
Experienced Completing and Producing Petroleum Engineer
Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field
Senior Corrosion Engineer with 14 years experience at metallurgy fields especialy corrosion & corrosion control. expert at painting, insulations,cathodic protection, materials selection, corrosion inhibitors, corrosion monitoring, coatings inspection . I am serious at work.
An astute techno-commercial professional having 13+ years (of 15+ years) diversified experience in grid connected wind energy sector.
Top-notch Instrumentation Technologist and Process control Team Leader of an US based MNC for the Central Engineering Division in Mumbai to meet the requirement of Asia Pacific and Europe who are pioneer in the manufacture of specialty chemicals with over 18 years of notable experience in the field
High level technical knowledge and understanding of execution methodology on engineering aspect. About 5 years in a QA/QC jobs engage in Power Plant Construction under the management of Japanese Firm. Had a background on Piping/Mechanical Designs using Autocad. Advance computer literacy.
As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability
Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,
Highly qualified, and experienced Fully conversant with all aspects of evaluation and testing of drilling mud. Expertise in testing of all the mud parameters
I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.
Control & instrumentation
KEY COMPETENCIES
Gradute chemical engineer
A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company
Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.
Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage
I am very talented and a hard worker. I have a good eye for any type of construction.
24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:
Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.
7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .
Significant experiences in analytical and computational modeling in both structural and thermal-fluid areas. Working on offshore engineering design in shallow and deep water, which includes subsea pipeline, riser, and stinger design.
Project engineer with management skills
First   1   2   3   4   [ 5 ]   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com