Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #5361 next resume »»
CONTACT INFORMATION:
View contact information...

CURRICULUM VITAE

MARITAL STATUS: Married
NATIONALITY: Romanian
SEX: Male
RELIGION: Christian Orthodox
DATE OF BIRTH: November, 20th, 1956
PLACE OF BIRTH: Ploiesti

EDUCATION AND TRAINING

2000: Authorization for working in power distribution plant, Low and Medium Voltage Unlimited Power – IIIrd Level authorized by "ELECTRICA S.A." (The Romanian National Company for Electricity)

1999: Training Course for Instrumentation at PROGECO SISTEMI GROUP in Rosignano – Italy (using AutoCAD 14) according ITN
(Internal Standard of NUOVO PIGNONE - FIRENZE)
1996: Training Course for operating AutoCAD R12

1982: Serve in the Romanian Army

1975 – 1980: Polytechnic Institute Bucharest
Electrical Engineering Faculty

1971 – 1975:,, I.L.Caragiale "- College, Ploiesti

PROFESSIONAL EXPERIENCE

September 2003
April 2004

Veco Engineering Abu Dhabi, UAE branch of Veco Engineering Calgary, Canada
Position: Electrical Design Engineer
Engineering Design of Electrical Systems (Low Voltage and High Voltage).
Work included preparation of Conceptual and Basic Design for the provisions of the upstream facilities required for the development of the Melut Oil Field located in Southern Sudan.
The scope of the electrical activities within FEED was to provide:
- SLD's (Single line diagrams) for 0.4 kV Switchgear, 6.6kV Switchgear, AC UPS, DC UPS, Oil Wellhead, OGM, FPFs and CPF
- Electrical standard installation details
- Control Schematic diagrams
- Specifications for LV Switchgear, MV Swichgear, AC and DC UPS, Power and Distribution Transformers, LV and MV Cables, Electrical Heat Tracing, LV and MV Motors, Diesel Generators and Power Solar Systems
- Data sheets for LV Switchgear, MV Swichgear, AC and DC UPS, Power and Distribution Transformers, 33kV Ring Main Units, LV and MV Cables,
- Load schedules and feeder lists
- Equipment lists
- Hazardous Area Classification for Wellheads, OGMs, FPFs and CPF
- Cable schedules
- Cabling system
- Voltage drop and cable sizing
- Earthing and Lighting calculations
- Earthing layout for Wellheads, OGMs, FPFs and CPF
- Lighting layout for Wellheads, OGMs, FPFs and CPF
- Cable layout for Wellheads, OGMs, FPFs and CPF
- Lightning calculations
- Indoor and Outdoor lighting
- Emergency lighting
- UPSs sizing (110V DC UPS)
- Electrostatical protection study report
- Substation layout (Substation and transformer yard sizing)
- Transformer sizing (33kV/6.6 kV, 11kV/6.6 kV, 6.6kV/0.4kV)
- MTO's (Materials Take Off)
- MR' s (Material Requisitions)
for the relevant Wellheads, Oil Gathering Manifolds, Field Surface Facilities (at Adar and Palouge), AdarPipeline, Field Production Facilities (at Adar/Agordeed FPF and Palouge FPF) and Central Processing Facility ( at Al Jabalyn) within Melut Oil Basin, Sudan.

May 2002 –
August 2003

ABB s.r.l.- Romanian branch of ABB Automation Systems GmbH, Pipelines and Terminals, Mannheim - Germany
Position: Field Supervisor, Construction and Pre-Commissionning Group involved in Romanian National Crude Oil Transport System Rehabilitation - SCADA Project within CONPET s.a.
Responsible to carry out on site for:
- cable routing, supporting, clipping, glanding and termination of all the instrumentation cables in field and in Control Room;
- installation and connection of all the field instruments
(manifactured by ABB, SAAB, VEGA), junction boxes and
ROTORK valves actuators;
- testing of the installed cables ( KERPEN ) and instruments (ABB);
- installation and connection of ABB cabinets (ACS, RTU,
Marshalling, Flow Computer cabinet) in Dispatcher Room
- connections between ABB cabinets, Pump Monitoring Cabinet
(in Dispatcher Room) and MCCs (in Electrical Room)
- earthing and screening of all the instrumentation cables, field instruments, JBs, ABB cabinets and SCADA computer
- As built drawings

September 2001 –
April 2002

ABB LUMMUS GLOBAL s.r.o.- Brno, Czech Republic
Position: Electrical Design Engineer.
Performing design works by usage of AutoCAD 2000 and PDMS for:
C4 Olefins Complex Project within Sabina Petrochemicals LLC, Port Arthur, Texas – USA, composed of Shell, BASF and Fina.
Within this project I performed, according NEC-1999:
- electrical cables (OKONITE) routing from electrical substation to Ingersoll Rand electrical equipment (air compressors, heaters fans and s.o.)
- electrical motor schematic for ABB motors (100HP, 200HP)
- electrical cable routing from lighting panels to lihgting fixtures
- instrumentation cable routing from JBs to field instruments

February 2000 –
September 2001
S.C. T.I.A.B - S.A. (Installation and Automation Bucharest Trust - Ploiesti Branch) – a company specialized in the field of mounting for electric, automation, heating, ventilation and air conditioning installations.
Position: Electrical Design Engineer.
Performing design works by usage of AutoCAD 2000, as follows:
- the low voltage electrical installation for the hydrogen plant within "ASTRA" Refinery – Ploiesti;
- the low voltage electrical installation for the bitumen plant within "Rompetrol-VEGA" Refinery, Ploiesti
- the low voltage electrical installation for MIDIA LPG Storage within S.C. MARI GAS s.r.l.. - Constanta
- the low voltage electrical installation for SC PETROTEL - LUK OIL s.a. - Refinery, Ploiesti;
- the emergency lighting and emergency power supply within
" ASTRA STADIUM " – Ploiesti
In all the above mentioned projects there were used electrical equipments manufactured by Schneider Electric, Legrand, Moeller Siemens and ABB.
Position: Electrical engineer - Field Supervisor
Involved at the commissioning of the electrical installation at the MARRIOT GRAND HOTEL Bucharest (together with the Austrian company ALSTOM Contracting GmbH, as Subcontractor ).
I supervised the activity of 60 electricians involved in:
- low voltage cables pulling and installation for exterior lighting and interior lighting (hotel rooms, meeting rooms, restaurants, bars, laundries, casino, shopping area and s.o.)
- connecting for all the electrical loads belonging to all the above mentioned hotel areas

June 1999 - February 2000
PROGECO SISTEMI GROUP ( Italian Design Company )

TUGA (Gas Turbines) Instrumentation Department,
Position: Instrumentation Design Engineer
Concerned with design of the instrumentation equipment afferent to the turbine gas produced in ITALY at "NUOVO PIGNONE" – Firenze, using AutoCAD 14.
Within Progeco Sistemi projects, performing according ITN:
- the positioning of the JBs on turbine gas frame
- instrumentation cable routing from JBs to instruments
- wiring diagram for JBs
- electrical cables routing from JBs situated on gas turbine, to the lighting fixtures

September 1998 -
June 1999:

S.C. IPIP - PETROCONSULT GROUP S.A. Ploiesti (Romanian Engineering & Design Institute for Refineries and Petrochemistry),
Electrical and Instrumentation Department
Position: Electrical Design Engineer.
Elaborating design projects for electric equipment such as:
- electric drive for the paraffin press using frequency converters, within "STEAUA ROMANA'' Refinery – Campina;
- low voltage electrical installation for Fagaras filling station belonging to PETROM;
- provide technical assistance and site survey activities for the pumping units from various locations in order to elaborate the lay-out plans for the instrumentation cables;
- instrumentation cables routings for the Romanian Crude Oil Transport System collaborating with German specialists from ABB Automation Systems GmbH, Pipelines and Terminals, Mannheim – Germany.
- feasibility study for the electric installation afferent to the wasted waters epuration plant within " VEGA" refinery.
In all the above mentioned projects there were used electrical equipments manufactured by Schneider Electric, Legrand and Moeller.

January 1991 –
August 1998:
S.C. UPETROM – 1 MAI S.A. Ploiesti ( Oil Equipment Works ).
Mechanical & Electrical Department,
Position: Head of the electric workshop.
Supervising the activity of 200 workers.
Responsible for the following activities:
- the commissioning of the electrical equipment for a steel plant
- the mounting of mobile campus designed for Turkmenistan Republic ;
- the mounting and testing of four mobile drilling equipment designed for Belarus Republic;
- the general overhauls for the electrical equipment of the drilling rigs belonging to PETROM ;
- the preventive planned repairs of the electrical for machine tools, electrical cranes, electrical resistance furnaces all over the Prahova County ;
- the manufacturing of 500 electric switchboards for the pumping units exported in Russia.

August 1980 -
January 1991
S.C. UPETROM – 1 MAI S.A. Ploiesti ( Oil Equipment Works ), Electrical Department,
Position: Electrical Engineer.
In charge of repairing and maintenance for electric installations – power and lighting systems, executing various electric switchboards.
Responsibilities included overhauling of the electric part of machine tools and of thermal equipment such as heaters for thermal treatment, also performing overhauling operations for rolling bridges.
Familiar with the electric part afferent to following equipment:
- drilling rigs destined to export in various countries
(Russia, China, India)
- metallurgical equipment ;
- CATERPILLAR Diesel engines relevant to the cementing equipment;
- pumping units
- thermochemical treatment units.

SPECIAL SKILLS

- P.C. working experience with Windows 2000, Autocad 2000
PDMS, Microsot Office 2000 (Word, Excel) ;
- driving license from 1976 ;
- fluently speaking in English ;
- good level French, German and Italian language ;
- easy to join in a design team, maintenance service team or promotion team ;
HOBBIES
- traveling
- music

View contact information...
«« previous resume next resume »»
Search Results (Resumes 701 to 750 of 6541)Go to Search Parameters...
Brief Description
DCS Lead Engineer
Experienced Geophysicist
10 years in Geophysicist
B.Tech (Chemical) with 13 years 10 months experience
Having 13 years of exprience in maintenance construction and design field of all types of instruments in oil and gas industry.preference given for offshore / on shore ON/OFF duty jobs.
Instrumentation engineer B.E (Electronics) with experience in Engineering /Design in the field of instrumentation. My experience in the sector of EPCM’s and E&P includes the supervision of different Oil and gas Projects in the upstream and downstream sector, incl: insta; Erection and commissioning
Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.
I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing
Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.
Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.
14 year experience in detail engineering of static equiment like pressure vessel, columns, heat exchangers and packages
Looking forward to join an Organization where I can pursue a Successful career by utilizing my skills and abilities to the maximum extent with full potential.
Petroleum Economist
As you will see from my CV & With my proven ability & experience to develop various studies, reports, calculation and design of instrumentation & control system and maintain the highest quality standards whilst also minimising costs.
Over 12 years of Piping detailed engineering experience in PDS-3D working Environment, exposure of SmartPlant Review, PDS-Piping Coordination, drafting tools AutoCAD/MicroStation, Piping stress analysis (static) by Caesar II, Piping material procurement and excellent skill in MS Office applications.
Hands on experience on High Pressure Mobile Hydraulic Systems (Closed Loop & Open Loop Systems), which includes Variable & Fixed Displacement Hydraulic Pumps & Motors, Various types of Hydraulic Valves, Proportional Valves, and Electro Hydraulic Actuators, Hydraulic Cylinders.
Lead offshore structural engineer
Electrical Engineer with wide experience of erection, commissioning, troubleshooting and maintenance
Experienced Professional Mechanical Engineer with 15 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills.
Piping DEsign Engineer with 13 years of experience in the field of refinery, petrochemicals, fertilizers. Experience in layouts, materials, stress analysis. Presently working with KNPC, Shuaiba Refinery, Kuwait
Technical Professional with over 20 years global experience in Petroleum Engineering, Intervention Services, Project management, On-site Supervision, Proposal and Report preparation, Contract preparation and Administration.
A hardworking and highly competent Electrical Engineer
A petroleum geologist proficient in interpreting and integrating well logs, core analysis data, petrology, 2D and 3D seismic, well test and production data to develop prospects and drilling opportunities leading to the economic production of hydrocarbon.
QA design and Quality Control including conduct of coordination and various inspection activities on mechanical packages in UK, Europe, USA, Middle East and Far East. Computer system / procurement activities.
My objective is to start a new career in Indonesia that would allow me to expand on my twelve years of sales, marketing and contract experience in the service sector for the Indonesian Oil, Gas and Geothermal business after retiring from Schlumberger.
Charted Engineering marien & mechanical engineering with PHD in Engineering management,20 Years experience as senior corrosion engineer in mining and petroleum industries. With 15 years in engineering management. Specialist engineer coating and Cp design.
I am a Project Manager/Mechanical Engineer with 33 years experience in both, International & local projects.
2003-2004 Veco Engineering Abu Dhabi 2002-2003 ABB s.r.l. Romania 2001-2002 ABB s.r.o. Czech Republic 2000-2001 T.I.A.b , Romania 1999-2000 Progeco Sistemi Group, Italia 1998-1999 I.P.I.P. , Romania 1980-1998 Upetrom S.A. Romania
Directing and maintaining the QHS&E efforts of the Region, to conform to Company policy, regulatory, and customer’s requirements. Developing Region policies, procedures, and related documentation. Interact with client HSE departments to ensure understanding of HSE Systems.
Ist class Chemical Engineer with vast experience in operation , Project Management , Engineering Management , Commissioning Management in Fertilizer , Petrochemical and refinery field.
Mechanic Engineer
A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.
DCS system engineering design, configuration, installation & commissioning.
Take up Senior Corporate Management Level challenging position with multi-million Heavy industries
Develop and evaluate fire hazard analysis,various types of fire protection/detection and suppression systems, scope development, review of deliverables, identify user interface requirements and project coordination
Polyester, Nylon,extrusion,plant management, manufacturing, sales
Experienced, proficient and highly qualified Senior QA Engineer/Manager, able to provide 30 years of QA and QC experience in a wide range of disciplines within the oil and gas sector. Would consider a long term posting (if possible) in the UAE, Malaysia, Thailand, Singapore, Japan or Vietnam.
Dear Sir, I am looking for a job.Thanks for your email,
Over 30 years in oil and gas pipeline inspection. Welding and NDE CSWIP 3.2 CSWIP RT UT MT + ATTO
Petroleum engineer with 28 years experience. Primarily field exploitation but includes drilling, production, reservoir and facilities. Overseas for 14 years working on properties in Pakistan, Indonesia and New Zealand. Able to work under conditions with little support staff or management supervision
I have a Bachelors degree in Chemical Eng with over 20 years experience in Safety, Chemical Plant Operations and Process Engineering in multi national chemical companies like EXXON, Ciba-Geigy, & Shell. Presently working as Senior Process Safety Engineer with a leading company in Saudi Arabia
M. Tech (Electrical Engineering) Over 17 years experience in Design, construction and commissioning in Oil & Gas, Petrochemilcal and Power plant
32+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications
Drilling Engineer . I worked as a well site-drilling engineer, drilling supervisor, operations drilling engineer, drilling superintendent and promoted to drilling engineer specialist, after receiving PhD in Operations Management
Mechanical Engineer (degree) having over 24 years experience in Planning and Maintenance in large petrochemicals, oil/gas facilities. Specialized in Maintenance Planning and CMMS (Maximo).
I am a qualified Electrical engineer with a vast exposure of more than 21 years in the field of Detailed Engineering ,Operation /Maintenance,Erection/commissioning,Testing etc in search of a suitable job in UAE,Qatar,Oman
Sr. Piping/Hvac Designer with over 25 years of experience with a solid 3D modeling experience mainly in AutoCad. Currently studying Cadworx at home using a tutorial from Cadworx.
Mechanical/Petroleum Engineer with 20+ years of experience in artificial lift applications encompassing ESP and PCP (mainly Progressive Cavity Pumps). Development of programs to select PC Pumps and automation/controlling of PC Pump Systems based on surface data such as axial load and/or torque.
Principal Process/Facilities Engineer and Project Engineer/Manager Bachelor's Degree Chemical Engineering University of Oklahoma 1976 and MBA Studies Registered Professional Engineer American Institute of Chemical Engineers Gas Processors Association
Control, Safety Systems and Instrumentation Design / Maintenance / Operations Engineer
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   [ 15 ]   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com