Resume - Oil/Gas Rotating Equipment / Marine Engineer

Misco Jobs

Resume #53892

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION
Date of Birth: 10-07-1980
Nationality: Indian
Languages Known: English, Hindi, Gujarati, Korean
FIELD OF EXPERIENCE (Rotary & Static Equipment Engineer)
* Detail and construction engineering for offshore oil and gas platforms and Ship carriers.
Preparation of PS, Vendor technical meetings, Technical Evaluation, Vendor data review,
Material Handling Study, Installation drawings, Construction & Installation supervision,
Change work, Preparation of ACI, HAZOP, Relief valve sizing, Equipment sizing calculations, Pump head verifications. Follow-up of commissioning activities.
EMPLOYMENT DETAILS
(1) Prosafe Production Pte. Ltd. – Singapore, January 2007 – Till date
* Designation: Process / Mechanical Engineer
* Prosafe is the global market leader in the provision of semi-submersible accommodation and service rigs. Prosafe is also a major owner and operator of FPSOs and FSOs. They offer turnkey delivery of FPSOs and FSOs, including the engineering of in-house technology, project management, operations and maintenance.
(2) Daewoo Shipbuilding & Marine Engineering Co. Ltd. (DSME) – South Korea, February
2003 – January 2007
* Designation: Process / Mechanical Engineer
* Daewoo Shipbuilding and Marine Engineering Co. Ltd. (DSME) South Korea is an EPC
Company involved in detail engineering and construction of the offshore platforms,
Commercial and Special Ships. DSME has done several offshore platform projects of oil giants like Exxon-Mobil, BP, Chevron and Shell.
PROFESSIONAL EXPERIENCE
(1) APACHE'S THEO VAN GOGH FPSO January 2007 – Till date
* Water depth – 350 meters. Classification – LR
* Operation Area: N.W Australia
ROLE:
* Working as a Process / Mechanical engineer for topside process equipments as well as marine equipments.
RESPONSIBILITES:
* Preparation of RFQ packages for topside process equipments like API Centrifugal pumps,
API Reciprocating pumps.
2/5
* Preparation of RFQ packages for marine equipments like thruster, air compressor and dryers, centrifugal pumps.
* Issue of RFQ to vendors and expediting the vendors for submission of budgetary quotes.
* Budgetary quote review and vendor technical meeting for Produced water treatment module, Crude stabilization module, Gas De-hydration module, thruster, air compressordryer, fresh water generator, centrifugal pumps etc.
(2) ODFJELL GVA 7500 DP/MOORED RIG December 2005 – January 2007
* Water depth – 10,000 ft. Classification – DNV
* Operation Area: North sea
ROLE:
* Working as a Process engineer and Lead Marine Engineer for rotary and static equipments for basic design stage.
RESPONSIBILITES:
* Preparation of PFDs for marine and utility system.
* Preparation of system sizing verification report for marine and utility system.
* Preparation of purchase specifications for rotary equipments like Diesel engine generator set, Azimuthing thrusters, centrifugal and screw pumps, air compressors and static equipments like Exhaust and thermal oil boilers, sewage treatment plant, Air dryer and
Incinerator.
* Review of basic design stage GA and MA drawings according to rule requirements, DSME
standard practice.
* Clarifications with DNV for application of rules.
* Technical clarification for building specifications with owner according to rules &
regulations and design requirements.
* Technical evaluation of vendor quotations for all the marine equipments
* Arrangement and conduction of technical clarifications meetings with vendors for all the marine equipments including Main engine generator set and Azimuthing thrusters.
* Package engineer for Azimuthing thrusters, Air compressors, Air dryers, Pumps & Fire fighting systems.
* Conducting the material handling study and preparation of material handling report
* Lead discipline engineer for HAZOP and HAZID study.
* Lead DSME engineer for Working Environment study as required by NORSOK standards.
* Issue and close out of technical queries.
(3) Frigstad's HF-D90 – Semi submersible drilling rig September 2005 – December 2005
* Water depth – 10,000 ft. Classification – DNV
* Operation Area: Philippine (Also, West Africa, GOM, Brazil)
ROLE:
* Worked as a Process engineer and Package engineer for rotary and static equipments for bid stage.
RESPONSIBILITES:
* Preparation of PFDs for marine and utility system.
* Preparation of system sizing verification report for marine and utility system.
* Preparation of purchase order specifications for rotary equipments like centrifugal and screw pumps, air compressors and static equipments like heat exchangers, sewage treatment plant, water makers and water treatment equipments.
* Review of bid stage GA drawings according to rule requirements, DSME standard practice.
* Technical clarification for building specifications with owner according to rules &
regulations and design requirements.
(4) K-LINE's LPG Carrier July 2005 – January 2006
* Capacity – 38,000 m3 Classification – NK
* Cargo's to be handled – Propane, Butane, Anhydrous Ammonia
ROLE:
* Worked as a Package engineer for rotary and static equipments for basic and detail design stage.
RESPONSIBILITES:
* Preparation of Purchase order specifications of all the major machinery packages of engine room according to owner specifications, international rule and regulations (NK) and
DSME's standard construction practices.
* Vendor meetings and technical evaluation of the vendor quotation according to basic design. Clarification of the specification deviations.
(5) Exxon-Mobil's Sable Compression Platform – Fixed platform May 2005 – April 2006
* Gas Compression of 600 MMSCFD.
* The Compression platform will be bridge linked to the existing Thebaud process platform
(and wellhead) complex. Water depth at Thebaud is 29m.
ROLE:
* Worked as a Facility engineer to support the mechanical team in the detail engineering, construction, installation and commissioning stage.
* The main role was to coordinate with several design discipline as well as owner to close out outstanding issues of mechanical discipline.
RESPONSIBILITIES:
* Preparation of test & commissioning procedures according to rules and regulations, DSME
standards.
* Follow-up and closing out of HAZOP action items for vendor packages.
* Updating of Material handling study as per As-Built status.
* Closing out of FAT punch items, nonconformity reports, owner and class technical queries.
* Acted as a facilitator in the various meeting with owner and vendor.
(6) BAKRI's LPG Carrier November 2004 – February 2006
* Capacity – 35,000 m3, Classification – DNV
* Cargo's to be handled – Propane, Butane, Anhydrous Ammonia
ROLE:
* Worked as a Package engineer for rotary and static equipments for Detail design,
Construction and Installation stages of the project.
RESPONSIBILITES:
* Preparation of Purchase order specifications of all the major machinery equipments in engine room according to owner specifications, international rule and regulations (DNV)
and DSME's standard construction practices.
* Vendor meetings and technical evaluation of the vendor quotation according to basic design. Clarification of the specification deviations.
* Vendor data review. Handled rotary equipments like Air compressor, Centrifugal and screw pumps and static equipments like Composite boiler, Fresh water generator unit, Fresh water supply unit, Bilge water separator, Incinerator, Sanitary discharge system and Auto filters.
* Review of vendor data for all the equipments included in cargo handling system like Inert gas generator, Reliquifaction plant, glycol system, cargo compressors, cargo heater &
coolers etc. The main work scope was to review the V/D keeping in mind installation, operation and maintenance point of view. Multidiscipline coordination during detail design stage.
* Class & Owner's comment clarification and close out.
(7) Exxon-Mobil's Kizomba-B TLP – Surface wellhead platform Feb. 2003 to Dec. 2004
* Classification – DNV
* Production capacity 250 kbopd, Water depth – 1010 meters
* Kizomba-B represents the second phase of twelve discovered reservoirs in Block 15
offshore Angola. SWHP is connected to FPSO vessel. The oil is produced by SWHP and processed on FPSO and is offloaded by offloading system.
ROLE:
* Worked as a Package engineer for rotary and static equipments and have done support work as a Process Engineer at Detail design, Construction, Installation, Commissioning and Sail-away stages of the project.
RESPONSIBILITIES:
* Preparation of Purchase order specifications according to owner specifications, international rule and regulations and DSME's standard construction practices.
* Technical evaluation of the vendor quotation according to basic design.
* Have handled rotary equipments like Air compressor, Diesel engine-generator set and static equipments like Chemical Injection package, Air dryer, Skim pile, ROV, Diesel centrifuge, Fresh water generator unit, Sanitary & potable water supply unit, STP,
Hypochlorite generator package etc.
* Perform multidiscipline technical analysis and review of vendor data for package design, sizing calculations and also check tie-in points for Piping and Electrical discipline.
* Multidiscipline interface coordination during detail design stage and coordination with production team during construction stage.
* Attend FAT, Check FAT reports and closing out vendor punch list
* Review PDMS modeling for installation clash check and piping tie-in point check. Review and approve equipment installation drawing. Solve installation problems with multidiscipline coordination.
* Preparation of preservation procedure for mechanical equipments according to vendor recommendation and yard standards.
* Commissioning follow up and support work. Preparation of RFI and ACI (Change work) for any additional work. Closing out engineering issues with owner, Closing out design deficiency reports, Closing out owner punch items. Prepare equipment Sea-fastening schemes for platform sail-away.
* Carry out design changes in vendor skid to close the owner comments. Interface engineering for Owner furnished equipment – ROV.
* Relief valve sizing calculations according to API-520 & API-2000 for HAZOP close out.
* Separator sizing and design calculations (Skim pile). Pump head verification. Deluge system hydraulic calculations (PIPENET) check.
ADDITIONAL PROFESSIONAL ACTIVITIES
* Insulation requirement calculations for HC-Pipeline on Chevron's Sanha condensate project
* Insulation requirement calculations for Drain tank on Exxon-Mobil's Sable compression project
PUBLICATIONS
* "Dynamics of Petro-Pile" Kaushal Shah, Jae-Young Lee. DSME Engineering Review
2005.No.1 Vol.60
* "Tidal effects influence design of water – disposal piles" Kaushal Shah, Jae-Young Lee. Oil
& Gas Journal / Week of Nov.14, 2005
AWARDS
* "Work Excellency" Award for single handedly completing preparation of PS, conducting vendor meeting and doing vendor selection of ODFJELL Semi Submersible Drilling Rig from DSME –Korea, May, 2006
* "Work Excellency" Award for external and internal interface management during detail design stage of Kizomba-B TLP from DSME –Korea, October, 2004
ACADAMIC QUALIFICATIONS
* M.Tech in Process Engineering from Indian Institute of Technology – Delhi, India with
C.G.P.A of 9.1 and top position in the batch.
* B.E. in Chemical Engineering from Nirma Institute of Technology – Ahmedabad, India with 77.7%.
SPECIALIZED TRAINING
* Four Day professional training for Computation Fluid Dynamics (CFD) software Fluent 6.0
and Gambit 2.0 at Fluent Inc. Pune, India.
* DNV Training on "Safety evaluation of process system – Offshore"
COMPUTER PROEFFICIENCY:
* Languages Known: C,C++, FORTRAN
* Packages Known: HYSYS, PDMS, FLUENT-6.0, GAMBIT-2.0, V.B-6.0, MATLAB, ORACLE-
8.0, SAP, Microsoft Office

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2501 to 2550 of 6396)

Go to Search Parameters...

Brief Description

Looking to contribute to the success of a company with my experience, hardwork and dedication to work as a team and make a difference preferably working on Petroleum, Gas or Cargo ships or Oil Rigs

I can work in supply boats, service ship and bunker ship

Around 12 years in the field of Instrumentation and Control System in Olefins Gas Cracker, Petrochemical and Copper Smelter & Refinery Sectors.

"Seeking Professional and Challenging career in Oil/ Gas/ Refinery/ Petrochemical sector. Offer extensive Field experiences in Maintenance/ Shutdown/ Commissioning/ and Construction of Plant and Rotary / Static Equipment”

Entry level Engineer with a Masters in Petroleum engineering and a Bachelors of science degree (cum laude) in Chemical engineering

I am an electronic ingeneer

Instrumentation maintenance

PLC, DCS ABB 800xA, Field Instrumentation

The posting also mentioned candidates with experience testing and reworking oil and gas wells. About 50% of my time over the past three years has been dedicated to this specific kind of work. I want to work hard and being a respectful engineer in the world.

Worked as a LAB TECHNICIAN for 4 years in oil & gas ind.

Ananlysis and design of steel structures, shelters and racks using STAAD. Design of soil supported and pile supported foundations using Foundation 3D, Mat 3D and MS-Excel

-Primavera (Deep knowledge and experience) / SAFRAN planning program / AutoCAD 2-D (Professional use) /

Proactive HSE expert with 13+ years expertise encompassing HSE in Oil and Gas Construction; accustomed to project Management and coordinating resources effectively to achieve targets within often stringent constraints. Energetic, dynamic, relishes challenges and demonstrates indepth analytical Skill

Working as a Sales engineer in a well established LLC. It’s a 20 years old company which deals with Instrumentation, Automation, Compressors, Air Operated Pumps, Valve Automation, Pneumatic Tools, Transmission Products and Material handling.

HSE, Risk Assessment & Loss Prevention Engineering in Oil & Gas Field

Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.

Senior Drilling Engineer & Supervisor

11 + years in oil & gas sector, process & operation expert. Master of technology in chem engg

I have over 16 years of oil and gas experience in both design engineering and EPC projects in Nigeria and India. I am presently working at L&T, E&C Division, Upstream Engineering, New Delhi as a Project Manager.

1st class Mechanical Engineering diploma in the year 1986. Coordinating of Site Project Management staff for the construction of the Oil & Gas Project.

Over 14 years of experience in the field of Welding Technology as Welding Manager / Welding Engineer in quality control activities of fabricated products such as Boiler & Pressure Vessels, Heat Exchangers, Columns, Storage tanks/spheres, Piping spools and Heavy structural steel items for petroch

Maintenance, Repair, Overhauling of static and rotating equipments, turbo machineries in Petrochemical plants (Turbines, Centrifugal and reciprocating compressors, Diesel engines, Pumps, Strippers, Distillation Columns etc), Safety permits, Shut down works, etc.

Strong backgroun in all asspects of Integrated Petrophysics from data acquisition and qyality check, Open and Cased Hole formation evaluation and reservoir monitoring, formation pressure analysis, to petrophysical parameters and Core Analysis skills.

WSS,WSE,WSI, experience on remote,land, desert, harsh environments. Experienced in exploration, oil,gas, appraisal, horizontal well drilling, Experience on all mud types,fishing, sidetracks, well control. Managed many multinational operations. Mentoring junior engineers. Strong QHSE commitment.

Oil/Gas Rotating Equipment / Marine Engineer

Total Experience 14 Years – [Gulf 10 Years & India 4 Years]

November 1998 - Present at Reliance Industries Limited [Refinery Complex]

Ten(10) years of experience in analysis, design and detail engineering of offshore structures and onshore structures associated with Oil & Gas Sector, Petro-Chemical and Petroleum Industry.

Reservoir engineer (BSc Petroleum Engineering ) with 4+ years of experience in the field of designing of reservoirs exploitation. Also, strong background and skills concerning petroleum engineering. He is looking for a worldwide employment opportunity.

Reservoir development, geologic modeling Landmark

Experienced about fourteen years in Refineries,Gas,Petrochemical and industrial units including teaching.

UNIX / LINUX / AIX Systems Administrator

A position with strong emphasis on Industrial Automation & Control with direct exposure to System Design, Configuration and Implementation. Support responsibilities utilizing strengths in the areas of project management and system architecture.

5.50 yrs Experience in Oil/Gas & Power industries on Rotating Equipments

Instrumentation engineer with three year exp in automation field like PLC,DCS,SCADA

Instrumentation engineer with 3 years experience in commissioning and maintenance field

Instrument & Control Engineer

Instrumentation Engineer with good knowledge of INtools & SmartPlant Tools

Junior Drilling Engineer, Completion, optimizing mud...

Electronics and telecomm engineer working as plc programmer

I am HSE supervisour with Eni in Milano

Diploma of Associate Engineer (D.A.E) in Instrumentation Technology

Team Player, Work with local and international contractors, International working conditions, QHSE supervision, Oil & Gas Logistics, Sales / Marketing / Port activities, Containers Terminal / Operations Management Assistance, Freight forwarding / Construction / Purchase / Stock Management

I have 4 plus years of oilfield experience as Senior Mud in onshore Rigs,I have been working in EMEC (Egyptian Mud Engineering & Chemicals Company) in KSA Branch with SAUDI ARAMCO, I am having B.Sc. degree in Chemical Engineering and also have carried out 2 years of Petroleum industry Diploma.

Mechanical QS / Contracts Engineer With nearly two years experience in various kinds of oil, refinery & gas project in Overseas.

calibration, Mentinence, Installation, And wired the all kinds of control panels.Undestand all kinds of drawing.

Excel, Word, PowerPoint, Fortran, Matlab, AutoCad,Computer program and spreadsheet development,Design of new and existing equipment, PFD’s PID’s and associated documentation,Heat and material balances

5 yrs of exp in research and instrumental analysis

I have been working in the oil field since 1999. I have worked on onshore fields in the south of Algeria for SONATRACH company and her drilling and cementing department as drilling supervisor.

Petroleum Engineer with 13 years of experience with International Oil/Gas Company

First Prev [ 51 ] 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out