Resume - OBJECTIVE Seek a full time position as a reservoir engineer in the area of well ...

Misco Jobs

Resume #5330

CONTACT INFORMATION:
View contact information...

KEY QUALIFICATIONS A diversified professional engineer with several years experience in petroleum industry. Specialist in reservoir/petroleum engineering, oil field development. Key competencies include new well planning, well performance and optimization, well testing and analysis, hydraulic fraction design, estimation of oil and gas reserves, reservoir performance analysis and prediction, workover and stimulation, acidizing, water flooding and enhanced recovery technologies.

EDUCATION
1994 - 1997 / Post-graduate studies, Geological & Reservoir engineer Dept., Tomsk Polytechnic Univ., Russia
Post-graduate Project: Based on geological, geochemical and geophysical investigations developed a criterion for the development of Vakh oil deposit of Western Siberia Petroleum Province.
1989 - 1994 / Ms Degree, Tomsk Polytechnic Univ., Geology (major), Petroleum Engineering (minor), exploration and development Ms Thesis: Novopurpeiskoe field development analysis.

EXPERIENCE
11/2003-present / Reservoir engineer, Reservoir development department, Engineering center of Rosneft oil company (There is several oil production plants in Rosneft oil company, such as JSC Rosneft - Purneftegas, JSC Rosneft -Sahalinmorneftegas, JSC Rosneft - Krasnodarneftegas etc.)

05/2002-10/2003 / Reservoir engineer, Reservoir enhancement department, YuKOS, JSC Yuganskneftegas, Nefteugansk, Western Siberia

02/2001-05/2002 / Chief, Development department, Rosneft, JSC Rosneft - Purneftegas, Gubkinsky W Siberia.

12/2000-02/2001 / Reservoir engineer, Production-technical department, Rosneft, JSC Rosneft - Purneftegas, Gubkinsky W Siberia.

11/1999-12/2000 / Chief, Well test shop, OGPM (Oil Gas Production Manufacture) Tarasovskneft, Rosneft, JSC Rosneft - Purneftegas, Gubkinsky W Siberia.

10/1998-11/1999 / Field specialist on reservoir pressure maintenance, Reservoir pressure maintenance shop, OGPM (Oil Gas Production Manufacture) Tarasovskneft, Rosneft, JSC Rosneft - Purneftegas, Gubkinsky W Siberia.

8/1998-10/1998 / Field specialist on well test, Well test shop, OGPM (Oil Gas Production Manufacture) Tarasovskneft, Rosneft, JSC Rosneft - Purneftegas, Gubkinsky W Siberia.

1994 1997 / Research Assistant & Teaching Assistant, Geological & Reservoir engineer Dept., Tomsk Polytechnic Univ., Russia

Summer 1993 / Summer Intern, Rosneft, JSC Rosneft -Purneftegas, Gubkinsky W Siberia,
Field operator at well service.
Summer 1992 / Summer Intern, Rosneft, JSC Rosneft -Purneftegas, Gubkinsky W Siberia,
Field operator at well service.

TRAINING COURSES ATTENDED RECENTLY
Course title / Offered by / Date attended

Hydraulic Fraction & quality control / Network of Excellence in Training (NExT) / January 2004
Hydraulic Fraction application / Enhanced Well Stimulation, Inc. / August 2003
Apply YuSim simulator in reservoir development / YuKOS / June 2003
Reservoir engineering and management workshop / Southern Alberta Inst. of technology in association Canadian Petroleum Training Inst. / January 2003
Formation damage workshop / Southern Alberta Inst. of technology in association Canadian Petroleum Training Inst. / December 2002
Well performing / YuKOS Training centre / November 2002
Training course for Applied reservoir stimulation and seminar for Eclipse package / Network of Excellence in Training (NExT) / June 2002
Basic reservoir engineering / Network of Excellence in Training (NExT) / May 2002
Modern well test methods / Well Testing Specialists Society / Mar. 2000
Oil and gas management program. /Bavarian International Associates Inc. Dallas, Texas. / Oct.

PROFESSIONAL MEMBERSHIP
* SPE (Society Petroleum Engineers)
* Well Testing Specialists Society (Russia)

LANGUAGE SKILLS: Excellent skills in Russian and English

SIMULATION and SOFTWARE EXPERIENCE
* Substantial experience with software packages like Surfer (map builder), other software packages for development and estimation of EOR effects.
* Working knowledge of Perform, PipeSim, FrontSim and Eclipse.

COMPUTER SKILLS
* Have working knowledge of FoxPro, word processing package Microsoft Windows-2000, and software packages Microsoft Excel (with programming in Macros), Microsoft Word, Microsoft PowerPoint, Microsoft Outlook, CorelDraw.
* Experienced with desktops and laptops - IBM-PC
EXPERIENCE DETAILED INFORMATION

Rosneft oil company, Engineering center, reservoir engineer

* Working up well performance, frac and waterflooding performance projects
* Determine and co-ordination of well candidates for mechanical/electrical changes to improve performance
* Co-ordination well candidates for frac
* Analyze performance of downhole pump
* Design possible modifications to improve existing systems
* Analysis of reservoir displacement efficiency from well performance and reservoir simulation model results
* Analysis by material balance of oil fields current development state.
* Activities effectiveness evaluation.
* Monitoring new wells entry.
* Work with R&D institutes and other research organizations which work for Rosneft oil company

Yukos, JSC Yuganskneftegas, reservoir engineer
* Oil production planning with consideration of new wells entry and enhancement, frac and other activities.
* New well planning.
* Research of ways of enhanced oil recovery with consideration of oil production plans fulfillment, development projects, license agreement, pipelines delivery and equipment capacity.
* Analysis by material balance of oil fields current development state.
* Activities effectiveness evaluation.
* Monitoring new wells entry.
* Work with R&D institutes and other research organizations which work for Yuganskneftegas on oil field development projects.
Rosneft, JSC Rosneft - Purneftegas
Development department, chief
* Oil production planning with consideration of new wells entry and enhancement, frac and other activities.
* Offers and technical assignments preparation to introduce clarity into development projects.
* Activities planning.
* Activities effectiveness evaluation.
* Developing EOR plans.
* EOR effectiveness evaluation.
* Work with R&D institutes and other research organizations which work for Purneftegas on oil field development projects.
* Recommending to upper management cost effective and value added advanced technologies for improvement of recovery and exploitation of additional reserves.
Rosneft, JSC Rosneft - Purneftegas
Production-technical department, reservoir engineer
* EOR effectiveness evaluation.
* Supervision for Severo-Komsomolskoe oil field development.
* Supervision for reservoir pressure maintenance system work.
Rosneft, JSC Rosneft - Purneftegas
OGPM (Oil Gas Production Manufacture) Tarasovskneft
Well test shop, chief
* Management of geological and technological departments. Work of geological department consisted of construction of geological structures and oil layers correlation diagrams, testing of oil and injection wells and interpretation of test results, development maps construction, participation in the development current analysis. Technological rating of mechanized wells the underground equipment an overall performance.
Rosneft, JSC Rosneft - Purneftegas
OGPM (Oil Gas Production Manufacture) Tarasovskneft
Reservoir pressure maintenance shop, field engineer
* Monitoring injection wells work on Tarasovskoe oil field (400 injection wells).
* Evaluating injection wells for workover design programs and procedures.
* Assessing injection wells for stimulation and designing programs and procedures for stimulation.
* Coordinating activities of workover rigs and oil field service companies.
* Designing injection well test programs.
* Designing injection well logging programs.
Rosneft, JSC Rosneft - Purneftegas
OGPM (Oil Gas Production Manufacture) Tarasovskneft
Well test shop, field engineer
* Designing well test programs and evaluating test results.
* Development maps construction.
* Construction of geological structures and oil layers correlation diagrams.
Tomsk Polytechnic Univ.
Geological Exploration Department
Research Assistant & Teaching
Based on geological, geochemical and geophysical investigations developed a criterion for the development of Vakh oil deposit of Western Siberia Petroleum Province, Russia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 6396)

Go to Search Parameters...

Brief Description

I started my experience as a offshore engineer and now i am working on pipes and spools for a turkish factory in china

Oil & Gas Process Technology / Senior Process Engineer

I am Geologist with Master degree at Texas Tech University and I am working in Reservoir Engineer and Petrophysics. I have 10 experience at oil industry

i graduated from university in July 2001 after successfully completing bachelors and masters degrees in mechatronics engineering, i am extremely interested in a career in the offshore industry especially in the area off drilling and MWD/LWD

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

A competitive technical position in the Engineering field, where my skills can be further applied and developed.

Piping/Civil/Structural design and drafting. AutoCad 2002 certified.

HSE advisor with 12 years experience in the oil and gas industry, in on shore and off shore construction projects. Excellent knowledge about international standards and practices to achieve safe job sites.

I am a graduate surveyor from New Zealand Looking for opportunities in the exploration industry. New Zealand Graduates are world renowned for their high quality of work, a reputation I intend to uphold.

A highly qualified and experienced Telecommunication Engineer with over 13 years in all aspects of Telecom. Engineering with international companies in the middle east.

Seeking a Challenging Assignment in Instrumentation Running Maintenance / Planning / Construction Engineering opportunity leveraging my Skills, Experience With an organization as an Instrument Supervisor / Inspector / Specialist

DCS Engineer with Instrumentation background who has been involved in Power Plant and Oil & Gas jobs worldwide in an engineering and comissioning role with clients engineers.This role included leading a team of engineers and management of various systems.

As my resume indicates, my career spans more than 4 years of progressive experience and professional training in Reservoir, Production, Surface and Facilities Engineering, with experience in areas such as Research, Technology, Sales and some Field Operations.

Project Planning/Scheduling and Controls Engineer with 7 Years of rich Inter/National Experience in Oil/Gas & Chemicals (PRIMVERA known)

6 Years professional Experience in PLC, SCADA & HMI Programming

Petroleum Engineer with more than 23 years of total experience as a professional in the Oil and Gas Industry. Where I developed knowledge in Exploitation, Production, Treatment and Delivering of petroleum, gas and effluents water.

Instrumentation, Control system, quality and compliance Engineer, fluent in English, French and Arabic

Sr. Instrument Technician

I am a diploma holder in electrical engineering, having 10y experience in electrical & instrumentation designing and drafting for oil & gas, petrochemical projects. Also worked for leading companies (Adco, Adma-Opco, Enoc, Technip-Auh, Zadco etc)

Installation,Maintenace,Servicing of Diesel & Gas Engines. Maintenanceof Steam&Gas Turbine, air&gas Compressors,Pumps,Turbochargers, boilers, vessels, Exchangers and Piping. Corrective, Preventive, Refurbishment maintenace planning using SAP CMMS, MS Project. Knowledge of API,ASTM,ASME,DIN standards

Engineering executive with over 11 years of intl exp, in the positions of increasing responsibility in renowned EPCC companies in Oil & Gas and Power industries. Reputation for consistently beating the time deadlines. Fully capable of effective management of large engineering projects.

OBJECTIVE Seek a full time position as a reservoir engineer in the area of well performance, water flooding performance, reservoir recovery mechanism, and reservoir characterization. Especially interested in multi-discipline teamwork.

looking for QC/NDT Engineer

Front end/detail design for refineries, upstream oil & gas, petrochemical plants. Control and automation systems for oil and gas projects. Experience in managing large size engineering work. Project management, planning, cost control functions associated with LSTK projects.

Presently working as an Inspection Engineer for their contracts in P.I.C. running plants of UREA 3150MTD AND NH3 (AMMONIA) 1880MTD PLANTS at Shuaiba, Kuwait.

PhD in Process Integration, Experience in chemical process synthesis, design, and optimisaiton, research in separation processes, synthesis of batch distillation processes, reactive distillation, pressure swing adsorption

10 Years of Working Experience as Planning/Scheduling Engineer, Cost Control Engineer and Quantity Surveyor to Several Projects in Saudi Arabia, Algeria, Singapore & Japan. Expert Level in Primavera & Microsoft Office, MS Project & ACCESS.

Field of expertise includes the following: AutoCAD releases 10 to 14, 2000 and 2002. Familiar with AutoCAD, Microstation & Microsoft (office) software

Education: HNC in ships engineering. Work experience: 12 years as ships engineer on tankers, 1,5 years ass. maintenance manager of a liquid bulk terminal in Thailand with products such as styrene monomer and ethylene and 7 years as maintenance manager in this liquid bulk terminal.

• Quantitative earth scientist • Strong analytical skills • Advanced technical and computer skills • Excellent multi-lingual communication skills • Significant international experience

Strong verbal and written communications skills, highly organized, proven ability to plan, detail oriented, self-motivated, dependable, ability to interact well with customers, employees, at all levels of management. Willing and available to travel (Domestic and International)

18 yrs of EXPERIENCE in O&M FIELD AND CONSTRUTION.WORKED IN WORLDS LARGEST REFINERY PROJECT AT JAMNAGAR,ANDIN POWER PLANT,AND PRESENTLY IN INFOCOMM PROJECT.THROUGH KNOWLEDGE ABOUT POWER GENERATION AND DISTRIBUTION SYSTEMS, AUTOMATION, CONTROL ENGINEERING, MOTORS, PUMPS.

This is my resume which is appropriately suited for all engineering and operations jobs.

I have 12 years experience in the Oil & Gas industry on the IT & Telecommunications area. My last work experience was with CMS Energy Oil & Gas as the IT & Telecommunications Manager for West Africa family based in Equatorial Guinea.

Master of Science in Petroleum Egineering , Bachelor of Engineering in Petroleum Engineering

CAPABILITY THERE BY CONSIDERING THE QUALITY IMPLICATIONS OF ALL WORKS UNDERTAKEN BY RECOMMENDING ACTIONS RESPECT TO THE PROJECT SCHEDULE AND ACCEPTANCE ENGINEERING PRACTICE THERE BY MAINTAINING UNINTERRUPTED PRODUCTION WITH QUALITY AND STANDARD

Procurement & Supply Chain

A position of dynamic and energetic person to work as a "Process Engineer" with growth, potential and challenging environment to utilize my strong interpersonal abilities and technical skills for achievement of organization wellbeing.

Seismic Acquisition design and Seismic Acquisition Field Supervisor.

•Extensive hands-on, good knowledge and 4years solid working experience in Project management ,calibration, testing, design, application, installation, repair, troubleshooting and commissioning for wide-range of Electrical, instrumentation and controls of FPSO, oil and gas, petrochemicals, pharmace

Senior Geophysicist with 8 years experience in E&P company, solid background in structural and petroleum geology. Experienced in prospect generation and evaluation, total command over Windows Office suite (Word, Excel, Power point), fluent in English and Arabic.

More than three years of experience in start-up and operation of PET resin and polyester yarn plant as an Instrumentation Engineer. Hands on experience in Fisher Rosemount Delta V DCS and plant instrumentation and controls.

Sr.pds piping designer with 11 years in layout and detaling work.

Supervisor and leader of Electrical and Telecommunication department activities in engineering, procurement and construction services in OIEC group

Experience of Design of material handling equipments, Pipe & flow analysis, Corrosion Engineering, Mechanical software like Inventor,Autocad,Catia

I amMsc Electronics ,Good Computer Hard ware& Software Knowledge,DCS , PLC & Field Instrumentation

Electrical Engineer - Power Plant Operation and Maintenance

5yr experience in Piping Design (PDS), Layout Planning, Project Planning & Management, Erection supervision & support.

An HND holder in Electrical/Electronics Engineerin with diverse experience in industrial maintenance and installation. Good understanding of Marine and Oil and gas enviroment.Excellent negotiation and and problem solving skills.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out