Resume - BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Misco Jobs

Resume #54569

CONTACT INFORMATION:
View contact information...

Work Experience:
No of Years: 6 years 10 months.
Field: Piping Engineering(Onshore)
Sector: Oil,Gas,Chemical,Petrochemical & Fertilizer.

Work Experience:
No of Years: 6 years 10 months.
Field: Piping Engineering(Onshore)
Sector: Oil,Gas,Chemical,Petrochemical & Fertilizer.

Mar2007-Present: Samsung Engineering India Pvt Ltd, New Delhi,
Piping & Planning Engineering Department
Designation: Senior Engineer – Piping

Working on Ethylene project as a Lead Assistant Stress Engineer
-Reactor lines, Wash tower line of 48",Rebioler,Steam
Header, Column to Exchanger overhead line of 58".
-Prepared Critical Stress Line list for MEG Project.

Foreign Training:
Attended Orientation Program in Seoul, South Korea from July 1, 2007 to July 6, 2007.

Jan 2005 - Mar 2007: Technip KT India Ltd.,Noida,Piping Engineering Department

Designation:Design Engineer - Piping

-Stress Analysis using CaesarII for Interconnecting Piping between equipment such as Turbine,Pumps,Exchanger,vertical and horizontal vessels with temperature limit from 550„aC to -230„aC.
-PDS Modelling for equipment and piping layout.
-Preparation of Piping Material Specification.
-Preliminary Piping Material Take off as a Lead Piping Engineer.
-Smart Plant P&ID
for Hydrogen,Sulphur recovery, Catalytic Cyclemax Regeneration Plant Ras Laffan Olefin Project(Ethylene Plant)& Propylene separation unit.
Foreign Assignment:
Technip Corporation, USA from 13th May 2006 to 13th July 2006 for their OXY CHEM, Pasadena PVC Project to handle piping and equipments layout in PDS, Piping detail engineering and Stress Analysis of piping by using Caesar-II, etc.

Aug 2004-Jan 2005: Avineon India Pvt Ltd.,Hyderabad,Piping Engineering

Design Department

Designation: CAD Engineer - Plant Design Automation

PDS jobs involved
- Plant Piping
- Equipment Modeling
- Schematic Environment
- Frame Work Modeling
- Drawing Manager
- Isometric and Extract BOQ

Smart Plant P&ID development for Ras Gas
Jobs involved:
a) Preparation of P&ID in Smart Plant b) Checking Inconsistency c) Preparing Symbols Smart Sketch and Catalogue
Manager, etc.

Oct 2003-Aug 2004: Projects and Development India Ltd. (PDIL), Noida
Piping Engineering Department

Designation: Mechanical Engineer (Piping)

Involved in Piping design and piping stress analysis in Caesar-II for Burrup Fertilizer and other critical stress analysis jobs, etc. Also, worked as co-coordinator for checking of critical piping stress analysis work done by Engineers India Ltd. Worked on Cross Country Pipeline for Burrup Fertilizer Project (Ammonia Transfer line from Ammonia storage tank to loading station at Jetty). Independently carried out stress analysis for Liquid Ammonia Piping for Indo-Oman Fertilizer and other critical jobs for IndoGulf Fertilizer, IFFCO, NFL, etc. Engaged in designing of piping for energy saving scheme of IFFCO-Kalol, Phulpur and Anola plants.

Aug 2003-Oct 2003: Dalal Mott Macdonald, Noida, Piping Department

Designation: Mechanical Engineer (Piping)

Preparation of Piping Layout, Generation of Isometrics from Piping Layout, P&ID and to estimate BOQ, etc.

Oct 2002-Aug 2003: Projects and Development India Ltd. (PDIL),
Noida
Piping Engineering Department

Designation: Trainee Engineer (Piping)

Acquired knowledge in Caesar-II software for Piping
Stress analysis. Also, taken training in Equipments and
Piping Design in PDS-3D modelling. Carried out independently stress analysis of Ammonia line between storage tank and Ammonia transfer pumps for Indo-Oman
Fertilizer Project.
Besides above, acquired good knowledge of International Codes and Standards required for Piping design and Conventional design of piping, etc.

Apr 2002-Sept 2002: Coperion Ideal Pvt Ltd., Noida, Design and
Manufacturing Department

Designation: Trainee Engineer

-Acquired knowledge in fabrication and manufacturing of Pressure vessels, Gamma Bends and Tees, Hopper, Bag filters, etc.
-Checking of GA and Isometric Drgs for Piping of Pneumatic conveying system and development
Drgs for Gamma Bends and Tees, Hopper, etc.

-Checking of Piping Isometric Drgs.

Mar2001-Mar2002: Sharp Tanks and Structurals Pvt Ltd., Mumbai, India

Designation: Trainee Engineer

Designing of vessels and connected piping work
Operation of Auto Cad for generation of
Piping Isometric drawings
Preparation of MTO/BOQ
Supervision of connected Piping Erection work at sites, etc.
Besides above, acquired adequate knowledge in various Codes and Standards pertaining to piping design work.

Projects Handled:

-Ras Laffan-Ethylene Project
-Oxy Chem PVC Project,Occidental Petroleum, Pasadena
-CCR-Catalytic Cyclemax Regeneration Plant,HPCL
-BAPCO
-Clough
-Exxon Mobil,USA
-Burrup Fertilizer Project, Australia
-IFFCO Energy Saving-Aonla-I & II,Phulpur-I & II and
-Kalol Plants
-Indo-Oman Fertilizer Project (Omifco)
-Ras Gas

Software Proficiency:

-Ceasar-II 5.10 Ver
-PDS Modelling
- Navis Works Jetstream V5
-Smart Plant P&ID & Review
-Micro station V7 & V8
-Auto CAD
-Smart Sketch
-Acrobat Reader
-Microsoft Office
-Windows
-LFM Viewer

Education:
Passed BE(Mechanical) with First class, Karnataka University in the year 2001.

Personal Details:

Date of Birth:29/12/1978
Sex:Male
Nationality:Indian
Marital Status:Single
Languages known:English, Hindi and Bengali

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6390)

Go to Search Parameters...

Brief Description

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

hard worker, work under pressure, creative, learning fast, energetic, have 3 languages:(arabic native language, english perfect, french good)

Working as reservoir engineer at maginal field for 5 years, can do petrel simuation, reservoir management.

Process Engineer, Chemical graduate, experience with engineering services for refining and petrochemical industries

Procurement Engineer

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

PIPEMILLS,PLATE MILLS, EXPEDITOR, VENDOR INSPECTOR, TECHNICAL WRITER ON PIPE SPECIFICATIONS QA/QC CO-ORDINATOR,

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out