Resume - looking for mechanical/welding inspector position

Misco Jobs

Resume #54096

CONTACT INFORMATION:
View contact information...

Post applied for QA/QC Mechanical Engineer
Personal Information:

Date and place of birth: 09-09-1980 Hyderabad
Nationality: Indian
Martial status: single

Education:
Bachelors of Technology (MECHANICAL ENGINEERING) from Jawaharlal Nehru Technological University (JNTU), Hyderabad, Andhra Pradesh, INDIA.

Certified Welding Inspector
American Welding Society
Certificate No. 05061821.

Saudi Aramco approved QA/QC Mechanical/Welding inspector (SAP # 70005449)

Professional Experience:

(Around 3 years of experience in petroleum industry as a QC mechanical / welding inspector)

Jan 2006 - Present

Faysal M. Qahtani Sons (FMQ) Co.
Al –Khobar, Kingdom of Saudi Arabia
International pipeline and offshore contractors association.
AWS sustaining member.

Project title: Hawiyah NGL Recovery Plant (HNRP) to Shedgum Gas Plant (SGP) C2+NGL (Inspection of cross country, buried externally fusion bonded epoxy (57 km of 24", 58 km of 28" pipelines)

Client: SAUDI ARAMCO

Position: QA/QC Mechanical engineer

Duties & Responsibilities:

Supervision of company existing projects with particular attention to Quality Control/ Assurance, responsible for the execution and monitoring of approved Quality Control/Assurance Manual in the field of Mechanical Engineering and Piping. Preparation and submittal of quality documents to QC Supervisor and /or QA-QC Manager.
Perform in-process and final inspection of mechanical/piping/welding activities that includes, welders testing and on-going shop and /or field welding activities: marking of welds on isometric drawing: recording of completed field/shop weld: verify dimensions of pipe work: supervise hydrostatic and pneumatic testing among others.
Coordinate with client and sub-contractors representative on daily basis to resolve any quality problem or issues.
Preparation and compilation of quality reports/records and other quality related document for activity acceptance and final project handover.
Assist and perform other function as maybe directed by QC Supervisor.

Jan 2005-Dec 2005

M/S REAL- Sister Concern of Reliance Industries Ltd.
Jamnagar, Gujrat, India
Position: Quality Control Engineer.

Duties & Responsibilities:

Inspection of incoming raw materials such as pipes, elbows and structural steels and plates among others.
Verification of physical and chemical properties of construction materials eg: tensile, yield, elongation and its chemical properties.
Conduct process inspections eg: joint fit-up, dimensional check, verification of electrodes with particular attention to the approved welding procedure, welder identification, conducts preheating and post heating inspections of pipe materials.
Final visual inspection of welds and selection of NDT methods and percentage as per specification.
Witnessing of UT, MPT, DPT and interpretation of RT films.
Witness of hydrostatic testing and preparation of hydro test packages.
Experience in fabrication and erection of structural, equipments and columns.

May 2003-Dec 2004

M/S Hyfab industries
Cherlpally, Hyderabad, India
Position: NDT Inspector/Piping supervisor

Duties & Responsibilities:

Inspection and verification of material test report or certification in compliance with material specification and standards.
Conduct visual inspection of SMAW, GMAW, >AW process.
Conduct final weld visual inspection and selection of NDT methods and percentage as per specification.
Witness UT, MPT, DPT and interpretation of RT films.

Specialization:

Having experience n, Refineries TURN AROUND (shut down jobs)
Conversant with relevant Indian & international codes & standards & specification like ASME secV, VIII, & IX. ANSI B31.1, B31.3, API 1104, AWS D1.1, IS 7310, IS 7215, BS 5135.
NDT Inspection activities(UT,MPT,DPT,RT & VT)
Having knowledge in various welding methods of SMAW, GMAW, FCAW, GTAW, SAW process etc.
Having knowledge of WPS, PQR & Performance Qualification for various welding process.
Awareness about mechanical testing e.g.

Tensile testing
Bend testing
Impact testing
Fracture testing

Training/Seminars Attended:

Certified Welding Inspector Seminal & Examination.
American Welding Society
May 2005.

Internal Auditor Training for Quality Management Systems (QMS)
Faysal M. Qahtani Sons Co
FMQ Building, Al Rakha, Dammam
Kingdom of Saudi Arabia
March 20-21 2006.

ASNT (SNT-TC-IA-2006)Level II Certification
SIS Institute of Non-Destructive Testing
* Ultrasonic Testing
* Radiographic Testing
* Magnetic Particle Testing
* Dye Penetrant Testing

SKILLS:
Languages;
Urdu: mother language
English: good written and spoken
Arabic: Read, Write, Speak (working knowledge)
Computer and office work:
Operating System: Windows 95/98, 2000,
Ms-Dos, Ms-Word, Ms-Excel & Ms- Power point,
Auto CAD, Pro/E.

Interests:
Reading, listening to music and traveling.

Licenses:
Indian & Saudi Driving License

References:
To be given upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2951 to 3000 of 6432)

Go to Search Parameters...

Brief Description

Purchasing Officer possesses Product costing, Price negotiation, Suppliers sourcing skills and Demonstrate ability to read blue print design and evaluate and testing of quality product.

Subject: Apply for a job.

10 YEARS EXPERIENCE IN PROJECT DESIGN , ERECTION & COMMISSIONING AND MAINTENACE OF PETROCHEMICAL AND REFINERY PLANTS. MAIN AREA OF CONCERNS : HONEYWELL TDC 3000 DCS , FOXBORO I/A SERIES SYSTEM

More than 10 yrs in Oman & India activities are directly related to QA/QC/inspection during design, procurement and construction of various projects. Fertilizer , Refinery, Petrochemicals, Power Plant, Acid Plant, Pipeline, Production/Shipping Stations & Oil Field

To provide significant contributions in software engineering leadership and technical solutions by performing all software processes and management tasks in an environment using new technologies with a team-oriented group.

I am seeking the position of MWD Engineer/Supervisor/Consultant/ Independent Coordinator.

Technical Support

To obtain a full time position in Chemical Engineering beginning in the fall of 2002.

I am a maintenance Team leader for all trade in the chemical plant. I have over 15 years instrumentation experience. 3 Years management experience.

Sandra H Evans. A Geology graduate with a first class honours Geology degree and an MSc in Basin Evolution and Dynamics. I have experience using seismic interpretation software such as Schlumberger IESX Geoquest, Geovis, the Kingdom Suite and ERMapper. I also have some research experience.

The scope of my work concerns Pressure Transient Analysis, Well Test Design, Reservoir Simulation, Multiphase Testing, Optimising Perforations in weak unconsolidated formations and designing artificial lift mechanisms.

To obtain an entry level engineering position that promotes continuous educational and professional development while solving hands on and theoretical problems

I am seeking the position of MWD/LWD Engineer/Supervisor/Consultant. I have 7 years exp. as MWD Engineer prior to maintenance of the MWD Systems.

B.ENG. MECHANICAL ENGINEERING (SECOND CLASS UPPER DIVISION)

I am a Civil Engg.( Diploma ) with 13 years of experience in pipe line (Sewerage and Drainage ),Buildings at various positions. I can assure you to deliver the best from me.

Petroleum Engineer with over 6+ years of International experience in Reservoir Simulation, Drilling Engineering, Well Log Interpretation, Well Test Analysis and Project Management. He is a proven Engineering and Technical Communicator.

I have over 10 years of North Sea drilling experience. I have attended many oil company-planning meetings for my current employer and have been the point of contact for various projects in the last 3 years. This has increased my interest in project planning & implementation,

Petroleum Engineer with 10 years experience, some legal and accounting skills, contract negotiation as well. Will consider any position, including entry level as I have been out of the oil business for some time. Will also consider any location.

System Design for power systems, Project Management, Basic PLC programing, Netwroking

Experience in Mechanical Engineering Design, skilled in detailed design of piping system for Petrochemical plants, Power Plants, Oil & Gas project. Also knowledgeable in 3D modelling using PDMS, Autocad Inventor 2008 with reference to JIS, ANSI, and ASME. Detail Design of Pressure Vessel.

Experience with service and repair of Electrical Panels and Equipments, electrical testing and various machine controls like PLC and AC drives. Good knowledge of PLC programming ( ladder diagrams), technical drawing and implementation.

Now I'm working in Rashid Petroleum Co. as a Subsea Engineer

4 yr degree in Metallurgy + 2yrs eperience in an integrated steel plant , good at Analytical skill

Diploma in Mechanical Engineering with 8 years Experience in Mechnical Maintenance(Rotary and Static equipments )at Oil and Gas fields

I bring with me a Bachelor of Science degree in Earth and Environmental Science - major in Geology along with nearly five years of experience with Geologic Interpretation and Technical Support. I also have an applied degree in Petroleum engineering from SAIT with a little experience in reservoir eng

12 Years on offshore industry working with subsea installation of equipments (manifolds, suction piles, PLETS etc) and flexible lines in shallow and ultra-deepwater; subsea connections; pull-ins; remote and dive assisted interventions; inspections, maintenance and subsea repairs; stand alone equip

Good technical skills, Like to work with computers, Internet, Driving license category B.

M.Sc Pipeline Engineering graduate who is looking for an opportunity to work as a Pipeline stress analysis engineer

Student of master of petroleum engineering

Intools, SPR,

I have over three years experience as a piping design engineer for process piping, fire protection piping. Familiar with National & international standard, pipe Routing, MTO, Data sheet & Drawing checking etc. Completed BE (Mechanical) in 2004. Knowledge about: Auto cad, Pipe-net & caesar II Softwar

To seek a position to utilize my knack in Petrochemical tech field, which offers professional growth while being resourceful and innovative and to join a company where my knowledge & skills are utilized for the growth of the organization and my career growth. Wishes to work in a challenging environm

MASTER IN GEOLOGY

Mechanical engineer who has 3 years of sales experience in oil feild

Working as Petroleum Engineer since 17 years. Engineer, Supervisor and Manager roles in drilling, wellcompletion, production and workover operations in oil and gas E& P .

Operation / maintenance work class ROVs:Drill Support, PipeLying & Jacket Installation

2.6 years of exp. in piping consultancy as a stress engineer

I have 3 years Experience in PDS field and i have completed Mechanical Engineering

17 Years exp DRILLING & COMPLETION ENGINEER / SUPERINTENDENT

I am presently working as Manager - Operations (Process) with IndianOil Petronas for their 6.0 lakh TPA LPG Import/Export Terminal at Haldia, India. I have over 20 years of experience in the construction, commissioning & operations of LPG Filling Plants & Cryogenic LPG Terminals.

Electrical, able to read interpret electrical diagram and flow control from 11kv step down 400 V, and from 400 Vac to DC voltage to supply all DC drive motors.

Upstream oil and gas production engineer/process engineer/facility engineer- well testing/gas lift optimization/ separation and gas compression facilities-offshore installation

Maintenance Planner with SAP System

DP Technician/ ETO/ DP Operator

PDS, Piping Designer, Smart Plant Review, AutoCadd, PDMS

Management, Project Manager, Tender Coordinator, Planning

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Instrument and control technician

looking for mechanical/welding inspector position

Educational Qualification: Passed Diploma in Software – June 1999 Diploma in CAD - March 1991 Diploma in Piping D’man – June 1987 Diploma in ITI D’man (Mech) – January 1987 Plant Designing Management System (PDMS) Ver.11.5

First Prev 51 52 53 54 55 56 57 58 59 [ 60 ] 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out