Resume - Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise...

Misco Jobs

Resume #53707

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
- Conduct chemical usage and storage audits to help avoid waste
- Source and engineer chemicals to meet specific field requirements
- Track and report chemical use against performance targets
- Participate in solving field problems, especially MIC problems
- Conduct safety, system integrity and environmental risk assessments

OBJECTIVE:
------------
Looking forward to occupy post of production chemist/corrosion specialest

WORK EXPERIENCE:
------------
WORK EXPERIENCE (SUMMARY)

I- Previous Job Responsibilities – General Co. For Batteriers.
Quality Control Chemist
- Follow up the different manufacturing stages of MnO2, which used in dry Batteries.
- Supervise workers and analyze sample(s).

II- Job Responsibilities - GUPCO.

2.1. Senior Chemist – from 1988 to 1992
2.1.1. Administrative Work
* All the required administration work of preparing and issuing memoranda, Correspondence, filing... etc
2.1.2. PC Computer Work
* Aware of various computer software MS DOS, PC tools, PW…etc.
2.1.3. Monitoring
* Quality of injection water produced out of the waterflood process plants.
* Quality of drinking water produced out potable water processing station (watermaker)
* Corrosion rate throughout injection water network
* Bacterial activity throughout injection water network
* Scaling tendency of the different kinds of connate water
* Compatibility of injection water with the different kinds of connate water.
* Residual Organic phosphonate (scale inhibitors) in different kinds of connate water.
2.1.4. Quality Control
* Processing of crude oil throughout process plant facilities
* Processing of Potable water throughout watermaker plant facilities
* Processing of injection water throughout the waterflood process plants
* Lubricating oils used for gas turbines and compressors
2.1.5. Especial Assignment
* Prepare material requests for Chemicals, consumables, and instruments spare parts.
* Simplify standard testing procedures that used in the different analyses and translate into Arabic.
* Evaluating the different kinds of chemicals that are injected in the process plant facilities, injection water processing plants, and O/P that are:
(Demulsifiers, Scale Inhibitors, Corrosion Inhibitors, Biocides, Oxygen Scavengers... etc)
* Operation and calibration of precision instruments like spectrophotometers, dissolved oxygen analyzers, pH meters, conductivity and turbidity meters, titroprocessor, ICP-
AES...etc.
* Maintain high level of safety measures while dealing with hazardous materials.
* Prepare and held Div. monthly safety meetings.

2.2. Section Head/Chemical Evaluation and Research Dept. – from 1992 to 1995

* Make sure that HSE regulation and instruction are strictly applied and provide convenient PPE for all workers and ensure that all subordinates are acquainted with the division emergency plan.
* Aware of various computer software (Windows and MS Office)
* Analyze and recommend evaluation for subordinate performance.
* Ensure that the PM schedule of Labs instruments is going.
* Coordinate with other departments within the Div. to achieve high QC and monitoring system.
* Gathering the analyses data, analyzing them, and using them in participation with the others to solve the field problems and predicting problems to prevent occurrence
* Periodic review of Dept. stocks of chemicals, consumables, and instruments spare parts.
* Participates in monitoring the effectiveness of chemical activities in optimizing production operations and ensure that the quality of chemical used to meet the required standards.
* Follow up the performance of Ras Shukheir firefighting loop.
* Preparing training modules in safety, corrosion and chemistry to be presented.

2.3. Dept. Head/Chemical Evaluation and Research Dept. – from 1995 to 2005

* Familiar/ Maintain proper and continuous knowledge of Gupco's HSE procedures, rules and regulations and abide by them at all times.
* Follow up staff behaviors to ensure that they strictly adhere to HSE instructions to have Zero record of accidents, fires and injuries.
* Plans and direct the activities of Dept. staff.
* Recommend convenient training programs for Dept. staff.
* Develops, motivates and appraise Dept. staff.
* Ensure the precision of different analysis and monitoring system conditions.
* Participates in establishing the Div's plan for progress, updating the techniques, and
Upgrading the instruments
* Participates in selection of chemicals for both corrosion control and crude oil/water injection.
* Provide advice on chemicals & protection measures, to ensure the optimum treatment of potential and existing corrosion.
* Participates in inspection of Gupco's R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems.
* Participates in the bid selection process "technically" to ensure regular and corrective anticorrosion maintenance.
* Follow up the preparation of the Division Budget (Opex/Capex).
* Member of the process plant integrity and operation team (Process optimization team).
* Conveys and supervises the application of the Company's policy to Dept. staff.
* Recommend the Div. Budget (Opex/Capex)

2.4. Current Job Responsibilities (Labs Assistant General Manager)
* Comply with HSE policy, improve safety culture and performance to achieve accident free workplace.
* Organize/follow up Div. activities to ensure analytical service at satisfactory level of accuracy that meets requirements of Operation Dept.
* Plans for current and prospective developments with Div. staff for implementing new analytical methods making use of technology advance.
* Recommend pertinent training for staff within budget guidelines.
* Prepare the recommendations for Div. budget and control operating expense.
* Annually appraise Div. staff according to Gupco's rules.

Summary of Training Courses
1. Local Training:
Permanently invited to attend the annual symposium of corrosion problems in industry sponsored by the Egyptian Corrosion Society as well as the annual water treatment technology conference sponsored by Abu Qir Fertilizers Co.
1.1. Introduction + DOS Computer Program at IBM, Cairo (Sep. 1989)
1.2. Chemical and Biological Basics for treating drinking Water at NRC, Cairo (Jan. 90)
1.3. English Language Course (E-4 Level) at Defense Language Institute, Cairo (Mar. 90)
1.4. Fluid Sampling at Ras Shukheir Training Center (Sep. 90)
1.5. Corrosion and Water Treating Course, Cairo (June 91)
1.6. English Language Course (I-1 Level) at Defense Language Institute, Cairo (Oct. 91)
1.7. PC-tools Computer Program (Jan. 93)
1.8. Windows Computer Program (Jan. 94)
1.9. Technical Report Writing at the Management and Development Center, Cairo (Oct. 94)
1.10. Industrial Water Treatment, Cairo (Mar. 95)
1.11. Excel Computer Program (Jun. 95)
1.12. Powerpoint Computer Program (Apr. 96)
1.13. Microbial Corrosion at NRC, Cairo (Jan. 97)
1.14. Plasma Emission Spectroscopy Course at NRC, Cairo (Jan. 97)
1.15. Windows 95 Computer Program (May 98)
1.16. Managing Safety Human Performance (May 99)
1.17. Principle skills for leaders and managers (March 01)
1.18. Advanced safety auditing (May 01)
1.19. STOP observation safety program (Oct 02)
1.20. HSE committee members, National Safety Institute, Cairo (Apr. 03)
1.21. Incident/Accident investigation training course, in-house, (Dec. 2005)
All HSE basic training courses where received (ASA, STOP observation, PTW, Fire fighting,First Aid, H2S hazards, Waste Managemnet…etc

2. ABROAD TRAINING:
2.1. Corrosion and Water Treatment Course (Oct. 1996)
Sponsor: Petrolite Chemical Co., Kirkby, Liverpool, UK

2.2. Materials, Corrosion, and Inspection Symposium (Oct. 1996)
Sponsor: Amoco Oil Co., Houston, USA

2.3. Microbiologically Influenced Corrosion Course (Oct. 1996)
Sponsor: Amoco Oil Co., Houston, USA

------------

EDUCATION & CERTIFICATION:
------------
- I have a BS degree in Chemistry from Ain-Shams College (1985) with a major grade (very good)
- I have also completed a master studies (MS degree) in microbial corrosion. The Thesis Title is "Characterization of Microbiologically Induced Corrosion (MIC) in Oilfield Pipelines".
- Currently, I'm a Ph.D. candidate. The research subject is " Studies on the Corrosion Inhibition of mild steel in aqueous solutions" ------------

ADDITIONAL INFORMATION:
------------
Nationality: Egyptian
Religion: Moslem
Date of Birth: April 21st, 1963
Passport No.: 9316
Marital Status: Married
No. of Children: Two (2) + baby expected by March 2007
Military Service: Completed by the end of 1986
Professional membership: Member of the Egyptian Corrosion Society (ECS)

My Publications:
1. El-Raghy, S. M., Ateya, B. G., Bayoumie, R. S., and Mahmoud, M. N., " Microbial Activities And the Electrochemistry of Microbiologically Influenced Corrosion (MIC) In Chloride Solutions," Proceedings of the 6th Int. Conf. On Mining, Petroleum and Metallurgy, Fac. Of Eng., Cairo Univ., Vol. 3, P. 287-289, 20-24 Feb., 1999.
2. Ateya, B. G., El-Raghy, S. M., Bayoumie, R. S., Abdelsamie, M. E., and Mahmoud, M. N.,
"Effects of Some biocides and Corrosion Inhibitors on Stabilized Mixed Culture Containing Sulphate Reducing Bacteria (SMC-SRB)," Proceedings of the 18th Ann. Conf. On Corrosion Problems In Industry, Egyptian Corrosion Society (ECS), Ismailia, Egypt, 23-25 Nov., 1999.
3. Bayoumie, R. S. and Abdelmagied, M. I., "Monitoring Injection Water Quality at Gulf of Suez," Proceedings of the 19th Ann. Conf. On Corrosion Problems In Industry, Egyptian Corrosion Society (ECS), Zaffarana, Egypt, 21-23 Nov., 2000.
4. M. A. Amin, S. S. Abd El-Rehim, E.E.F.El-Sherbini, Rady S. Bayoumi, "The inhibition of low carbon steel corrosion in hydrochloric acid solutions by succinic acid – Part I. Weight loss, polarization, EIS, PZC, EDX and SEM studies," Electrochimica Acta xxx (2006) xxx-xxx (the Corrected proof received and the paper will appear sooner in the journal).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 6636)

Go to Search Parameters...

Brief Description

PROJECT, INSTALLATION, COMMISSIONING, MAINTENANCE OF INSTRUMENTATION AND CONTROL SYSTEM

Drilling Fluids Program Supervisor/Well Site Supervisor

Over 21 years of management and hands on experience in a field of Procurement, Fabrication, Installation, Commissioning start up, Operation and maintenance activities. Related to Oil & Gas marine, On & offshore structure, Ship repair and EPC fabrication work, Petrochemical, Utility plant.

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Senior Chemist Supervising the sampling/testing Petroleum Refinery product streams and finished products and issuing Certificates of quality (COQ) for the products

IAM A QUALIFIED CORROSION ENGINEER AND IHAVE BEEN WORKING WITH WAHA OIL COMPANY SINCE JANUARY 1984, THEN WITH GECOL COMPANYTILL DATE,LAST TWO POSISION HELD , I- CORROSION SECTION SUPERVISOR (GIALO FIELD) 2- COORDINATOR OF HIGH COMMITTEE IN PROJECT DEPARTMENT.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

19 Years as “Instrumentation & Controls Engineer- PMT/ EPC Roles in Oil& Gas, Petrochemicals”.

Reservoir engineer / software engineer. 11 years reservoir engineering; 8 years software engineering in other industries. Keywords: reservoir modeling; simulation; upscaling; production forecasting; reserves estimation; well test analysis; Eclipse; VIP. Availability: immediate.

Senior Civil/Structural in Oil/Gas Field

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

I am a senior electrical engineer and project engineer with over 30 years experience largely gained within the Petro-Chemical, Liquid Natural Gas (LNG) and Power industries. Experienced in UK and overseas operations both on and offshore, Start-up, resident and project based engineering roles. A good

pipeline inspection and tyhird party inspection

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

B.sc in petroleum engineering from tulsa university ,oklahoma,U.S.A.,1985. work experience 23 years

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Geologist geophysicist interpretation

Civil Engineering from University of Indonesia (1989), 3 Years experience in engineering consultant company, 13 years in contractor company as project and HSE coordinator at various project (1991 - 2004), 2 Years as Supervisor at Petrochemical project, and 2 years as HSE coord at pipeline project.

Graduate with an Engineering degree having 20+years experience

HSE Engineer/ Senior HSE Engineer/ Deputy HSE Manager/ Permit to work co-ordinator/ Authorized Gas tester/ HSE Trainer/ Sea Survival holder/

Graduated in Mechanical Engineering. Have more than 20 years of Oil field experience. Domain: Drilling Engineering.

Petroleum Measurement Specialist Liquid and Natural Gas. Chemist and Lab Manager in LPG and Natural Gas. Measurement Supervisor for large pipeline company. Interested in challenging position in Measurement Field.

Mud Engineer

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

Geophysicist with more than 15 years international experience in geophysics for major oil and gas companies.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

I am a Process Commissioning Engineer having more than 18 years experience in pre-commissioning, commissioning, startup, operations, trouble shooting, performance testing and hand over of oil and gas facilities, refineries, gas to liquid plant and fertilizer plants. I have hands on experience in the

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,

process engineer

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC

Marine engineer, 1st Class Certificate and Offshore experience.

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

Project engineering as well as civil structural design experience in the oil and gas, industry and civil works design, project management and construction environment

I have 22 years of extensive experience from different Petrochemical plants, Oil & Gas , Power plants.

20 years combined working experience in Project Engineering, Construction, Design, Installation and power hook-up activity, Test and Commissioning of Electrical and Instrumentation Equipment including the Preventive and Corrective Maintenance

Telecom Contractor ,english speaking ,Bell System Trained, college degree in Telecommunications ,20 years plus Outside Plant Technician and AVAYA ACS PBX's seeks contract/fulltime work in Middle East or almost anywhere in the world.

Having strong Process and Operations background, diversified knowledge and experience of Oil Industry for approx. 25 years in Process Engineering, Operation, Projects initiation, Coordination and commissioning, Product and Market Development, Pricing, Techno-Economic evaluation, Client / Customer

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

Experienced with trouble shooting all aspects ships electrical installation and automation, DP Experience

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

painting and insulation supervisor - oil and gas industries

35+ years of multi-disiplined engineering practice, 24 years of direct supervisory experience, in power, petroleum & process industries

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out