Resume - Good research aptitudes intellectual, potential and creativity.

Misco Jobs

Resume #54461

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Great skills in computer applications such as MS word, Excel, Powerpoint, Internet, Photoshop
And Chemi-CAD. Well control to some computer languages
Like Visual Basic.Valid Driving Licence/U.A.E
.
------------

OBJECTIVE:
------------
To Obtain full time job within an established Chemical
Engineering department, which is committed to research and
Solve problems involving the production or use of chemicals,
Where my experience can be further developed.
------------

WORK EXPERIENCE:
------------
> Painting Plant in Homes.
Summer 2001
Trained on different steps during the production of the paint.

> Fertilizing Plant in Homes
Spring 2002
Trained on different production units of fertilizer such as UREA UNITS, AMMONIA UNITS, AMMONIUM NITRATE …ECT.

> Homes Oil Refinery
Summer 2002
Trained on all stage to get the outcome production under Atmosphere distillation such as, Gasoline, Diesel. Kerosene.. ect and under Vacuum distillation such as Lubricants oil. Beside the deeply studies for the operation condition of the different units.

> AL-Matine Plastic Plant in Homes.
Summer 2003

Trained on production stage for the polyetelene(PE)(semi produce), polystyrene
And trained on the quality control of the section

> Al-Madar Detergent Plant in Damascus
Till July 2004
Trained on the different preparation of the raw materials and running the production line and different addition into the raw material to get the end production.

>SHARLU company for lubricant in SHARJAH
2005 till 18 Aug

Trained on different equipments related to LUBE OIL testing such as Viscometer,Cold Cranking, TAN,TBN,IR. Also trained on developing formulations and carryout used oil analysis.
>Working in EMIRATES INDUSTRIAL LABORATORY(EIL) in Dubai
UP TO NOW
Working in oil section on different lab tests such as flash point, viscosity density, distillation rang, water content, base sediment and water, pour point, asphaltens,
Total acid number, total base number, Reid Vapor pressure…etc.all tests have done by the ASTM METHOD. Beside that I can setup lab equipements such as ICP, IR, atomic absorbent(A.A.S), GAS CHROMATIGRAPHY(GC) and color spectrometer
I was working also in waste and potable water section and analysis different test and parameter belong them such as PH value, Electrical Conductivity(EC), Calcium, Magnesium, Sodium Potassium, Chloride, Sulphate Carbonate, Biocarbonate, Total Dissolved Solids, Total Alkalinity as CACO3, Total Hardness as CACO3…ect, All tests have done by APHA METHODS
In addition to that I can analyze the different grade of the steel by chemical ways and some equipment like OE
------------

EDUCATION & CERTIFICATION:
------------
>University of AL-Baath, Syria
Sep2003:
Bachelor's Degree in Chemical Engineering
Thesis: Studying the Effect of Adding Organic Inhibitors on how fast the carbonic steel corrosion in the water mixed with the Syria Crude Oil.

> Al-Basel Invention Center.

August 2004:
A course in development and invention for obtaining Patent Certification
------------

Training Courses:
The courses titled:
A Workshop on Organizational Leadership and Teamwork *
New Trends in Management *
How to be effective in public speaking *
Distance Learning *
KAIDS software program, Diabetes Care &Management in U.A.E *

------------
Provide any additional information including your personality, hobbies, references, citizenship, etc.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3501 to 3550 of 6396)

Go to Search Parameters...

Brief Description

I am candidate who has excellent research and development skills along with good manufacturing experience.

Civil engineering graduate with 13-years of professional working experience as a Senior Document controller in gas and oil industry. A computer literate, familiar with EDMS, QVP and Plantdoc programs used in project documentation.

Profile Total of 6.5+ years of IT experience with 5.5+ years of SAP R/3 experience in ABAP Programming in the functional areas of MM, SD, PP, PM, FI & Payroll.

Proficient in physical and wet chemistry analyses using gravimetric, titrimetric, and spectrophotometric techniques. Computer Software knowledge in HYSYS,MAPLE, ASPEN, HP Chemstation, Microsoft Office, Microsoft NT.

Petroleum Engineer with 6+ years of experience in the Oil & Gas Industry. Specifically in Middle/Heavy Oil. Strong Knowledge in Production Asset Management, ESP and Gas lift Design and Operations, Horizontal and conventional wells, Cyclic Steam Injection and New Technologies for E&P Industry.

With a Hons. Diploma in Civil Engineering, I have totally 13 years of experience , 6 years experience in Large Engineering/Construction, oil & gas & Process Plants related industry and Post Diploma in Computer Application

Dear sir, I would like to submit my application form for the post of the petroleum engineer. Here is my Cv attached below. If you want to know other information or document, please let me know.

Geologist looking for employment in the Oil Industry

Oil and Gas Piping and Ppeline Designer And Expert in all Drawings and Design Related to Pipeline

More than five (5) years working experience in Non-Destructive Testing and Engineering Inspections for Onshore / Offshore and refineries industries. Worked with varios major client e.g Petronas Carigali Sdn. Bhd, Petronas Gas Berhad, Optimal Chemicals (M) Sdn. Bhd, Exxon Mobil Exploration And Produ

I am full confident about the any job of analyzer/instrumenation for detail see my resume

Good research aptitudes intellectual, potential and creativity.

Mechanical Designer Engineer

Profesional Employer with International acknowledge Certification

Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.

Shaped Charge Engineer

Flow Assurance Engineer

I have 30+ years experience as a Mud Engineer, 18 years International experience. I have held positions as Country Manager, Ops. Manager, District Coordinator and Fluids Coordinator. I am experienced in all types of Water/Oil/Synthetic based fluids, Silods control and waste disposal.

Petroleum engineering with reservoir engineering & field development experience

Knowledge of fire protection systems and maintaining the safety audit system

Bachelor degree in Petroleum and Natural Gas Engineering May – 2007.

GOOD APTITUDE,COMMUNICATION SKILLS,MANAGING SKILLS,TECHNICAL SKILLS

Piping Engg. skills including

Becholar in chemical Engineering (production / project)

Around 8.50 years experience in Electrical/Instrumentation Engineering and Maintenance in the Industrial sector, extensive experience in end-to-end execution of EPC Projects including supervision of Installation, Calibration, Testing, Pre-commissioning, Operation and Maintenance of Plant Instrumenta

I'm Tommon Mathew working with mott macdonald as a project engineer in oman for various oil and gas projects.

Mechanical piping supervisor

Obtain above position in fast growing IT organization offering challenge, responsibility and advancement opportunities while utilizing my best skills in System administration

Autocad & Inventor Draftsman

A Drilling Engineer with expertise in drilling rig supervision, development of drilling, work-over and abandonment procedures. Excellent interpersonal skills combined with the ability to work collaboratively with other team members have been my formidable strengths.

B.E. Petroleum, Working in Workover Department

Diploma In Instrumentation Engineering In Aug 1988 (3 Years Duration) +Amie Eqvt To B.E

DCS Engineer With Yokogawa CS3000 experience

An effective engineer possessing good communication skills, combined with proven technical and organizational abilities. Education, qualifications and experience gained through significant design applications and management positions performed in the US and the Middle East.

Project Leadership: project development, estimation, engineering, installation, field start-up and commissioning.

Electrical and Electronic background. Experience with ESPs, Completions and Production Engineering

Well Service Supervisor or Coil Tubing Supervisor

To seek a position that maximizes my knowledge and technical expertise in the field of Petroleum Engineering & technology, Electronic mechanic, Computer system application, electronic device assembly and trouble-shooting, Design & process engineering.

Degreed Petroleum Engineer, Production, Workover, Completion, Planning, Programming, Procedure Writing, over 20 years hands-on experience, Field Supervision, Mentoring Local Staff, Excellent Communication and Human Skills, Good Overseas exposure, Adaptable to most current software and applications.

I am a highly talented mechanical technician/training coordinator/ instructor & supervisor, able to successfully operate within extremely competitive and high profile markets, drawing upon my excellent communication and interpersonal skills and enthusiastic approach to achieve outstanding results.

Obtained Greenbelt Certification from DaimlerChrysler and Black Belt Steering Committee for solving a complex rear door window noise issue on Dodge Durango by using Shainin methodology.

GIS-Geophysicist/Databse Administrator

During 13 years I was working at rig site on many different wells. I know very well Rig equipment, Drilling tehnology, Mud properties, Fishing, Coring. In many situation I solved stuck, kick and lost circulation problems.

I am a Geophysicist with seven years experience in Petroleum Exploration. Extensive experience working with multidisciplinary teams on exploration, interpretation and prospect generation.Experienced geophysics workstation user.Excellent computer skills and good knowledge of technical software.

I am experienced cased hole engineer

Mechanical engineer looking for job in mechanical field

Diploma in Mechanical Engineeering, Diploma in Materials Management and Diploma in Exports & Imports. Working in a Multinational Company M/s. Chemtex Consulting of India Pvt. Ltd, India Since Apil’ 2004 as Procurement Engineer

Certified Chemical engineer with Masters Degree

P&ID design draftsman. Very good experience in PDS2D, AutoCAD, AutoPLANT, Smartsketch, Microstation, I/RAS B, AutoLisp, AutoCAD VBA, Scripts etc.

I am M.Tech. in Applied Geophysics from IIT Roorkee. I am working for an OIL COMPANY as a Logging Engineer.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 [ 71 ] 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out