Resume - NDT inspector LVL II

Misco Jobs

Resume #53430

CONTACT INFORMATION:
View contact information...

NAME: JABBAR K. SHNAWA

RESIDENT OF: LIBYA – TRIPOLI

BIRTHDAY: 10th JUNE 1965

GENDER: MALE

MARITAL STATUS: SINGLE

PASSPORT No.: H 0314735

NATIONALITY: IRAQI

QUALIFICATION: Bsc. IN MECHANICAL ENGINEERING

PROFESSION: WELDING & NDT INSPECTION ENGINEER

LEVEL II ( RT –UT –MT-PT )

GRADUTION: UNVERSITY OF BAGHDAD – COLLEGE OF

ENGINEERING - MECHANICAL DEPARTMENT IN 1988.

OBJECTIVE:

I would like to work as QC ENGINEER with experience as WELDING & NDT inspection engineer and to work with SMAW, GMAW. SAW,GTAW, FCAW and PAW processing, LEVEL II in RT –UT – MT –PT and experience in Preparing and Evaluation of WPS, PQR and WPQ according to ASME, API, AWS and BSI, and making qualification and testing of welders according to ASME code or API standard. I have experience in inspection pipelines, vessels, steel structure and boilers and have good experience in working at oil and gas sectors and can prepare the inspection and qualification reports. evaluation of destructive testing reports for materials and materials corrosion with vast experience in interpretation of radiographic films and make inspection by using ULTRA SONIC test with shear wave and make MT by using fluorescent test and non – fluorescent test by YOKE or another processing., using DYE PENTRANT TEST to evaluate the surfaces defects of welding, and make calibration of UT and MT, and making PREHEAT and PWHT procedure for weldment. QA/QC Field Engineer, have inspection experience in piping including review of ITP/ WPS/ PQR/ WPQ/ MTR/ weld map etc, piping spools fitups inspection, material traceability records maintenances, joint nos. weld nos. records, piping spools isometric nos./ spool nos. identification, installation, review of RT films and other NDT reports, monitoring rejection rate and welders performance, review of PWHT reports and charts, punch listing, review of test packages for welding and NDT completion, issue release for hydro static test and witness of the same, review calibration records of pressure gauges, reinstatement of piping after hydro static test, monitor internal cleaning, fitting up of new gaskets, boltings and its tightness, review of final QC documents etc.

WORK EXPERIENCE:

Mega-Electra S.A.Lugano CH /SWISS

I was working with this QC engineer at AL ZAWYIA REFINERY to make repairing and maintenance for heavy oil tank such as floating roof and gates and pipelines after welding, checking all weldment by RT, UT, MT and DPT and make welders qualification, WPS, PQR.

SOCOMENIN COMPANY

TUNISIAN COMPANY

FROM 12/11/1997 TO 4 / 9 / 2001

(Engineering, industrial, construction & maintenance –AV MED KHEFCHA 3000 SFAX

– TUNIS

I was working as welding and NDT inspection engineer in DERNA POWER

STATION to make maintenance and repair boilers and made retubing for

Boilers and installation of demineralization plant (STAINLESS STEEL

GRADE 316 L ) with DEGREEMONT COMPANY and at TRIPOLI

POWER STATION, TUBRIK POWER STAION with

BABCOCK COMPANY and in RAS LANUF OIL AND GAS

PROCESSING COMPANY and choose all specifications of heavy oil fuel tank project ( 40-Q-32 ) and made the bill of material in accordance with international standards such as ASME, API, AWS, NACE 0175, BS

supervised all welding and inspection activities at these projects, and working as welding and NDT inspection engineer in AL BURI

OILFIELD ( ENI OIL COMPANY ).

MEDITERRANEA PROGETTI

SICES GROUP (LONATE C (VA) ITALY

From 25/7/2004 to 1/10/2005

TRIPOLI PHONE - 00218214836050 / LIBYA

(MELLITAH PLANT IN WESTERN LIBYA GAS PROJECT)

( ENI GAS ) (LPG PLANT )

ALSARIR OIL FIELD (ARABIAN GULF OIL COMPANY)

I was working with MEDITERRANEA PROGETTI COMPANY AS

Mechanical supervisor to execute the welding and inspection of NDT in

WESTERN LIBYA GAS PROJECT with SNAMPROGETTI ( ENI

GAS ) and installation pastillation unit and sulpher warehouse in Mellitah plant (LPG ). and working with desludging desalters project

(heating system ) in ALSARIR OIL FIELD (ARABIAN GULF OIL

COMPANY) for processing and desludging the crude oil from sludge.

and made site survey for low pressure project in ABOU TEFFEL FIELD

( ENI OIL COMPANY )

AL NAHR LIMITED COMPANY FOR pipe manufacturing and construction

15/10/2005 up to now

Iam working with engineering department to supervise all welding and inspection

Activities for water supply project (phase III) and qualification of welders and pipelines

Laying (DIA 4000 mm) and checking and evaluation of NDT inspection by using UT

Procedure. Evaluation of welders qualification

SKILLS:

MICROSOFT WORD, EXCEL, AUTOCAD 2007.

LANGUAGE:

ARABIC, ENGLISH AND SIMPLE ITALIAN

EDUCATION:

University of Baghdad
College of engineering
Mechanical department
1983 -1988

TARGET JOB:

EMPLOYEE

JOB STATUS: FULL TIME

JOB LOCATION: ANY

CATEGORY: WELDING AND NDT INSPECTION OF PETROCHEMICAL

PLANTS, OIL FIELD SERVICES, WATER SUPPLY SYSTEMS and VESSELS.

ORGANIZATIONS:

AMERICA SOCIETY FOR NON-DESTRUCTIVE TESTING (ASNT)

AMERICAN WELDING SOCIETY (AWS)

IRAQ UNION ENGINEERS.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 6396)

Go to Search Parameters...

Brief Description

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

20 years experience in major integrated national oil company of India. Experience in production operations, process development, enhnaced oil recovery projects and research work related various operations of the company.

Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

Process engineering.

Mechanical Engineer

Working as Lead maintenance Technician in Oman polypropylene LLC, is a subsidiary of Oman Oil Company, Sohar, Oman. Involved in SAT (site acceptance test) in DCS, ESD system, FSC system, F&G system, Radio system, Metering station, Field instruments and DG set.

I have over 10 years experience in chemical and process engineering, with an additional 5 years experience supervising construction in the petrochemical industry. I am well versed in the areas of chemical plant design and construction as well as document issues in conjunction with detail design

13 years exp in epc projects

A comprehensive background in Oil & Gas, Structural Fabrication & Welding Techniques coupled with the duties of an Inspector / Quality controller / Supervisor since 1993. Able to motivate & co-ordinate other personnel into achieving quality accepted targets& liaise with clients & their representati

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Master degree in Welding.Inspection engineer experienced in Oil abnd Gas industry

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

Reservoir Engineer with proven record of accomplishments. Extensive experience in pressure analysis, property evaluation, reserves determination, operations, and computer modelling with a skill for enhancing company value. Proven ability to find additional reserves where others have already looked.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Geoscientist with over 20 years experience with major oil companies in Europe and South America in exploration, production and business development projects.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

20 years of experience in the field of computer s/w and h/w

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

. I have sixteen years refinery experience for four location – Texaco Port Arthur, Basis petroleum Krotz Springs - Louisiana, Basis petroleum Houston – Texas and Basis petroleum Texas City refinery. Basis petroleum has been acquired by Valero in 1997.

Supervise small and mid-sized projects involving maintenance/rehabilitation/repair of pipelines and piping systems, good experience at piping equipment selection and sizing, experience with pigging facilities design, experience at pipeline pigging, fluent in English, French and Arabic

INSTRUMENTATION ENGINEER

I&C ENGINEER. ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING

Technical / Lead Safety Engineer

NDT inspector LVL II

M.E in Instrumentation Engineering with 16 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning .

Free! Lead/Senior Piping Designer

Sr. PDS Piping Designers / Design Piping Engineer

Senior Offshore Structural Engineer

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

Piping Field Engineer – Technical Office

14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL

PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE

I'm a geophysicit who is updated with latest technology, in-depth experience in geophysics as well as geology. Skills include seismic interpretation (on the regional, prospect and reservoir scales), prospect generation, well proposals, conventional and advanced seismic interpretation. Software skill

Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills

19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.

I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.

Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production

Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out